___

• Abdollahi, A., Alizadeh, A., Baharvandi H. R., (2014). Dry sliding tribological behavior and mechanical properties of Al2024–5 wt. %B4C nanocomposite produced by mechanical milling and hot extrusion, Materials and Design, 55, 471-481.
• Abdullahi, K., Al-Aqeeli, N., (2014). Mechanical Alloying and Spark Plasma Sintering of Nano-SiC Reinforced Al–12Si–0.3Mg, Arabian Journal for Science and Engineering. 39, 3161-3168.
• Ahamed, H., Senthilkumar, V., (2010). Role of nano-size reinforcement and milling on the synthesis of nano-crystalline aluminium alloy composites by mechanical alloying. Journal of Alloys and Compounds, 505, 772–782.
• Ahamed, H., Senthilkumar, V., (2010). Role of nano-size reinforcement and milling on the synthesis of nano-crystalline aluminium alloy composites by mechanical alloying. Journal of Alloys and Compounds, 505, 772–782.
• Alizadeh, M., Aliabadi, M. M., (2011). Synthesis behavior of nanocrystalline Al–Al2O3 composite during low time mechanical milling process, Journal of Alloys and Compounds, 509, 4978-4986.
• Babu J.S.S., Nair K.P., Kang C.G., (2007). Fabrication and characterization of aluminum based nano-micro hybrid metal matrix composites, 16th International Conference on Composite Materials, Kyoto/Japan.
• Bhatta, J., Balachandera, N., Shekhera, S., Karthikeyan, R., Peshwea D.R., Murty, B.S., (2012). Synthesis of nanostructured Al–Mg–SiO2 metal matrix composites using high-energy ball milling and spark plasma sintering, Journal of Alloys and Compounds, 536, S35-S40.
• Casati, R., Fiocchi, J., Fabrizi, A., Lecis, N., Bonollo, F., Vedani, M., (2017). Effect of ball milling on the ageing response of Al2618 composites reinforced with SiC and oxide nanoparticles, Journal of Alloys and Compounds, 693, 909–920.
• Chen, C.-L., Thomson, (2010). R.C., The combined use of EBSD and EDX analyses for the identification of complex intermetallic phases in multicomponent Al–Si piston alloys. Journal of Alloys and Compounds, 490, 293–300.
• Chen, Y., Chen, T., Zhang , S., Li, P., (2015). Effect of ball milling on microstructural evolution during partial remelting of 6061 aluminum alloy prepared by cold-pressing of alloy powders, Transactions of Nonferrous Metals Society of China, 25, 2113-2121.
• Gusaiwal, H. K., (2009). Synthesis of Al-Si-Ni nanostrustured materials by mechanical alloying, Tez, Department of Metallurgical & Materials Engineering National Institute of Technology, Rourkela.
• German, R., (1994). Powder Metallurgy. Metal Powder Industries Federation, New Jersey, 472 s.
• Kubota, M., Cizek, P., Rainforth, W.M., (2008). Properties of mechanically milled and spark plasma sintered Al–15 at % MgB2 composite materials. Composites Science and Technology, 68, 888–895.
• Muhammad W.N.A.W., Sajuri Z., Mutoh Y., Miyashita Y., (2011). Microstructure and mechanical properties of magnesium composites prepared by spark plasma sintering technology, Journal of Alloys and Compounds, 509, 6021–6029.
• Nayak. S., and Karthik, A., (2011). Synthesıs of al-si alloys and study of theır mechanıcal propertıes. a thesıs, India.
• Oehring, M., Klassen, T., Bormann, R., (1993). The formation of metastable Ti–Al solid solutions by mechanical alloying and ball milling, Journal of Materials Research, 8, 2819-2829.
• Scudino, S., Sakaliyska, Surreddi, M. K.B., Eckert J., (2009), Mechanical alloying and milling of Al–Mg alloys. Journal of Alloys and Compounds, 483, 2–7.
• Sharifi, E.M., Karimzadeh, F., (2011). Wear behavior of aluminum matrix hybrid nanocomposites fabricated by powder metallurgy, Wear, 271, 1072-1079.
• Sugamata, M., Shiina, K., Kubota, M., Kaneko, J., (2009). Properties of mechanically alloyed P/M composites of Al–Mg2Si–oxide systems, Journal of Alloys and Compounds, 483, 350–354.
• Suryanarayana, C., Nasser, A. A., (2013). Mechanically Alloyed Nanocomposites, Progress in Materials Science, 58, 383–502.
• Suryanarayana, C., (2001). Mechanical alloying and milling, Progress in Materials Science, 46, 1-184.
• Vadeqani, M., Razavi, R.S., Barekat, M., Borhani, G.H., Mishra, A.K., (2017). Preparation of yttria nanopowders for use in transparent ceramics by dry ball-milling technique, Journal of the European Ceramic Society, 37, 2169–2177.
• Woo, K.D., Zhang, D.L., (2004). Fabrication of Al–7wt%Si–0.4wt%Mg/SiC nanocomposite powders and bulk nanocomposites by high energy ball milling and powder metallurgy, Current Applied Physics, 4, 175-178.
• Wang, K.Y., He, A.Q., Shen, T.D., Quan, M.X., Wang, J.T., (1994). Synthesis of Al-based metastable alloys by mechanical milling Al and amorphous Fe78Si12B10 powders, Journal of Materials Research, 9, 866-874.
• Yu, J.H., Wang, C.B., Shen, Q., Zhang, L.M., (2012). Preparation and Properties of SipAl Composites by Spark Plasma Sintering, Materials and Design, 41, 198–202.
• Zhao, X.J., Xiao, L.R., Zhao, Z.W., Guo, L., Ru, H.Q., Zhang, N., Chen, D.L., (2014). Fabrication and mechanical properties of silicon carbide–aluminum oxynitride nanocomposites, Ceramics International, 40, 14295–14303.
• Zheng, H., Cheng, S., Shu, X., Li, G., (2017). Effect of ball milling treatment on the microstructure and microhardness of Nb-25Cr alloy, International Journal of Refractory Metals and Hard Materials, 66, 57–62.