___

• APHA, (1997). Standard methods for the examination of water and wastewater, 19th edition, American Public Health Association, Washington, DC, USA.
• Arslan-Alaton, I., (2003). The effect of preozonation on the biocompatibility of reactive dye hydrolysates, Chemosphere, 51, 825-833.
• Arslan-Alaton, I., (2004). Homogenous photocatalytic degradation of a disperse dye and its dye bath analogue by silicadodecatungstic acid, Dyes and Pigments, 60, 2, 167-176.
• Barclay, S. ve Buckley, C., (2000). Waste minimization guide for the textile industry: A step towards cleaner production, Volume I, The South African Water Research Commission, The Pollution Research Group, South Africa.
• Cooper, S.G., (1978). The textile industry: Environmental control and energy conservation, Noyes Data Corporation, New Jersey, USA.
• Cowan, C.E., Federle, T.W., Larson, R.J. ve Feijtel, T.C., (1996). Impact of biodegradation test methods on the development and applicability of biodegradation QSARs, SAR and QSAR, Environmental Research, 5, 37-49.
• Desimone, J.M., (2002). Practical approaches to green solvents, Department of Chemical Engineering, North Carolina State University, Raleigh, NC, USA.
• EC, (2003). Integrated pollution prevention and control (IPPC) reference document on best available techniques for the textiles industry, European Commission.
• ECB, (2002). C.9 biodegradation: Zahn-Wellens test, European Chemical Bureau, Ispra (VA), Italy.
• EMG, (1993). A preliminary assessment of the need and potential for the introduction on clean technology in some industrial sectors in South Africa, Environmental Monitoring Group, Western Cape, South Africa.
• HACH, (1992). Water analysis handbook, 2nd edition, Loveland, HACH Company.
• Hendrickx, I. ve Boardman, G.D., (1995). Pollution prevention studies in the textile wet processing industry, Department of Environmental Quality, Office of Pollution Prevention, Virginia, USA.
• Howard, P.H., (2000). Biodegradation in Mackay, D. ve Boethling, R.S., eds, Handbook of Property Estimation Methods for Chemicals: Environmental and Health Sciences, CRC Press, 281- 310, Boca Raton, FL, USA.
• Howard, P.H., Hueber, A.E. ve Boethling, R.S., (1987). Biodegradation data evaluation for structure/biodegradation relations, Environmental Toxicology and Chemistry, 6, 1-10.
• Jones, H.R., (1973). Pollution control in the textile industry, Park Ridge, Noyes Data Corporation, New Jersey, USA.
• Kothuis, B. ve Schelleman, F., (1995). Rough overview of the textiles industry and the environment. discussion paper for the workshop on biotechnology for cleaner production, Institute for Applied Environmental Economics, The Netherlands.
• Kranz, P.B., Williamson, T.R. ve Randall, P.M., (1993). Replacement of hazardous material in wide web flexographic printing process, US Environmental Protection Agency, EPA/600/SR-93/149.
• Lapertot, M.E. ve Pulgarini C., (2006). Biodegradability assessment of several priority hazardous substances: Choice, application and relevance regarding toxicity and bacterial activity, Ecole Polytechnique Fe´de´ rale de Lausanne, Laboratory of Environmental Biotechnology, Lausanne, Switzerland.
• Lohse, J., Wirts, M., Ahrens, A., Heitmann, K., Lundie, S., Lißner, L. ve Wagner, A., (2003). Substitution of hazardous chemicals in products and processes, Final report, Revision 1, Directorate General Environment, Nuclear Safety and Civil Protection of the Commission of the European Communities, O¨ kopol GmbH and Kooperationsstelle Hamburg, Hamburg, Germany.
• NCDEHNR, (1995). Case studies: A compilation of successful waste reduction projects implemented by North Carolina businesses and industries, North Carolina Department of Environment, Health and Natural Resources, Office of Waste Reduction, Raleigh, North Carolina.
• NCOWR, (1993). Pollution prevention case studies, North Carolina Office of Waste Reduction, Raleigh, NC., USA.
• Norr, C., Meinecke, S. ve Brackemann, H., (2000). Modification of the Zahn–Wellens test, Federal Environmental Agency, Berlin, Germany.
• Noyes, R., (1992). Pollution prevention technology handbook, Noyes Publication, New Jersey, USA.
• NYSDEC, (1999). Environmental compliance and pollution prevention guide for the electronics and computer industry, New York State Department of Environmental Conservation Pollution Prevention Unit, USA.
• Oosterhuis, F., (2006). Substitution of hazardous chemicals: A case study in the framework of the project, Assessing innovation dynamics induced by environment policy, Institute for Environmental Studies, Amsterdam, The Netherlands.
• Orhon, D., Kabdasli, I., Germirli Babuna, F., Sozen, S., Dulkadiroglu, H., Dogruel, S., Karahan, O. ve Insel, G., (2003). Wastewater reuse for the minimization of fresh water demand in coastal areas-selected cases from the textile finishing industry, Journal of Environmental Science and Health A 38, 1641-1657.
• OTA, (1990). Coolent substitution at presmet corporation, pollution prevention case study, Office of Technical Assistance, Commonwealth of Massachusetts, Executive Office of Environmental Affairs, USA.
• OTA, (1995). Carbon dioxide replaces sulfuric acid for pH adjustment. Toxic use reduction case study, Cranston Print Works, Office of Technical Assistance, Commonwealth of Massachusetts, Executive Office of Environmental Affairs, USA.
• Ozturk, E., Yetis, U., Dilek, F.B. ve Demirer, G.N., (2009). A chemical substitution study for a wet processing textile mill in Turkey, Journal of Cleaner Production, 17, 2, 239-247.
• Pagga, U., (1997). Testing biodegradability with standardized methods. BASF Aktiengesellschaft, Ecology Department, Ludwigshafen, Germany.
• Park, J. ve Shore, J., (1984). Water for the dyehouse: Supply, consumption, recovery and disposal, Journal of Society of Dyers and Colourist, 100, 383-399.
• PRG, (1998). Waste minimisation guide for the textile industry – a step towards cleaner production, Volumes 1 and 2, Pollution Research Group, University of Natal, Durban, South Africa.
• Provost, J.R., (1992). Effluent improvement by source reduction of chemicals used in textile printing, Journal of the Society of Dyers and Colourists, 108, 260-264.
• RAC/CP, (2002). Mediterranean action plan: pollution prevention in the textile industry within the Mediterranean region, Annual Technical Publication, Regional Activity Center for Cleaner Production, September, 80-219.
• Smith, B., (1994). Future pollution prevention opportunities and needs in the textile industry in Pojasek, B., eds, Pollution Prevention Needs and Opportunities, Center for Hazardous Materials Research, Pittsburgh, USA.
• Smith, B., (1989). Pollutant source reduction: Part II - Chemical handling, American Dyestuff Reporter, 78, 4, 26-32.
• Smith, J.E. ve Whisnant, R.B., (1988). Evaluation of a Teflon-based ultraviolet light system on the disinfection of water in a textile air washer, North Carolina Office of Waste Reduction, Raleigh, NC.
• Snowden-Swan, L., (1995). Pollution prevention in the textile industry in Freeman, H.M., eds, Industrial Pollution Prevention Handbook, 829-845, NewYork: McGraw-Hill Inc.
• Steffen, Robertson and Kirsten Inc., (1993). Water and waste-water management in the textile industry, Steffen Robertson and Kirsten Ltd., Water Research Commission, Pretoria, South Africa.
• USEPA, (1997). EPA office of compliance sector notebook project: profile of the textile industry, Washington: Office of Compliance, Office of Enforcement and Compliance Assurance, U.S. Environmental Protection Agency.
• USEPA, (1995). Manual - best management practices for pollution prevention in the textile indus-try, Washington: Office of Compliance, Office of Enforcement and Compliance Assurance, U.S. Environmental Protection Agency.
• Wynne, G., Maharaj, D. ve Buckley, C., (2001). Cleaner production in the textile industry – lessons from the Danish experience. South African Dyers and Finishers Association, Natal Branch Pollution Research Group, School of Chemical Engineering, University of Natal, Durban, South Africa.
• Thorpe, B., (2005). The substitution principle: How to really promote safer chemical use, Clean Production Action, retrieved from http://www.cleanproduction.org/library/CPA_Substitution_CPPR2005.doc.