___

• [1] Hangai Y.,Takahashi K., Yamaguchi R., Utsunomiya T., Kitahara S., Kuwazuru O., N.Yoshikawa ,”Nondestructive observation of pore structure deformation behavior of functionally graded aluminum foam by X-ray computed tomography”, Mater. Sci. Eng. A, 556 (2012), pp. 678-684[2] Landis E.N. Keane, D.T. , “X-ray microtomography”, Mater. Charact., 61 (2010), pp. 1305-1316[3] Tsarouchas D. , Markaki A.E. , “Extraction of fibre network architecture by X-ray tomography and prediction of elastic properties using an affine analytical model”, Acta Mater., 59 (2011), pp. 6989-7002[4] Isaac A. , Sket F. , Reimers W. , Camin B. , Sauthoff G., Pyzalla A.R. , “In situ 3D quantification of the evolution of creep cavity size, shape, and spatial orientation using synchrotron X-ray tomography”, Mater. Sci. Eng. A, 478 (2008), pp. 108-118[5] Kastner J., Harrer B., Degischer H.P., “High resolution cone beam X-ray computed tomography of 3D-microstructures of cast Al-alloys”,Mater. Charact., 62 (2011), pp. 99-107[6] Olmos L., Bouvard D., Salvo L., Bellet D., Michiel M.D., ”Characterization of the swelling during sintering of uniaxially pressed copper powders by in situ X-ray microtomography”, J. Mater. Sci., 49 (2014), pp. 4225-4235[7] Weber O., Rack A., Redenbach C., Schulz M., Wirjadi O.,“Micropowder injection molding: investigation of powder-binder separation using synchrotron-based microtomography and 3D image analysis”, J. Mater. Sci., 46 (2011), pp. 3568-3573[8] Heldele R., Rath S., Merz L., Butzbach R., Hagelstein M., Hauβlt J., “X-ray tomography of powder injection moulded micro parts using synchrotron radiation”, Nucl. Istrum. Methods B, 246 (2006), pp. 211-216[9] Fang W., He X.B., Zhang R.J., Yang S.D., Qu X.H., “The effects of filling patterns on the powder–binder separation in powder injection molding”, Powder Technol., 256 (2014), pp. 367-376[10] Zoya, Z.A., Krishnamurthy, R. 2000, "The Performance Of Cbn Tools In The Machining Of Titanium Alloys", Journal of Materials Processing Technology, 100, 80-86. [11] Rahman, M., Wang, Z.G., Wong, Y.S. 2006, "A Review On High-Speed Machining Of Titanium Alloys", JSME International Journal Series C, 49 (1); 11-19, 2006.[12] Motorcu, A. R. 2009, "Nikel Esaslı Süper Alaşımların Ve Titanyum Alaşımlarının İslenebilirliği", Erciyes Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 25(1-2), 302-330.[13] Yaszemski MJ, Trantolo DJ, Lewndrowski KU, Hasırcı V, Altobelli DE, Wise DL. 2004, "Biomaterials In Orthopedics", Marcel Dekker, New York.[14] Hsu RWW, Yang CC, Huang CA, Chen YS. 2004, "Electrochemical Corrosion Properties Of Ti-6al-4v Implant Alloy İn Biological Environment" Materials Science and Engineering: A, 380(1–2),100–109.[15] Reclaru L, Lerf R, Eschler PY, Meyer JM. 2001, "Corrosion Behavior Of A Welded Stainless-Steel Orthopedic Implant", Biomaterials 22,269-279.[16] Niinomi, M., Hattori, T., Niwa, S. 2004, "Material Characteristics and Biocompatibility of Low Rigidity Titanium Alloys for Biomedical Applications", Marcel Dekker, Biomaterials in Orthopedics.[17] Dira-Green, X-Ray Control Technology: İnternet adresi: https://www.brunel.ac.uk/research/Institutes/Institute-of-Materials-and-Manufacturing/Structural-Integrity/Brunel-Innovation-Centre/Staff-CVs/Projects/DIRA-GREEN [18] Urtekin L., 2008, “Toz Enjeksiyon Kalıplanmış Steatit Seramiklerin Özelliklerine Kalıplama Ve Sinterleme Parametrelerinin Etkisinin Deneysel Olarak İncelenmesi”, Doktora Tezi, Gazi Üniversitesi Fen Bilimleri Enstitüsü[19] Katea K.H.,.Ennetib R.K., Onbattuvellic V.P. 2013, "Feedstock Properties And Injection Molding Simulations Of Bimodal Mixtures Of Nano Scale And Micro Scale Aluminum Nitride", Ceramics Internatıonal, 39( 6), 6887-6897. [20] Urtekin L., 2016, “Titanyum Esaslı Kilitleme Plakalarının Toz Enjeksiyon Kalıplama Süreci”, Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi 31, 1-8.[21] Yang S., 2015, "Optimization and evaluation of metal injection molding by using X-ray tomography", Materials Charecterization, 104, 107-115.