Parametrik denklemleri kullanarak karmaşık üçlü sarmal halat modeli oluşturmak için genel bir şema

Tel halatlarla ilgili yapılan Sonlu Eleman Analiz çalışmaları araştırmacılar arasında son on yılda büyük ilgi uyandırmıştır. Analiz çalışmaları sırasında doğru üç boyutlu tel halat modelleri ihtiyacı en önemli gerekliliktir. Böyle yüzey hatalarından arındırılmış bazı helisel şekillerin bir katı modelini oluşturmayı başarmak çoğunlukla çok zor hatta bazı zamanlar imkansız olmaktadır. Makalenin amacı bu tür karmaşık bir tel halat modelinin oluşturulmasını göstermeye çalışmaktır. Bu amaçla tekli, ikili ve üçlü tel halat modellerine ait parametrik matematik denklemler gösterilmiştir. Önerilen üçlü helisel halat modeli tasarımı hazır üç boyutlu tasarım uygulamaları kullanılmadan, özgün olarak geliştirilmiş bir kod yardımıyla oluşturulmaktadır. Tasarlanan model herhangi bir analiz aracına uyumlu hale getirilerek sayısal çözümler elde edilebilir.

Anahtar Kelimeler:

Tek helisel, çift helisel, üçlü helisel, tel halat modeli, helisel yapı modeli, karmaşık helisel modelleme

A general scheme to create complex triple helical wire rope model using parametric equations

Finite Element Analysis of wire ropes made big influence on researchers last decade. Requirement of an correct 3D wire rope model is the most important issue during analysis. To accomplish such a good model with error free surface representation for helical wires are mostly very difficult even sometimes impossible for some kind of helical shapes. This paper aims to show how to construct such an complicated wire rope model. For this purpose parametric mathematical equations of the single, double and triple wire models are represented. Proposed triple helical wire rope model is constructed by using a code instead of ready use commercial 3D software for material design. The constructed model can be adopted to any analysis tool to find numerical results.

Keywords:

Single helical, double helical, triple helical, wire rope model, helical geometry modeling, complex helical modeling,

PDF

___

[1] Love AEH (1944) A treatise on the mathematical theory of elasticity, 4th ed., New York: Dover Publ., First Am. Print. 1944, Chapter XVIII-XIX, 381-426.
[2] Timoshenko S (1955) Strength of materials, New York: Van Nostrand, 2:292-299.
[3] Green AE, Laws N (1966) A general theory of rods. Proc. R. Soc. Lond., Ser. A, Math. Phys. Sci., 293:(1433):145-155.
[4] Costello, G.A. and Sinha S.K. Static Behaviour of Wire Rope, Proceedings ASCE, Journal of Engineering Mechanical Division, 103 (No.EM6), 1011-1022, 1977
[5] Costello, G.A. and Miller, R.E. Lay Effect of Wire Rope, Journal of Engineering Mechanical Division, 105 (No.EM4 paper 14753), 597-608, 1979
[6] Costello, G.A. and Butson, G.J. A simplified bending theory for wire rope, Journal of the Engineering Mechanical Division, ASCE, 108, (EM2, Proc. Paper 16984), 219-227, 1982
[7] Costello, G.A. and Miller, R.E. Static response of reduced rotation rope, Journal of Engineering Mechanical Division, 106 (No.EM4 paper 15612), 623-631, 1980
[8] Costello GA (1990) Theory of wire rope, Berl.: Springer.
[9] Cochran JE Jr, Fitz-Coy NG, Cutchins MA (1987) Finite element models of wire rope for vibration analysis. NASA Marshall Space Flight Cent., NTRS: 2007-06-26, Number: 87N22748; ID: 19870013315.
[10] Chiang YJ (1996) Characterizing simple stranded wire cables under axial loading. Finite Elem. Anal. Des., 24:49-66.
[11] Andorfer K (1983) Die Zugkraftverteilung in schwingend beanspruchten geraden Drahtseilen, Diss. Tech. Univ. Graz.
[12] Lee WK (1991) An insight into wire rope geometry. Int. J. Solids Struct., 28:(4):471-490.
[13] Wang RC, Miscoe AJ, McKewan WM (1998) Model for the Structure of Round-Strand Wire Ropes. U.S. Dep. Health Hum. Serv., Public Health Serv., Cent. Disease Control Prev., Natl. Inst. Occup. Saf. Health, DHHS (NIOSH), Publ. No. 98-148, Rep. Investig. 9644:1-19
[14] Erdönmez, C., İmrak, C. E. (2011) A finite element model for independent wire rope core with double helical geometry subjected to axial loads, Sadhana,36(6), pp. 995-1008.
[15] Onur, Y.A. (2016) Experimental and theoretical investigation of prestressing steel strand subjected to tensile load, International Journal of Mechanical Sciences, Vol. 118, pp. 91-100.
[16] Onur, Y.A., İmrak, C.E., Onur, T.Ö. (2017) Investigation on bending over sheave fatigue life determination of rotation resistant steel wire rope, Experimental Techniques, 41(5), pp. 475-482.
[17] Onur, Y.A., İmrak, C.E. (2017) Discard fatigue life of stranded steel wire rope subjected to bending over sheave fatigue, Mechanics & Industry, 18 (2), 223.
[18] Stanova, E., Fedorko, G., Fabian, M., Kmet, S., Computer modelling of wire strands and ropes Part I: Theory and computer implementation, Advances in Engineering Software, 42(6):305–315.
[19] Stanova, E., Fedorko, G., Fabian, M., Kmet, S., Computer modelling of wire strands and ropes part II: Finite element-based applications, Advances in Engineering Software, 42(6):322-331.