SOĞUTMA HIZI ETKİLERİNE GÖRE ŞEKİL HAFIZALI BİR CuZnAl ALAŞIMIN X-IŞINI DİFRAKSİYONU İLE MONOKLİ-NİK DİSTORSİYON PARAMETRELERİNİN İNCELENMESİ

Austenitik fazdan M18R martensitik faza dönüşüm gösteren bakır bazlı şekil hatırlamalı alaşımlar için ideal sıkı paket yapıyı göstermesi açısından monoklinik distorsiyon parametresi (s) çok önemlidir[1]. CuZnAl alaşımları dönüşümden önce ve sonra uygulanan termal etkilere çok duyarlıdırlar, ve bu etkiler alaşımların kristalografik, morfolojik ve mekanik özelliklerinde önemli değişikliklere yol açabilir. Bu çalışmada farklı termal işlemlerin etkilerine bağlı olarak şekil hafızalı bir CuZnAl alaşımın monoklinik distorsiyon parametreleri X-ışını difraksiyonu kullanılarak hesaplandı. 

INVESTIGATION OF MONOCLINIC DISTORTION PARAMETERS OF A SHAPE MEMORY CuZnAl ALLOY BY MEANS OF X - RAY DIFRACTION DUE TO THE COOLING RATE EFFECT

Monoclinic distortion parameter (s) is important for Copper-based shape memory alloys which transforms from austenitic phase to M18R martensitic phase because the value of s shows the ideally close packed structure[1]. CuZnAl alloys are very sensitive to the thermal effects before and after the transformation, and this effects may cause important changes on crystallographic, morphologic and mechanical properties or the other transformation parameters of the alloys. In this study, the changes which occured on monoclinic distortion parameters of a shape memory CuZnAl alloy due to the effects of various thermal procedures have been calculated by using X-ray diffraction measurements.

___

  • 1. W. Dong, Roh, E. Lee, Y.G. Kim, 1992, Metall. Trans., A, Phys. Metall. Mater. Sci. 23A, p.2753–2760.
  • 2. W. Jıanxın, J. Bohong and T. Y. Hsu, 1988, Acta Metall. Vol 36, No. 6, p.1521-1526.
  • 3. A. Aydoğdu, Y. Aydoğdu, O. Adigüzel,1997, Ma-terials research bulletin, Vol. 32, No. 5,p 507-513.
  • 4. P.C. Clapp, R. Gotthardt, J.Van Humbeeck, “How would we recognise a Martensitic Transformation if it bumped into us a dark  austy night?”, Proc. of ICOMAT’95, Lausanne; Switzerland, August 20-25, J. de Physique IV, C8, 5, 11, (1995).
  • 5. N. Kayali, S. Özgen, O. Adıgüzel, 1997, Mater. Res. Bull. Vol. 32, No. 5, p. 569–578.
  • 6. T. Suzuki, R. Kojima, Y. Fujii, A. Nagasawa, 1989, Acta Metall. Vol 37, No. 1, p. 163–168.
  • 7. S.S. Leu, C.T. Hu, 1991, Metall. Trans., A, Phys. Metall. Mater. Sci. 22A, p. 25–33.
  • 8. M. Eskil, N. Kayalı, 2006, Materials Letters, 60, 630-634.