Recep AKYÜZ, Eren KULALI, Ramadan SONCU, Cem ÖZTÜRK, Mehmet KARACA

Measuring of Core Split Line Defect on Pillar Type Vented Brake Disc and Investigation of Crack Occurrence Potential on the Disc Caused by Its Geometric Deviation

Click here for manuscript sample templateIn this study, firstly, a measuring method was defined to convert the defects level to numeric data which defects were formed as missing material on the pillar type vented brake disc. Then, the geometric defects which are coming from the core on the droplets were examined with the defined method in only pillar type vented brake disc. In the last, some special performance tests were performed with these discs which are included these defects according to related standards to evaluate how risky these discs during usage in the vehicle in terms of safety. The main open point, is the defect can transform to a crack by influencing with notch effect during the worst usage conditions? In the conducted tests; it was investigated that the worst core split line defects which specified by the defined measuring flow can be caused a crack formation by proceeding notch effect under the worst usage condition. For simulating the worst usage condition, test laboratories, equipment and test track were used in these periods for performing crack test on bench, crack test with thermal shock and crack test on vehicle.

Keywords:

Brake disc, core, crack analysis, casting defect,

PDF

___

[1] Brake Rotor Thermal Cracking Procedure for Vehicles Below 4 540 kg GVWR J2928_201207, https://www.sae.org/standards/content/j2928_201207
[2] T.J. Mackin et.al., Thermal cracking in disc brakes, Engineering Failure Analysis 9, 2002, 63 – 76
[3] D.M. Stefanescu. ASM handbook Vol.15 Casting, 2002, p 516- 523
[4] D.M. Stefanescu, ASM handbook Vol.15 Casting, 2002, p 1189, p 1231
[5] Amol, A., Ravi, R., FE Prediction of Thermal Performance and Stresses in a Disc Brake System, Journal of SAE, 2572 (2008), 1, pp. 5-8
[6] C.W. Meyers and J.T. Berry, The Impact of Robotics on the Foundry Industry, Paper 30, Trans. AFS, 1979, p 107-112
[7] J S Campbell, Principles of Manufacturing Materials And Processes, Tata McGraw Hill, 1995.
[8] P C Pandey and C K Singh, Production Engineering Sciences, Standard Publishers Ltd., 2003.
[9] S Kalpakjian and S R Schmid, Manufacturing Processes for Engineering Materials, Pearson education, 2009. 4. E. Paul Degarmo, J T Black, Ronald A Kohser, Materials and processes in manufacturing, John wiley and sons, 8th edition, 1999
[10] Shaniavski, AA. Synergetical models of fatigue-surface appearance in metals: the scale levels of self-organization, the rotation effects, and density of fracture energy. In: Frantsikony PROBAMAT- 21st Century: Probabilities and Materials. Netherlands: Kluwer Academic Publisher; 1998, p.11-44.
[11] Maillot V., Fissolo. A. Degallaix. G. and Degallaix S., Thermal fatigue crack networks parameters and stability: an experimental study, In. J. Solids and Structures, 42, 759-769 (2005)
[12] Ivanova VS. Synergetics. Strength and failure of metallic materials. Russian, Moscow: Nauka; 1992.
[13] B. Goo, and C. Lim, Thermal fatigue of cast iron brake disk materials, Journal of Mechanical Science and Technology 26 (6) (2012) 1719~1724
[14] G. Gigan, V. Norman, J. Ahlström and T. Vernersson, Thermomechanical Fatigue of Grey Cast Iron Brake Discs for Heavy Vehicles, projects 2012-03662 and 2012-03625
[15] Amol A. Apte and H. Ravi,FE Prediction of Thermal Performance and Stresses in a Disc Brake System, , journal of SAE ,2008.
[16] Pevec M, et al. Elevated temperature low cycle fatigue of grey cast iron used for automotivebrake discs. Engineering Failure Analysis 2014; 42: 221-230.
[17] C. Maraveas, Y.C. Wang, T. Swailes, G. Sotiriadis, An experimental investigation of mechanical properties of structural cast iron at elevated temperatures and after cooling down, Fire Safety Journal 71 (2015) 340–352
[18] Z.Ertekin, N. Özkurt, Noise Analysis of Air Disc Brake Systems Using Wavelet Synchrosqueezed Transform, Celal Bayar University Journal of Science Volume 15, Issue 4, 2019 p 409- 414.
[19] Beloiu, DM, Ibrahim, RA. 2006. Analytical and experimental investigations of disc brake noise using the frequency‐time domain, Structural Control and Health Monitoring. The Official Journal of the International Association for Structural Control and Monitoring and of the European Association for the Control of Structures; 13(1): 277-300.
[20] Contour Measuring System, Mitutoyo, CV3200, https://www.mitutoyo.co.jp/eng/support/service/catalog/03/E15010.pdf