___

• 1. Venturini M., 1980, A new sine wave in sine out conversion technique which eliminates reactive elements. In: Proceedings of Powercon 7, San Diego, Calif., pp E3-1, E3-15. 2. Gyugi L. and Pelly B., 1976, Static power frequency changers: Theory, performance and applications., ISBN 0-471-678000-7, 442 pages, John Wiley, Sons, USA. 3. Venturini M. and Alesina A., 1980, The generalized transformer: A new bidirectional sinusoidal waveform frequency converter with continuously adjustable input power factor, in Proc. IEEE PESC’80, 242-252. 4. Alesina A. and Venturini M., Solid-State Power Conversion: A Fourier Analysis Approach to Generalized Transformer Synthesis, IEEE Trans. On Circuit and Systems, Vol. CAS-28, No.4, Apr. 1981, pp.319-330. 5. Ziagos P. D., Khan S. I., Rashid M. H., 1985, Some improved forced comutated cycyloconverters structure, IEEE Transactions on Industry Applications, vol. IA-21, No 5, 1242-1253. 6. Ziagos P. D., Khan S. I., Rashid M. H., 1986, Analysis and design of forced commutated cycloconverter structure with improved transfer characteristics, IEEE Trans. On Industry Applications, vol. IE-33, No 3, 271-280. 7. Alesina A. and Venturini M., 1988, Intrinsic amplitude limits and optimum design of 9-switches direct PWM ac-ac converter, Proceedings of IEEE/PESC, vol. 2, 1284-1291. 8. Roy G., Duguay L., Manias S. and April G. E., 1987, Asynchronous operation of cycloconverter with improved voltage gain by employing a scalar control algorithm, IEEE-IAS Annual Meeting, 891-898. 9. Roy G. and April G. E., 1991, Direct frequency changer operation under a new scalar control algorithm, IEEE Trans. on Power Electronics, vol.6, No.1, 100-107. 10. Ishiguro A., Furuhashi T. and Okuma S., 1991, A novel control method for forced commutated cycloconverters using instaneous values of input line-to-line voltages, IEEE Trans. on Industrial Electronics, Vol.38, No.3, 166-172. 11. Sünter S. ve Altun H., 1997, Matris konverterlerde anahtarlama ve iletim kayıplarının hesaplanması için bir yöntem, IV. Elektromekanik Sempozyumu, Bursa, 66-70. 12. Klumpner C., Nilsen P., Boldea I., Blaabjerg F., 2000, A new matrix converter-motor (MCM) for industry applications, in Conf. Rec. IEEE Trans. Circuits System, vol. CAS-28, 319-330. 13. Nielsen P., Blaabjerg F., Pedersen J., 1997, Novel solutions for protection of matrix converter to three phase induction machine, in Conf. Rec. IEEE-IAS Annu. Meeting. 14. Schuster A., 1996, Drive-system with a digitally controlled matrix-converter, Feeding an ac induction machine power electronics and variable speed drives, 6. International Conference on, 378-382. 15. Kwon B.H., Min B.D., Kim J.H., 1998, Novel commutation technique of ac-ac converters, Electric Power Applications, IEEE Proceedings, 145(4), 295-300. 16. Munzer M., 2001, EconoMac The first all in one IGBT module for matrix converters, in Proc. Drives and Control Conf., sec. 3, London, UK. 17. Altun H., Sünter S., Matrix Converter Induction Motor Drive: Modeling, Simuation and Control, Electrical Engineering 86, December, 2003, pp:25-33. 18. Erdem E., Tatar Y. ve Sünter S., Matris Çeviricilerde Kullanılan Venturini ve Uzay Vektör Kontrol Algoritmalarının Karşılaştırılması, Fırat Üniv. Fen ve Müh. Bil. Der., 18 (2), 205-216, 2006. 19. Sunter S., A vector controlled matrix converter induction motor drive, PhD Thesis, University of Nottingham, U.K, 1995. 20. Sünter S., Altun H., Matris Konverterde Giriş Gerilimi Üzerindeki Harmonik Etkisinin İncelenmesi ve Kompanzasyonu, Elektrik-Elektronik Bilgisayar Mühendisliği 9. Ulusal Kongresi, Kocaeli, 17-22 Eylül 2001, s. 191-195.