___

• 1. Sánchez-Hernández, Z. E., Domínguez-Crespo, M. A., Torres-Huerta, A. M., Onofre-Bustamante, E., Andraca Adame, J. and Dorantes-Rosales, H., (2014). Improvement of adhesion and barrier properties of biomedical stainless steel by deposition of YSZ coatings using RF magnetron sputtering. Materials Characterization, Volume:91, pp:50–57.
• 2. Im, K., Lee, S., Kim, K. and Lee, Y., (2007). Improvement of bonding strength to titanium surface by sol – gel derived hybrid coating of hydroxyapatite and titania by sol – gel Process, Surface and Coatings Technology, Volume:202, Number:4-7, pp:1135–1138.
• 3. Qu, J., Lu, X., Li, D., Ding, Y., Leng, Y., Weng, J., Qu, S., Feng, B. And Watari, F., (2011). Silver/hydroxyapatite composite coatings on porous titanium surfaces by sol-gel method. Journal of Biomedical Materials Research - Part B Applied Biomaterials, Volume:97 B(1), Number:1, pp:40–48.
• 4. Kim, H. W., Kim, H. E., Salih, V. and Knowles, J. C., (2005). Hydroxyapatite and titania sol-gel composite coatings on titanium for hard tissue implants; mechanical and in vitro biological performance. Journal of Biomedical Materials Research - Part B Applied Biomaterials, Volume:72(1), Number:1, pp:1–8.
• 5. Koch, C. F., Johnson, S., Kumar, D., Jelinek, M., Chrisey, D. B., Doraiswamy, A., Jin, C., Narayan, R.J. and Mihailescu, I. N., (2007). Pulsed laser deposition of hydroxyapatite thin films. Materials Science and Engineering C, Volume:27(3), Number:3, pp:484–494.
• 6. Nelea, V., Morosanu, C., Iliescu, M. and Mihailescu, I. N., (2003). Microstructure and mechanical properties of hydroxyapatite thin films grown by RF magnetron sputtering. Surface and Coatings Technology, Volume:173, Number:2–3, pp:315–322.
• 7. Lee, H. U., Jeong, Y. S., Park, S. Y., Jeong, S. Y., Kim, H. G. and Cho, C. R., (2009). Surface properties and cell response of fluoridated hydroxyapatite/TiO2 coated on Ti substrate. Current Applied Physics, Volume:9, Number:2, pp:528–533.
• 8. Billotte, W. G., (2000). Ceramic Biomaterials. In J. D. Bronzino (Ed.), Biomedical Engineering Handbook (Second Edi, pp. 642–675). Florida: Boca Raton: CRC Press LLC.
• 9. Murugan, R. and Ramakrishna, S., (2005). Development of nanocomposites for bone grafting. Composites Science and Technology, Volume:65, Number:15–16 SPEC. ISS., pp:2385–2406.
• 10. Bogdanoviciene, I., Beganskiene, A., Tõnsuaadu, K., Glaser, J., Meyer, H.-J. and Kareiva, A., (2006). Calcium hydroxyapatite, Ca10(PO4)6(OH)2 ceramics prepared by aqueous sol–gel processing. Materials Research Bulletin, Volume:41, Number:9, pp:1754–1762.
• 11. Li, H., Khor, K. A., Kumar, R. and Cheang, P., (2004). Characterization of hydroxyapatite/nano-zirconia composite coatings deposited by high velocity oxy-fuel (HVOF) spray process. Surface and Coatings Technology, Volume:182, Number:2–3, pp:227–236.
• 12. Fu, L., Khor, K. A. and Lim, J. P., (2000). Yttria stabilized zirconia reinforced hydroxyapatite coatings. Surface and Coatings Technology, Volume:127, Number:1, pp:66–75.
• 13. Fu, L., Khor, K. A. and Lim, J. P., (2001). Processing, microstructure and mechanical properties of yttria stabilized zirconia reinforced hydroxyapatite coatings. Materials Science and Engineering A, Volume:316, Number:1–2, pp:46–51.
• 14. Manicone, P. F., Rossi Iommetti, P. and Raffaelli, L., (2007). An overview of zirconia ceramics: Basic properties and clinical applications. Journal of Dentistry, Volume:35, Number:11, pp:819–826.
• 15. Piconi, C. and Maccauro, G., (1999). Zirconia as a ceramic biomaterial. Biomaterials, Volume:20, Number:1, pp:1–25.
• 16. Vigolo, P., Fonzi, F., Majzoub, Z. and Cordioli, G., (2005). An in vitro evaluation of ZiReal abutments with hexagonal connection : in original state and following abutment preparation. The International Journal of Oral & Maxillofacial Implants, Volume:20, Number:1, pp:108–114.
• 17. Shojaee, P. and Afshar, A., (2015). Effects of zirconia content on characteristics and corrosion behavior of hydroxyapatite/ZrO2 biocomposite coatings codeposited by electrodeposition. Surface and Coatings Technology, Volume:262, Number:3, pp:166–172.
• 18. Balamurugan, A., Balossier, G., Kannan, S., Michel, J., Faure, J. and Rajeswari, S., (2007). Electrochemical and structural characterisation of zirconia reinforced hydroxyapatite bioceramic sol–gel coatings on surgical grade 316L SS for biomedical applications. Ceramics International, Volume:33, Number:4, pp:605–614.
• 19. Salehi, S. and Fathi, M. H., (2010). Preparation of sol-gel derived HydroxyapatitelYttria stabilized zirconia nanocomposite coatings on 316 L stainless steel. In Proceedings of the 17th Iranian Conference of Biomedical Engineering, pp: 3–4.
• 20. Salehi, S. and Fathi, M. H., (2010). Fabrication and characterization of sol-gel derived hydroxyapatite/zirconia composite nanopowders with various yttria contents. Ceramics International, Volume:36, Number:5, pp:1659–1667.
• 21. Salehi, S. and Fathi, M. H., (2011). Elaboration of Sol-Gel Derived Hydroxyapatite / Yttria Stabilized Zirconia Composite Coatings Obtained for Biomedical Application. Defect and Diffusion Forum, Volume:312–315, pp:894–899.
• 22. Family, R., Solati-Hashjin, M., Nik, S. N. and Nemati, A., (2012). Protection of titanium metal by nanohydroxyapatite coating with zirconia and alumina second phases. Protection of Metals and Physical Chemistry of Surfaces, Volume:48, Number:6, pp:688–691.
• 23. Galvele, J.R. and Duffo, G. S., (1997). Calculation of the Surface Self-Diffusion Coefficient, Ds, Induced by the Exchange Current Density, Io. Application to Stress Corrosion Cracking. Corrosion Science, Volume:39, Number:3, pp:605–608.
• 24. Büyüksağiş, A., (2010). The Coating of Hydroxyapatite ( HAP ) on 316L Stainless Steel and Ti6Al4V Alloy use by Sol-Gel Method. Electronic Journal of Machine Technologies, Volume:7, Number:1, pp:1–11.