THERMAL AND MECHANICAL PROPERTIES OF BUILDING STONES IN AFYON AND KARAMAN REGION
THERMAL AND MECHANICAL PROPERTIES OF BUILDING STONES IN AFYON AND KARAMAN REGION
In this study, some of the physical properties of the Seydiler and Sorkun stones from Afyon and Kızılören and Kazım Karabekir stones from Karaman which have been used extensively as a building material in cities and even in neighbor cities were investigated. Used as construction components, these stones are highly praised by the people living in those areas due to their ease of handling and convenient thermal characteristics. The aim is to determine the thermal and mechanical properties of these stones. Samples were taken from two different quarries for each stone and after chemical analysis, they were subjected to thermal conductivity, specific heat capacity, water absorption, inhalation ability and mechanical strength tests. The results were compared with other building materials, especially in terms of energy saving, strength and comfort aspects.
___
- 1. Adin H. (2007). Mardin ve Midyat’ta kullanılan bina yapı taşlarının bazı fiziksel özellikleri, Mühendis ve Makine, cilt 48, sayı 570, 13-17.
- 2. Bicer A. (2019a). Some physical properties of the building Stones from Southeastern Anatolia Region, Bartın University International Journal of Natural and Applied Sciences, 2(1), 9-15.
- 3. Bicer A. (2019b). Some physical properties of the building stones from Elazıg-Nevsehir region, Nevşehir Bilim ve Teknoloji Dergisi, 8(2), 96-102.
- 4. Bicer A. (2019c). Ahlat ve Malazgirt yapı taşlarının bazı fiziksel özellikleri, Fırat Üniversitesi Müh. Bil. Dergisi, 31(2), 301-307.
- 5. Çelik M. Y. (2003). Types and usage areas of the decorative natural building stones, Madencilik, Vol.42 (1), pp. 3-15.
- 6. Devecioglu A. G. (2001). An investigation on the heat conduction parameters of porous building stones, Master Thesis, Firat University.
- 7. Devecioğlu A. G., Biçer Y. & Kavak E. (2001). Diyarbakır Karacadağ taşının bazı fiziksel özellikleri, II.GAP ve SANAYİ Kongresi, 29-30 Eylül, TMMOB Makina Mühendisleri Odası, 401-406, Diyarbakir.
- 8. Kaya A. C., Yapıcı N. & Anıl M. (2008). The usuage of Midyat Stone as a covering and building material researching, Ç.Ü Fen Bilimleri Enstitüsü Dergisi, 19(3), 94-104.
- 9. Kazancı N. & Gürbüz A. (2014). Jeolojik miras nitelikli Türkiye doğal taşları, Türkiye Jeoloji Bülteni. 57: 1.
- 10. Pivko D. (2003). Natural stones in earth’s history, Acta Geologica, 58, 73-86.
- 11. Toksoy M. (1988). Thermal conductivity coefficients of industrial materials, Journal of Engineers and Machinery, 347, 12-15.
- 12. TS 500 (2000). Turkish Standard, Ankara.
- 13. TS 699 (1978). The test and experiment methods of natural building stones, TSE, Ankara.
- 14. Vysnıauskas V. V. & Zıkas A. A. (1988). Determination of the thermal conductivity of ceramics by the Hot-Wire Technique. Heat Transfer Soviet Research, 20 (1): 137-142.
- 15. Ytong (1985). Yapı malzeme ve elemanları, özellikleri-kullanma yöntemleri (1985), Ytong, İstanbul.
- Yayın Aralığı: Yılda 2 Sayı
- Başlangıç: 2017
- Yayıncı: Bartın Üniversitesi
Sayıdaki Diğer Makaleler
A RESEARCH ON THE PHYSICAL FEATURES OF CONCRETES WITH FERRO-CHROMIUM SLAG
INVESTIGATION OF BAKIRKOY-YENIKAPI BICYCLE ROAD
Yavuz ÖZDEMİR, Şahika ÖZDEMİR, Salih ÖZALTIN
VERMİKOMPOSTUN (SOLUCAN GÜBRESİ) ÜRETİMİ VE BİTKİ BESLEMESİNDEKİ ÖNEMİ
Ezgi ABACIOĞLU, Sinem YATGIN, Elif TOKEL, Perihan YÜCESOY
THERMAL AND MECHANICAL PROPERTIES OF BUILDING STONES IN AFYON AND KARAMAN REGION
KENTSEL ARAYÜZ /ARA MEKÂN KALİTESİNİN TAKSİM ASMALIMESCİT MAHALLESİ ÜZERİNDEN OKUNMASI