Optimization of a new microbolometer IR detector in standard CMOS technology

Abstract. This paper reports a new microbolometer structure with the CMOS n-well layer as the active element and the metal layer as intermediate layer on supporting arms. Due to thermal flux into the microbolometer, thermal variation occurs within it that leads to the variation of resistivity. The more thermal variation, the more microbolometer performance. Various materials have been used for fabrication of bolometers that one could outperforms the performance of bolometers by selecting an appropriate materials for active and intermediate layers on supporting arm. Detailed thermal simulations in ANSYS were performed to obtain an optimized structure. Maximum specific detectivity has been calculated 1334×109 cmHz1/2/W with a responsivity of 32721 V/W.

___

  • Gordley. Lany,” A Space Instrument Application Of An Uncooled Infrared Microbolometer Array”, IEEE,GATS Inc., Newport News, VA 23606,8, 2 000. Niklaus. Frank
  • ،٬" MEMS-Based Uncooled Infrared Bolometer Arrays – A Review", MEMS/MOEMS Technologies and Applications III, SPIE VOL 6836, 68360D,15,2007.
  • Song. Woo-Bin,” Design and characterization of adaptive Microbolometers” Micromech. Microeng. 16 IOP Publishing Ltd Printed in the UK 1073- 1079,7,2006.
  • Tezcan. Deniz Sabuncuoglu ،٬" An Uncooled Microbolometer Infrader Detector in any standard Cmos technology ", The 10th Int. Conf. on Solid-State Sensors&Actuators (TRANSDUCERS’99), pp. 610-613, 4 ،٬ Sendai, Japan, June 7-10, 1999.
  • Tezcan. Deniz Sabuncuoglu ،٬" A Low-Cost Uncooled Infrared Microbolometer Detector in Standard CMOS Technology”،٬ IEEE Transactions on electron devices, VOL. 50, NO. 2,9, FEBRUARY 2003.
  • Wang. Li-Xia،٬”Preparation of VO2 Microbolometer for CO2 gas Detection”, IEEE,College of Science, Nanjing University of Posts and Telecommunications, Nanjing, China, 210046,4, 2010.