Thermal Change for Photovoltaic Panels and Energy Effects

Thermal Change for Photovoltaic Panels and Energy Effects

Photovoltaic panels (solar cells), they receive photon energy from sunlight, convert them to electrical energy by the semiconductor structural features. Photovoltaic panels produce a voltage, depending on the change of functional sunlight exposure. Produced voltage and determining of provided electrical power, must be dealt with the physical parameters that uses the concepts of light and temperature. In this study, usage of monocrystalline and polycrystalline structured photovoltaic panels electrical energy conversion for different atmospheric temperature and different sunlight intensity are studied. With the realization of the applications, photovoltaic panels' thermal change effects upon the energy production is discussed. With the conclusions obtained from the research applications and analyses, for heat exchange in photovoltaic panels to effects upon energy production, the obtained principles of functional changes are interpreted.

___

  • [1] Güçlü, S., (2009). Dumlupınar Üniversitesi Merkez Kampus çevre aydınlatma elektrik enerjisinin güneş enerjisi ile sağlanması, Dumlupınar Ünv. Fen Bil. Ens. Elk-Elkt. Müh., Kütahya. [2] Turhan, K., (2011). Fotovoltaik modüller için bir gerçek saha performans ölçüm platformunun tasarımı, kurulumu ve testleri, Enerji Enstitüsü, İTÜ, İstanbul. [3] Öztürk, E., (2014). Fotovoltaik panellerin verimine modül sıcaklığının etkisinin deneysel olarak araştırılması, Karabük Ünv. Fen Bil. Ens. Elk-Elkt. Müh., Karabük. [4] Aslan, C.O., (2011). Isı etkisinin solar panel verimliliğine etkisinin incelenmesi, Marmara Ünv. Fen Bil. Ens. Mekatronik ABD, İstanbul. [5] Muhtaroğlu, T. K., (2012). Güneş enerjisini elektrik enerjisine çeviren çevre dostu sistemin tasarlanması, Gazi Ünv. Fen Bil. Ens. Elk-Elkt. Müh., Ankara. [6] Yusufoğlu, G., (2013). Şebeke elektriğinin bulunmadığı tarımsal alanlarda güneş enerjisiyle sulamanın yapılması, Marmara Ünv. Fen Bil. Ens. Makine Eğitimi ABD, İstanbul. [7] Keçel, S., (2008). Türkiye'deki bölgesel sıcaklık değişimlerinin güneş panellerinin verimliliğine etkisi, Gazi Üniversitesi Endüstriyel Sanatlar Eğitim Fakültesi Dergisi, Sayı: 22, s.12-20. [8] Sahri, A.,Toumi S., (2013). Temperature effects on the power production based Photovoltaic cells, University of Badji-Mokhtar, Annaba, Algeria. [9] Werner, L., (1969). Temperature Cycling Effects on Solar Panels, TRW Systems, Redondo Beach, California. [10] Balázs, P., (2014). Characterization of solar cells by thermal transient testing, Budapest University of Technology and Economics (BME), Department of Electron Devices, Budapest, Hungary. [11] Temaneh-Nyah, C., (2015). An investigation on the effect of operating temperature on power out put of the Photovoltaic System, Department of Electronics and Computer Engineering, University of Namibia Faulty of Engineering and IT Ongwediva, Namibia. [12] Işıker, Y., (2006). Fotovoltaik Panel Gücüne Etki Eden Çalışma Parametrelerinin Araştırılması, Makine Mühendisliği Bölümü, Harran Üniversitesi, Şanlıurfa. [13] Altaş, İ., (1998), Foto voltaj Güneş Pilleri :Eşdeğer Devre Modelleri ve Günışığı ile Sıcaklığın Etkileri, Elektrik-Elektronik Mühendisliği Bölümü ,Karadeniz Teknik Üniversitesi, Trabzon. [14] Zain, Z.M., (2013), Grid Connected Monocrytalline and Polycrystalline Photovoltaic System: A Comparative Study on Performance [15] Stutenbaeumer, Ulrich, (1999)"Equivalent model of monocrystalline, polycrystalline and amorphous silicon solar cells." Renewable Energy 18.4: 501-512. [16] Green, Martin A. (2003)"Crystalline and thin-film silicon solar cells: state of the art and future potential." Solar energy 74.3 181-192.