Karbon Nanopartiküllerin Epoksi Yapıştırıcılarda Etkilerinin İncelenmesi
Günümüzde aynı veya farklı türlerdeki malzemelerin birleştirilmesi için kolay uygulanabilme ve ekonomik olmaları nedeniyle yapıştırıcılar oldukça fazla kullanılmaktadır. Gelişen teknoloji ve üretim yöntemleriyle beraber hemen hemen her alan için ihtiyaç duyulan yapıştırıcılar üretilmektedir. Yapıştırıcıların özelliklerinin iyileştirilmesi için çalışmalar yapılmaktadır. Çalışmada, epoksi yapıştırıcıların içerisine karbon nanopartikül eklenerek oluşturulan yapıştırma bağlantılarında nanopartikül oranının pürüzlü yüzeylerdeki yapışma dayanımına etkileri araştırılmıştır. Yapıştırıcılara, yapıştırıcı ağırlığının %0,5 ile %5’i aralığındaki oranlarda nanopartiküller eklenerek deneyler yapılmıştır. Nanopartiküllerin belirli bir orana kadar yapışma dayanımına olumlu etki gösterdiği sonrasında ise bu etkilerinin azaldığı görülmüştür
Investigation of Effects of Carbon Nanoparticles on Epoxy Adhesives
Nowadays, adhesives are widely used because they are easy to apply and economical for joining the same or different types of materials. With the developing technology and production methods, adhesives needed for almost every field are produced. Efforts are being made to improve the properties of adhesives. In this study, effects of nanoparticle ratio on adhesion strength on rough surfaces were investigated in bonding joints formed by adding carbon nanoparticle into epoxy adhesives. Experiments were carried out by adding nanoparticles in the range of 0.5% to 5% of the adhesive weight. Nanoparticles showed a positive effect on adhesion strength up to a certain rate, and after that, these effects decreased.
___
- Aydın, S., 2012. Yapıştırıcı ile Birleştirilmiş
Prizmatik Geçmeli Bağlantıların Mekanik
Analizleri, Doktora Tezi, Fen Bilimleri
Enstitüsü, Fırat Üniversitesi, Elazığ.
- Hsiao, K.T., Alms, J., Advani, S.G., 2003. Use
of Epoxy/multiwalled Carbon Nanotubes as
Adhesives to Join Graphite Fibre Reinforced
Polymer Composites. Nanotechnology 14,
791-793.
- Panta, J., Jagannatham, M., Prathap, H., Ram,
G.D.J., Deshpande, A.P., Bakshi, S.R., 2016.
Effect of Different Carbon Nano-fillers on
Rheological Properties and Lap Shear Strength
of Epoxy Adhesive Joints Composites A, 82,
53–64.
- Florian, G., Malte, W., Bodo, F., Schulte, K.,
2005. Influence of Different Carbon Nanotubes
on the Mechanical Properties of Epoxy Matrix Composites-A Comparative Study. Composites
Science and Technology. 65, 2300-2313.
10.1016/j.compscitech.2005.04.021.
- Saeed, M.B., Zhan, M.S., 2007. Adhesive
Strength of Nano-size Particles Filled
Thermoplastic Polyimides. Part-I: Multi-walled
Carbon
Nano-tubes
(MWNT)-polyimide
Composite Films, Int. J. Adhes. Adhes., 27,
306–318.
- Lanlan, Z., Guoping, L., Jian, L., Youwen, W.,
2006. The Effect of Nanoparticles on the
Adhesion of Epoxy Adhesive, Materials
Letters, 60, 3031–3033.
- Gültekin K., Akpinar S., Gürses A., Eroglu Z.,
Cam S., Akbulut, H., Keskin, Z., Özel, A.,
2016. The Effects of Graphene Nanostructure
Reinforcement on the Adhesive Method and
the Graphene Reinforcement Ratio on the
Failure Load in Adhesively Bonded Joints,
Composites Part B, 98, 362-369.
- Akpinar, İ.A., Gültekin K., Akpinar, S.,
Akbulut, H., Özel, A., 2017. Research on
Strength of Nanocomposite Adhesively
Bonded Composite Joints, Composites Part B,
126, 143-152.
- May, M., Wang, H.M., Akid, R., 2010. Effects
of the Addition of Inorganic Nanoparticles on
the Adhesive Strength of a Hybridsol-gel
Epoxy System, International Journal of
Adhesion & Adhesives, 30, 505–512.
- Wernik, J.M., Meguid, S.A., 2014. On the
Mechanical Characterization of Carbon
Nanotube Reinforced Epoxy Adhesives.
Materials & Design, 59(0), 19-32.
- Razavi, S.M.J., Ayatollahi, M.R., Nemati,
G.A., Khoramishad, H., 2018. Single Lap
Joints Bonded with Structural Adhesives
Reinforced with a Mixture of Silica
Nanoparticles and Multi Walled Carbon
Nanotubes, International Journal of Adhesion
and Adhesives, 80, 76–86.
- Douba, A., Genedy, M., Matteo, E.N., Kandil,
U.F., Stormont, J., Reda, T.M.M., 2017. The
Significance of Nanoparticles on Bond
Strength of Polymer Concrete to Steel,
International Journal of Adhesion &
Adhesives, 74, 77–85.
- Andrew, J., McNamara, Y.J., Zhuomin, M.Z.,
2015. Thermal Resistance of Thermal Conductive Adhesive Anchored Carbon
Nanotubes Interface Material, Int. J. Thermal
Sci., 96, 221-226.
- Suzhu, Y., Tong M.N., Critchlow, G., 2010.
Use Ofcarbon Nanotubes Reinforced Epoxy as
Adhesives to Join Aluminum Plates. Materials
and Design, 31, 126-129.
- Chena H., Jacobs O., Wua W., Rudiger G.
Schadel B., 2007. Effect of Dispersion Method
on Tribological Properties of Carbon Nanotube
Reinforced Epoxy Resin Composites. Polymer
Testing 26, 351–360.
- Aydın, S., Fertelli, A., 2018. Nanopartikül ve
Yüzey
Pürüzlülüğünün
Yapışma
Mukavemetine
Etkilerinin
İncelenmesi,
Academic
Perspective
Procedia,
1(1),
1164-1170.