Metal Filament İçeren İpliklerden Üretilen Süprem Örme Kumaşların Farklı Doğrultulardaki Yüzey Özdirençlerinin İncelenmesi
Bu çalışmada bakır/çelik monofilament ve metalize gümüş multifilament içeren ipliklerden üretilen örme kumaşların farklı doğrultulardaki yüzey özdirenç değerleri incelenmiştir. Bu kapsamda iletken filamentler (metalize gümüş, bakır, paslanmaz çelik) eşkarıştırma (commingling) tekniği kullanılarak tekstüre polyester filament iplikler ile birleştirilmiştir. Üretilen metal içerikli ipliklerden süprem örgü yapısında numune kumaşlar üretilmiştir. Üretilen numune örme kumaşlara sıra ve çubuk doğrultusunda yüzey özdirenç testleri uygulanmıştır. Mikroskop görüntüleri kullanılarak iplik ve kumaş numunelerinin yüzey yapıları detaylı olarak incelenmiştir. Veriler istatistiksel teknikler ile analiz edilmiş ve sonuçlar karşılaştırmalı olarak değerlendirilmiştir. Araştırma sonuçları metal içerikli ipliklerden üretilen örme kumaşların daha düşük özdirenç değerine sahip olduğunu göstermiştir.
Investigation of Surface Resistivity in Different Directions of Single Jersey Knitted Fabrics Produced by Yarns Including Metal Filaments
In this study, surface resistivity of knitted fabrics produced by yarns including conductive copper/steel monofilament and metallized silver multifilament was investigated. In this context, conductive filaments are combined with textured polyester yarns by commingling technique. The produced yarns were knitted to single jersey. Surface resistivity tests were applied to the fabric samples in wale and course directions. Surface structures of the yarns and fabrics were examined in detail by taking microscope images. The obtained results were statistically analyzed and evaluated comparatively. As a conclusion, the knitted fabrics produced by yarns including metalized filaments have a lower surface resistivity than the standard and the metal monofilament fabric samples.
___
- 1. Başarır, İ.F., 2013. Elektronik İmalat
Aşamasında Güvenlik, Statik Elektriğe Karşı
Önlemler, TMMOB Elektrik Mühendisliği
Dergisi, 447, 42-44.
- 2. Asanovic, K.A., Mihajlidi, T.A., Milosavljevic,
S.V., Cerovic, D.D., Dojcilovic, J.R., 2007.
Investigation of the Electrical Behavior of
Some Textile Materials. Journal of
Electrostatics, 65(3), 162-167.
- 3. Miao, M., Xin, J. H., 2017. Engineering of
High-Performance Textiles. Woodhead
Publishing, 306-307.
- 4. Groop, E.E., Nowicki, A.W., Calle, C.I.,
Buhler, C.R., ve Mantovani, J.G., 2003.
Comparison of Surface Resistivity and
Triboelectric Charge Generation
Characteristics of Materials. In: Proceedings of
the 40th Space Congress.
- 5. Asanovic, K.A., Mihajlidi, T.A., Milosavljevic,
S.V., Cerovic, D.D., Dojcilovic, J.R., 2007.
Investigation of the Electrical Behavior of
Some Textile Materials. Journal of
Electrostatics, 65(3), 162-167.
- 6. Bedeloglu, A., 2013. Electrical,
Electromagnetic Shielding and Some Physical
Properties of Hybrid Yarn-based Knitted
Fabrics. Journal of the Textile Institute,
104(11), 1247-1257.
- 7. Tokarska, M., Orpel, M., 2018. Study of
Anisotropic Electrical Resistance of Knitted
Fabrics, Textile Research Journal, Online ver.,
1-11.
- 8. Isaia, C., McNally, D., McMaster, S.A.,
Branson, D.T., 2016. Investigation of Changes
in the Electrical Properties of Novel Knitted
Conductive Textiles During Cyclic Loading.
Engineering in Medicine and Biology Society
(EMBC), IEEE 38th Annual International
Conference of the. IEEE, 6050-6061.
- 9. Lou, C.W., Lin, T.A., Chen, A.P., Lin, J.H.,
2016. Stainless Steel/polyester Woven Fabrics
and Copper/polyester Woven Fabrics:
Manufacturing Techniques and
Electromagnetic Shielding Effectiveness,
Journal of Industrial Textiles, 46(1), 214-236.
- 10. Sancak, E., Akalin, M., Usta, İ., Yuksek, M.,
Özen, M.S., 2018. The Effects of Fabric and
Conductive Wire Properties on
Electromagnetic Shielding Effectiveness and
Surface Resistivity of Interlock Knitted
Fabrics, Fibers and Polymers, 19(4), 843-853.