Abdulkadir ÖZŞAHİN, Meltem DARTAR ÖZTAN, Emine ODABAŞI TEZER

FARKLI YAPISAL ÖZELLİKTEKİ NİKEL-TİTANYUM KÖK KANAL EĞELERİNİN SODYUM HİPOKLORİT VE SERUM FİZYOLOJİK ÇÖZELTİLERİNDEKİ DÖNGÜSEL YORGUNLUK DİRENÇLERİNİN KARŞILAŞTİRİLMASI

Amaç: Bu çalışmanın amacı; 3 farklı yapısal özellikteki nikel-titanyum (Ni-Tialetin döngüsel yorgunluk dirençlerini serum fizyolojik ve sodyum hipoklorit (NaOCl) çözeltileri kullanarak karşılaştırmaktır. Gereç ve Yöntem: Çalışmada 6 deney grubu (n=15) oluşturuldu ve toplamda 90 adet eğe kullanıldı. Grup 1: Protaper Universal (Dentsply Maillefer, Ballaigues, İsviçre), serum fizyolojik; Grup 2: Dia PT file (Dia-Dent, Cheongwon, Korea), serum fizyolojik; Grup 3: Dia X file (Dia-Dent, Cheongwon, Korea), serum fizyolojik; Grup 4: Protaper Universal, %5 NaOCl; Grup 5: Dia PT file %5 NaOCl; Grup 6: Dia X file, %5 NaOCl. Döngüsel yorgunluk testleri 60o eğim 5 mm eğim yarıçapına sahip yapay kanal içeren deney düzeneğinin haznesine solüsyonlar yerleştirilerek yapıldı. Eğelerin kırılıncaya kadar geçen süre ve kırılan parça uzunluğu kaydedildi. Bulgular: Her iki solüsyonda Dia X eğeleri, Dia PT ve Protaper Universal eğeleri ile karşılaştırıldığında döngüsel yorgunluğa istatistiksel olarak anlamlı derecede daha dirençli bulundu. Tüm eğelerin serum fizyolojik solüsyonundaki döngüsel yorgunluk direnci, sodyum hipoklorit ile kıyaslandığında istatistiksel olarak anlamlı derecede yüksek bulundu. Sonuç: Her iki solüsyonda da Dia X file döner eğe sistemi Protaper Universal ve Dia PT gruplarıyla karşılaştırıldığında döngüsel yorgunluğa daha dirençli bulunmuştur. Anahtar Kelimeler: Dia PT file, Dia X file, Döngüsel yorgunluk, Protaper Universal, Sodyum Hipoklorit. Cyclic Fatigue Resistance of Nickel-Titanium Root Canal Instruments Manufactured with Various Methods in Sodium Hypochlorite and Saline Abstract Aim: The aim of this study was to compare the cyclic fatigue resistance of ProTaper Universal, Dia PT file and Dia X file which are produced with different machining procedures using saline and sodium hypochlorite solution. Materials and Methods: The study included six experimental groups (n = 15) and a total of 90 files. Group 1: Protaper Universal, saline; Group 2: Dia PT file, saline; Group 3: Dia X file, saline; Group 4: Protaper Universal, 5% NaOCl; Group 5: Dia PT file 5% NaOCl; Group 6: Dia X file, 5% NaOCl. The files were rotated in an artificial stainless steel canal with 5 mm radius, 60° angle of curvature and the instruments were dynamically immersed in either 5% sodium hypochlorite (NaOCl) or saline. The time to failure of files was recorded with a digital chronometer and fracture length was measured. Results: In both solutions Dia X files were significantly more resistant to cyclic fatigue compared to Dia PT and Protaper Universal files. The cyclic fatigue resistance of all files in the saline solution was significantly higher compared to sodium hypochlorite. Conclusion: In both solutions Dia X files were significantly more resistant to cyclic fatigue compared to Dia PT and Protaper Universal files. Keywords: Cyclic fatigue, Dia PT file, Dia X file, Protaper Universal, Sodium hypochlorite.

Anahtar Kelimeler:

Dia PT file, Dia X file, Döngüsel yorgunluk, Protaper Universal

PDF

___

1. Adigüzel M, Tüfenkçi P .Waveone, Reciproc ve Twisted file adaptive döner sistem eğelerin çift kurvatürlü (s şekilli) kanallarda döngüsel yorulma dirençlerinin karşılaştırılması. J Dent Fac Atatürk Uni 2018; 28(2):199-203.
2. Ametrano G, Anto VD, Di Caprio MP, Simeone M, Rengo S, Spagnuolo G. Effects of sodium hypochlorite and ethylenediaminetetraacetic acid on rotary nickel-titanium instruments evaluated using atomic force microscopy. Int Endod J 2011; 44: 203–209.
3. Anderson ME, Price JWH, Parashos P. Fracture Resistance of Electropolished Rotary Nickel–Titanium Endodontic Instruments. J Endod 2007; 33: 1212–1216.
4. Bonaccorso A, Tripi TR, Rondelli G, Condorelli GG, Cantatoreg, Schafer E . Pitting corrosion resistance of nickel titanium rotary instruments with different surface treatments in seventeen percent ethylenediaminetetraacetic acid and sodium chloride solutions. J Endod 2008; 34: 208–11.
5. Brantley WA, Svec TA, Iijima M, Powers JM, Grentzer TH. Differential scanning calorimetric studies of nickel titanium rotary endodontic instruments. J Endod 2002; 28: 567–72.
6. Bui TB, Mitchell JC, Baumgartner JC. Effect of electropolishing ProFile nickel-titanium rotary instruments on cyclic fatigue resistance, torsional resistance, and cutting efficiency. J Endod 2008; 34: 190–3.
7. Cai J-J, Ge J-Y, Tang X-N. Effect of irrigation on surface roughness and fatigue resistance of controlled memory wire nickel-titanium instruments. Int Endod J 2017; 50:718-724.
8. Cheung G, Zhang E, Zheng Y. A numerical method for predicting the bending fatigue life. Int Endod J 2011; 44(4): 357-61.
9. Cheung GS, Shen Y, Darvell BW . Does electropolishing improve the low-cycle fatigue behavior of a nickel-titanium rotary instrument in hypochlorite? J Endod 2007; 33: 1217–21.
10. Condorelli GG, Bonaccorso A, Smecca E, Schafer E, Cantatore G, Tripi TR.Improvement of the fatigue resistance of NiTi endodontic files by surface and bulk modifications. Int Endod J 2010; 43: 866–73.
11. De-Deus G, Silva EJ, Vieira VT. Blue thermomechanical treatment optimizes fatigue resistance and flexibility of the Reciproc files. J Endod 2017; 43: 462–6.
12. Duke F, Shen Y, Zhou H . Cyclic Fatigue of Pro-File Vortex and Vortex Blue nickel-titanium files in single and double curvatures. J Endod 2015; 41: 1686–90.
13. Elnaghy AM, Elsaka SE. Mechanical properties of ProTaper Gold nickel-titanium rotary instruments. Int Endod J 2016; 49: 1073–8.
14. Erik CE, Özyürek T. Effects of etidronate, NaOCl, EDTA irrigation solutions and their combinations on cyclic fatigue resistance of nickel-titanium single-file rotary and reciprocating instruments at body temperature. Odontology 2019; 107(2):190-195.
15. Gao Y, Gutmann JL, Wilkinson K, Maxwell R, Ammon D. Evaluation of the impact of raw materials on the fatigue and mechanical properties of ProFile Vortex rotary instruments. J Endod 2012; 38: 398–401.
16. Grande NM, Plotino G, Silla E, Pedull E, DeDeus G, Gambarini G, Somma F. Environmental Temperature Drastically Affects Flexural Fatigue Resistance of Nickel-titanium Rotary Files. J Endod 2017; 43(7):1157-1160.
17. Hülsmann M, Peters OA, Dummer PMH .Mechanical preparation of root canals. Shaping goals, techniques and means. End Topics 2005; 10: 30-76.
18. Hülsmann M, Donnermeyer D, Schafer E. A critical appraisal of studies on cyclic fatigue resistance of engine driven endodontic instruments. Int Endod J, 2019; 52, 1427–1445.
19. Johnson E, Lloyd A, Kuttler S, Namerow K . Comparison between a novel nickel-titanium alloy and 508 nitinol on the cyclic fatigue life of ProFile 25/.04 rotary instruments. J Endod 2008; 34: 1406–9.
20. Kum KY, Spangberg L, Cha BY, IL-Young J MSD, Seung- Jong L, CHAN-Young L. Shaping ability of three ProFile rotary instrumentation techniques in simulated resin root canals. J Endod 2000; 26: 719-723.
21. Kwak SW, Lee JY, Goo HJ, Kim HC. Effect of surface treatment on the mechanical properties of nickel-titanium files with a similar cross-section. Restor Dent Endod 2017; 42(3): 216-223.
22. Larsen CM, Watanabe I, Glickman GN, He J.Cyclic fatigue analysis of a new generation of nickel titanium rotary instruments. J Endod 2009; 35: 401-3.
23. Lopes HP, Elias CN, Vieira MV, Vieira VT, De Souza LC, Dos Santos AL. Influence of surface roughness on the fatigue life of nickel-titanium rotary endodontic instruments. J Endod 2016; 42: 965–8.
24. Lopes HP, Elias CN, Vieira VT. Effects of electropolishing surface treatment on the cyclic fatigue resistance of BioRace nickel-titanium rotary instruments. J Endod 2010; 36: 1653–7.
25. Nguyen HH, Fong H, Paranjpe A, Flake NM, Johnson JD, Peters OA. Evaluation of the resistance to cyclic fatigue among ProTaper Next, ProTaper Universal, and Vortex Blue rotary instruments. J Endod 2014; 40: 1190–3.
26. O’hoy PYZ, Messer HH, Palamara JEA. The effect of cleaning procedures on fracture proporties and corrosion of Ni-Ti files. Int Endod J 2003; 36: 724-732.
27. Oshida Y, Sachdeva RC, Miyazaku S. Microanalytical characterization and surface modification of TiNi orthodontic archwires. Biomed Mater Eng 1992; 2: 51–69.
28. Pereira ES, Peixoto IF, Viana AC (). Physical and mechanical properties of a thermomechanically treated NiTi wire used in the manufacture of rotary endodontic instruments. Int Endod J 2012;45: 469– 74.
29. Peters OA. Current challenges and concepts in the preparation of root canal systems: a review. J Endod 2004; 30: 559-67.
30. Plotino G, Grande NM, Mercade M, Testarelli L, Gambarini G. Influence of Temperature on Cyclic Fatigue Resistance of ProTaper Gold and ProTaper Universal Rotary Files. J Endod 2017; 43(2): 200-202.
31. Pruett JP, Clement DJ, Carnes DL. Cyclic fatigue of nickel-titanium endodontic systems. J Endod 1997; 23: 77-85.
32. Sattapan B, Nervo G, PALAMARA J, Messer H. Defects in nickel titanium endodontic rotary files after clinical usage. J Endod 2000; 26: 161-165.
33. Schafer E, Schulz-Bongert U, Tulus G. Comparison of hand stainless steel and nickel titanium rotary instrumentation: a clinical study. J Endod 2004; 30: 432-435.
34. Shen Y, Huang X, Wang Z, Wei X, Haapasalo M. Low Environmental Temperature Influences the Fatigue Resistance of Nickel-titanium Files. J Endod 2018; 44: 626-629.
35. Spencer HR, Ike V, Brennan PA .Review: the use of sodium hypochlorite in endodontics-potential complications and their management. Br Dent J 2007; 202: 555-9.
36. Thompson SA. An overview of nickel-titanium alloys used in dentistry. Int Endod J 2000; 33: 297– 310.
37. Topçuoğlu HS, Topçuoğlu G. Cyclic fatigue resistance of Reciproc Blue and Reciproc files in an S-shaped canal. J Endod 2017; 43: 1679–82.
38. Uslu G, Özyürek T, Yilmaz K . Effect of Sodium Hypochlorite and EDTA on Surface Roughness of HyFlex CM and HyFlex EDM Files. Microsc Res Tech 2018; 81 : 1406-1411.
39. Vasconcelos RA, Murphy S, Carvalho CAT, Govindjee RG, Govindjee S, Peters OA. Evidence for Reduced Fatigue Resistance of Contemporary Rotary Instruments Exposed to Body Temperature. J Endod 2016; 42(5): 782-7.
40. Viana AC, Craveiro C, De Melo M, De Azevedo G, Bahia M, Lopes Buono VT. Relationship between flexibility and physical, chemical, and geometric characteristics of rotary nickel-titanium instruments. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2010; 110: 527–33.
41. Yao JH, Schwartz SA, Beeson TJ. Cyclic fatigue of three types of rotary nickel-titanium files in a dynamic model. J Endod 2006; 32(1): 55-7.
42. Zhou HM, Shen Y, Zheng W, Li L, Zheng YF, Haapasalo M .Mechanical properties of controlled memory and superelastic nickel-titanium wires used in the manufacture of rotary endodontic instruments. J Endod 2012; 38: 1535–40.