BİYOMEDİKAL UYGULAMALAR İÇİN MAGNEZYUM-KALSİYUM (MG-0.8CA) ALAŞIMININ DALMA ELEKTRO EROZYON İLE İŞLENMESİ

Ancak, tüm bu sonuçlara ek olarak Mg-Ca alaşımlarının geleneksel/alışılmış imalat yöntemleri işlenebilirlik edilmiştir. Tomac ve Tonnessen [5] bir magnezyum alaşımı (Mg-Al-Zn) için tornalama işleminde kesici takım yan kenarında meydana gelen yığıntı talaş oluşumunu Araştırmacıların bulguları aşağıdadır

Anahtar Kelimeler:

Özet: Bu deneysel çalışma, alışılmamış bir malzeme olan Dalma erozyon ile işleme, magnezyum-kalsiyum (Mg-0.8Ca) alaşımının dalma elektro

DIE-SINKING ELECTRICAL DISCHARGE MACHINING OF MAGNESİUM-CALCİUM (MG-0.8CA) ALLOY FOR BIOMEDICAL APPLICATIONS

This experimental study explores the effect of working current and pulse time on the performance of magnesium-calcium (Mg-0.8Ca) alloy, an unusual material, in die-sinking electrical discharge machining (EDM). The EDM performance was investigated by results of material removal rate (MRR), electrode wear ratio (EWR), electrode shape deformation and average surface roughness (Ra). Statistical methods, analysis of variance (ANOVA) and regression analysis were used for analytical explanation of the experimental results. It has been found that superior MRR and EWR results can be obtained in machining of magnesium-calcium alloys by EDM. However, surface roughness results of the alloy are not preferable after EDM

Keywords:

Die-sinking Electrical Discharge Machining, MagnesiumCalciumAlloy, biomedical,

PDF

___

Staiger, M.P.,Pietak, A.M., Huadmai, J. ve Dias, G. 2006. Magnesium and its alloys as orthopedic biomaterials: A review, Biomaterials, Cilt 27, No 9, s. 1734. DOI:10.1016/j.biomaterials.2005.10.00 Denkena, B.,Lucas, A. 2007.
Biocompatible Magnesium Alloys as Absorbable Implant Materials-Adjusted Surface and Subsurface Properties by Machining Processes, Annals of the CIRP, Cilt 56, No 1, s. 113-116. DOI:10.1016/j.cirp.2007.05.029
Song, G.L., Song, S.Z. 2007. A possible biodegradable material,
Materials, Cilt 9, No 4, s. 298- DOI: 10.1002/adem.200600252
You, B.S., Park, W.W., Chung, I.S. The Effect of Calcium Additions on Magnesium Alloys, Scripta Materialia, Cilt DOI:10.1016/S1359-6462(00)00344-4 1094. Tomac, N.,Tonnessen, K. 1991.
Formation of Build-up in Cutting Magnesium Alloys, Annals of the CIRP, Cilt DOI:10.1016/S0007-8506(07)61938-6 s. 82.
Guo, Y.B., Salahshoor, M. 2010.
Process mechanics and surface integrity by biodegradable implant Manufacturing Technology, Cilt 59, No 1, s. 1016/j.cirp.2010.03.051 of alloys, CIRP Annals- 154.DOI:
Wan, Y., Xiong, G., Luo, H., He, F., Huang, Y., Zhou, X. 2008. Preparation and characterization of a biomedical magnesium-calcium alloy.
Materials and Design, Cilt 29, s. 2034- 1016/j.matdes.2008.04.017 new DOI:
Rajurkar, K.P. 1994. Nontraditional
Manufacturing Processes. Handbook of Design, Manufacturing and Automation, Cilt 13, John Wiley&Sons, Inc., 211-212s. Guo, Y.B., Brooks, V.S., Todd, B.A. Characterization of Mechanical Property Biomedical Proceedings Materials&Process for medical Devices Conference, Minneapolis, Minnesota of of of the st Sundaram, M.M.,Rajurkar, K. P. Towards Free form Machining by Micro Electro Discharge Machining Process, Transactions of the North American Institution of SME (NAMRI/SME), Cilt , s. 381-388. Research Luo, Y.F. 1998. An investigation into the actual EDM off-time in SEA machining,
Processing Technology, Cilt 74, No 1-3, s. (97)00250-1 of Materials DOI: 1016/S0924