___

• [1] A. Akcil, F. Vegliò, F. Ferella, M. D. Okudan, and A. Tuncuk. 2015. A review of metal recovery from spent petroleum catalysts and ash, Waste Manag., 45, 420–433.
• [2] M. Marafi and A. Stanislaus. 2003. Options and processes for spent catalyst handling and utilization, J. Hazard. Mater., 101(2), 123–132.
• [3] M. Marafi and A. Stanislaus. 2008. Spent catalyst waste management: A review: Part I—Developments in hydroprocessing catalyst waste reduction and use, Resour. Conserv. Recycl., 52 (6), 859–873.
• [4] M. Marafi and A. Stanislaus. 2008. Spent hydroprocessing catalyst management: A review: Part II. Advances in metal recovery and safe disposal methods, Resour. Conserv. Recycl., 53(1–2), 1–26.
• [5] P. Dufresne. 2007. Hydroprocessing catalysts regeneration and recycling, Appl. Catal. A Gen., 322, 67–75.[6] C. Liu, Y. Yu, and H. Zhao. 2005. Hydrodenitrogenation of quinoline over Ni–Mo/Al2O3 catalyst modified with fluorine and phosphorus, Fuel Process. Technol., 86(4), 449–460.
• [7] I. Asghari, S. M. Mousavi, F. Amiri, and S. Tavassoli. 2013. Bioleaching of spent refinery catalysts: A review, J. Ind. Eng. Chem., 19(4), 1069–1081.
• [8] L. E. Macaskie et al. 2010. Today’s wastes, tomorrow’s materials for environmental protection, Hydrometallurgy, vol. 104(3–4), 483–487.
• [9] J. K. Pradhan and S. Kumar. 2012. Metals bioleaching from electronic waste by Chromobacterium violaceum and Pseudomonads sp, Waste Manag. Res., vol. 30(11),1151–1159.
• [10] A. Marafi, S. Fukase, M. Al-Marri, and A. Stanislaus. 2003. A comparative study of the effect of catalyst type on hydrotreating kinetics of Kuwaiti atmospheric residue, Energy & fuels, 17(3), 661–668.
• [11] H. Srichandan et al. 2015. An integrated sequential biological leaching process for enhanced recovery of metals from decoked spent petroleum refinery catalyst: a comparative study, Int. J. Miner. Process., 134, 66–73.
• [12] M. Motaghed, S. M. Mousavi, S. O. Rastegar, and S. A. Shojaosadati. 2014. Platinum and rhenium extraction from a spent refinery catalyst using Bacillus megaterium as a cyanogenic bacterium: Statistical modeling and process optimization, Bioresour. Technol., 171, 401–409.[13] D. Mishra, G. R. Chaudhury, D. J. Kim, and J. G. Ahn.2010. Recovery of metal values from spent petroleum catalyst using leaching-solvent extraction technique, Hydrometallurgy, 101(1–2), 35–40.
• [14] D. Mohapatra and K. H. Park. 2007. Selective recovery of Mo, Co and Al from spent Co/Mo/γ-Al2O3 catalyst: Effect of calcination temperature, J. Environ. Sci. Heal. Part A, 42(4), 507–515.
• [15] A. J. Chaudhary, J. D. Donaldson, S. C. Boddington, and S. M. Grimes. 1993. Heavy metals in the environment. Part II: a hydrochloric acid leaching process for the recovery of nickel value from a spent catalyst, Hydrometallurgy, vol. 34(2),137–150.
• [16] A. Ognyanova et al.. 2009 Metal extraction from spent sulfuric acid catalyst through alkaline and acidic leaching, Hydrometallurgy, vol. 100(1–2), 20–28.
• [17] H.-I. Kim, K.-H. Park, and D. Mishra. 2009. Influence of sulfuric acid baking on leaching of spent Ni–Mo/Al2O3 hydro-processing catalyst, Hydrometallurgy, 98(1–2), 192–195, 2009.
• [18] F. Ferella, A. Ognyanova, I. De Michelis, G. Taglieri, and F. Vegliò. 2011. Extraction of metals from spent hydrotreating catalysts: Physico-mechanical pre-treatments and leaching stage, J. Hazard. Mater., 192(1),176–185.