CuZn40Pb2’nin Elektriksel İletkenliği Üzerine Aşırı Plastik Deformasyonun Etkisi
Bu çalışmada, CuZn40Pb2 pirinç malzemesi hem ticari nitelikte hem de eşit kanal açısal presleme (EKAP) işlem metodu ile tek pas kullanılarak aşırı plastik deformasyonu oluşturularak elektriksel özellik üzerine mikroyapı ve mekanik özelliklerin etkisi incelenmiştir. Özellikle Cu bazlı malzemelerin elektriksel ve korozyon özelliklerinin iyi olduğu bilinmesine karşın tane boyutlarında elde edilebilecek küçülmelerin mekanik ve fiziksel özelliklerini nasıl etkilemiş olabileceği çalışmanın temelini oluşturmaktadır. Bilindiği üzere ticari özelliklerde pirinç alaşımları endüstriyel anlamda gemi sanayiinde, otomotiv sanayiinde ve diğer birçok endüstriyel alanda uygulama içerinde kullanılmaktadırlar. Bu kapsamda yapılan çalışma ile EKAP tekniği kullanılarak CuZn40Pb2 malzemesi tane boyutları ufaltılmış, sertlik özelliklerinde %34 artış ve elektriksel özelliklerinde ise %3 azalma göstermiştir.
The Effect of Severe Plastic Deformation on the Electrical Conductivity of CuZn40Pb2
In this study, the effects of microstructure and mechanical properties on electrical properties of CuZn40Pb2 brass material were investigated by using both a commercial quality and an equal channel angular pressing (ECAP) process. Especially, although it is not known that the electrical and corrosion properties of Cu-based materials are good, it is the basis of studying how mechanical and physical properties of the size reductions may be affected. As is known, commercially available brass alloys are used industrially in the shipbuilding industry, the automotive industry and many other industrial applications. In this study, the grain size of CuZn40Pb2 material decreased and the hardness properties increased at 34% and electrical properties decreased at 3% with ECAP technique.
___
- 1. Kim, H.S., Kim, W.Y., Song, K.H., 2012.
Effect of Post-heat-treatment in ECAP
Prpcessed Cu-40%Zn Brass, Journal of Alloys
and Compounds, 536, 200-203.
- 2. Xia, Z., Szklarska-Smialowska, Z., 1990.
Pitting of Admiralty Brass, Corrosion, 46,
85-88.
- 3. Brooks, C.R., 1982. Heat Treatment, Structure
and Properties of Nonferrous Alloy, American
Society for Metals, Metals Park, Ohio,
139-142.
- 4. Straumal, P.B., Wegner, M., Shangina, D.V.,
Kogtenkova, O.A., Kilmametov, A., Divinski,
S.V., Dobatkin, S.V., Wilde, G., 2017.
Diffusion of 63Ni in Severely Deformed
Ultrafine Grained Cu-based Alloys, Scripta
Materialia, 127, 141-145.
- 5. Chinh, N.Q., Valiev, R.Z., Sauvage, X., Varga,
G., Havancsák, K., Kawasaki, M., Straumal,
B.B., Langdon, T.G., 2014. Grain Boundary
Phenomena in an Ultrafine-grained Al-Zn
Alloy with Improved Mechanical Behavior for
Micro-devices, Advanced Engineering
Materials, 16, 1000–1009.
- 6. Purcek, G., Yanar, H., Saray, O., Karaman, I.,
Maier, H.J., 2014. Effect of Precipitation on
Mechanical and Wear Properties of Ultrafinegrained
Cu-Cr-Zr Alloy, Wear 311, 149–158.
- 7. Islamgaliev, R.K., Nesterov, K.M., Bourgon,
J., Champion, Y., Valiev, R.Z., 2014.
Nanostructured Cu-Cr Alloy with High
Strength and Electrical Conductivity, Journal
of Applied Physics, 115, 194-301.
- 8. Xu, C.Z., Wang, Q.J., Zheng, M.S., Zhu, J.W.,
Li, J.D., Huang, M.Q., Jia, Q.M., Du, Z.Z.,
2007. Microstructure and Properties of Ultra-
Fine Grain Cu-Cr Alloy Prepared by Equalchannel
Angular Pressing, Materials Science
and Engineering A, 459, 303–308.
- 9. Shangina, D., Maksimenkova, Y., Bochvar, N.,
Serebryany, V.N., Raab, G., Vinogradov, A.,
Skrotzki, W., Dobatkin, S., 2014. Structure and
Properties of Cu Alloys Alloying with Cr
and Hf After Equal Channel Angular Pressing,
Advanced Materials Research, 922, 651–656.
- 10. Wang, Q.J., Xu, C.Z., Zheng, M.S., Zhu, J.W.,
Du, Z.Z., 2008. Fatigue Crack İnitiation life
Prediction of Ultra-fine Grain Chromium–
Bronze Prepared by Equal-channel Angular
Pressing, Materials Science and Engineering A,
496, 434–438.
- 11. Dobatkin, S.V., Shangina, D.V., Bochvar,
N.R., 2015. Aging Processes in Ultrafinegrained
Low-alloyed Bronzes Subjected to
Equal Channel Angular Pressing, Advanced
Engineering Materials, 17, 1862–1868.
- 12. Mishnev, R., Shakhova, I., Belyakov, A.,
Kaibyshev, R., 2015. Deformation
Microstructures, Strengthening Mechanisms,
and Electrical Conductivity in a Cu–Cr–Zr
alloy, Materials Science and Engineering A,
629, 29–40.
- 13. Shangina, D.V., Gubicza, J., Dodony, E.,
Bochvar, N.R., Straumal, P.B., Tabachkova,
N.Y., Dobatkin, S.V., 2014. Improvement of
Strength and Conductivity in Cu-alloys with
the Application of High Pressure Torsion and Subsequent Heat-treatments, Journal of
Materials Science, 49, 6674–6681.
- 14. Kaya, H., Ucar, M., 2016. The Effect of
Mechanical Properties on Fatigue Behavior of
Ecaped AA7075, High Temperature Materials
and Processes, 35(3), 225-234.
- 15. Horita, Z., Fujinami, T., Langdon, T.G., 2001.
The Potential for Scaling ECAP: Effect of
Sample Size on Grain Refinement and
Mechanical Properties, Materials Science and
Engineering A, 318, 34–41.
- 16. Kaya, H., Ucar, M., Cengiz, A., Samur, R.,
Ozyurek, D. Caliskan, A., 2014. Novel
Moulding Technigue for ECAP Process and
Effects on Hardness of AA7075, Mechanika,
20, 5–10.
- 17. Kim, W.J., Chung, C.S., Ma, D.S., Hong, S.I.,
Kim, H.K., 2003. Optimization of Strength and
Ductility of 2024 Al by Equal Channel Angular
Pressing (ECAP) and Post-ECAP Aging,
Scripta Materialia, 49, 333–338.
- 18. Segal, V.M., 1995. Materials Processing by
Simple Shear, Materials Science and
Engineering A, 197, 157–164.
- 19. Tolaminejad, B., Dehghani, K., 2012.
Microstructural Characterization and
Mechanical Properties of Nanostructured
AA1070 Aluminum After Equal Channel
Angular Extrusion, Journal of Materials and
Design, 34, 285–292.
20. Zhu, Y.T., Lowe, T.C., 2000. Observations and
Issues on Mechanisms of Grain Refinement
During ECAP Process, Materials Science and
Engineering A, 291, 46–53.
- 21. Das, P., Jayaganthan, R., Chowdhury, T.,
Singh, I.V., 2011. Fatigue Behaviour and
Crack Growth Rate of Cryorolled Al 7075
Alloy, Materials Science and Engineering A,
528, 7124–7132.
- 22. Ferrasse, S., Segal, S.M. 1997. Microstructure
and Properties of Copper and Aluminum Alloy
3003 Heavily Worked by Equal Channel
Angular Extrusion, Metal Materials
Transactions A, 28, 1047–1057.
- 23. Horita, Z., Fujinami, T., 2000. Equal-channel
Angular Pressing of Commercial Aluminum
Alloys: Grain Refinement, Thermal Stability
and Tensile Properties, Metall Materials
Transactions A, 31, 691–701.
- 24. Semiatin, S.L., Berbon, P.B., Langdon, T.G.,
2001. Deformation Heating and its Effect on
Grain Size Evolution During Equal Channel
Angular Extrusion, Scripta Materialia, 44,
135–140.
- 25. Nakashima, K., Horita, Z., Nemoto, M.,
Langdon, T.G., 2000. Development of a Multi-
Pass Facility for Equal-channel. Angular
Pressing to High Total Strains, Materials
Science and Engineering A, 281, 82–87.
- 26. Tong, L.B., Zheng, M.Y., Hu, X.S., Wu, K.,
Xu, S.W., Kamado, S., Kojima, Y., 2010.
Influence of ECAP Routes on Microstructure
and Mechanical Properties of Mg–Zn–Ca alloy,
Mater. Sci. Eng. A, 527, 4250–4256.
- 27. Kim, I., Kim, J., Shin, D.H., Lee, C.S., Hwang,
S.K., 2003. Effects of Equal Channel Angular
Pressing Temperature on Deformation
Structures of Pure Ti, Materials Science and
Engineering A, 342, 302–310.
- 28. Lapovok, R., Thomson, P.F., Cottam, R.,
Estrin, Y., 2005. Processing Routes Leading to
Superplastic Behaviour of Magnesium Alloy
ZK60, Materials Science and Engineering A,
410–411, 390–393.
- 29. Torre, F.D., Lapovok, R., Sandlin, J.,
Thomson, P.F., Davies, C.H.J., Pereloma, E.V.,
2004. Microstructures and Properties of Copper
Processed by Equal Channel Angular Extrusion
for 1–16 Passes, Acta Materialia, 52,
4819–4832.
- 30. Abbas, S.F., Seo, S., Park. K., Kim, B., 2017.
Effect of Grain Size on the Electrical
Conductivity of Copper-iron Alloys, Journal of
Alloys and Compounds, 720, 8–16.
- 31. Majchrowicz, K., Pakiela, Z., Chrominski, W.,
Kulczyk, M., 2018. Enhanced Strength and
Electrical Conductivity of Ultrafine-grained
Al-Mg-Si Alloy Processed by Hydrostatic
Extrusion, Materials Characterization, 135,
104–114.
- 32. Atapek, Ş.H., Klinski-Wetzel, K., Heilmaier,
M., 2012. Effect of Microstructure on the
Electrical Conductivity of Cast and Aged
CuNiSiCr Alloy, III. İleri Teknolojiler
Çalıştayı, Bildiriler Kitabı, 433-443.
- 33. Lipinska, M., Bazarnik, P., Lewandowska, M.,
2016. The Influence of Severe Plastic
Deformation Processes on Electrical
Conductivity of Commercially Pure
Aluminium and 5483 Aluminium Alloy,
Archives of Civil and Mechanical Engineering,
16, 717–723.