___

• [1] Branislav Atlagić, Mihalj Šagi, “Proposal of a modern SCADA system architecture”, Proc. of 19th Telecommunications forum TELFOR 2011 Serbia, Belgrade, November 22-24, 2011, pp. 1430 – 1433. [2] E. Stoilov, “Security in process control systems”, Sofia, 2010, pp. 3 – 5. [3] Stuart A. Boyer, “Supervisory control and data acquisition, 3rd edition” ISA-The Instrumentation, Systems, and Automation Society, ISBN 1-55617-877-8, 2004, pp. 9 – 15. [4] Minkyu Choi, “A Study of the Evolution of Wireless Communications for SCADA Systems”, CST 2013, ASTL Vol. 27, 2013 © SERSC 2013, pp. 192 – 195. [5] Shahzad, A., S. Musa, A. Aborujilah and M. Irfan, “The SCADA review: system components, architecture, protocols and future security trends”, American Journal of Applied Sciences 11 (8): 1418- 1425, ISSN: 1546-9239, doi:10. 3844 /ajassp. 2014. 1418. 1425, 2014, pp. 1418 – 1425. [6] Aditya Bagri, Richa Netto, Dhruvil Jhaveri, “Supervisory Control and Data Acquisition”, International Journal of Computer Applications (0975 – 8887) Volume 102 – No.10, September 2014,http://research.ijcaonline.org/volume102/number10/pxc3898797.pdf. [7] Technical manual TM 5-601, “Supervisory control and data acquisition (SCADA) systems for command, control, communications, computer, intelligence, surveillance, and reconnaissance (c4isr) facilities”, Headquarters, department of the army, Washington, DC, USA, 21 January 2006, pp. 3-1 – 3-4. [8] Mehdi J. Marie, Ghaida A. AL-Suhail, Hussein T. Kadhim, “Developing Al-Najaf Cement Plant using Wireless SCADA System”, International Journal of Computer Applications (0975 – 8887) Volume 64– No.13, February [9] Technical information bulletin NCS TIB 04-1 “Supervisory Control and Data Acquisition (SCADA) Systems”, Office of the manager national communications system P.O. Box 4052 Arlington, VA 22204-4052, October 2004, pp. 4 – 14. [10] Mohamed N. Lakhoua, “Application of Functional Analysis on a SCADA System of a Thermal Power Plants” Advances in Electrical and Computer Engineering Volume 9, Number 2, 2009, doi: 10.4316/AECE.2009.02014, pp. 90 – 98. [11] Savaş Şahin, “Modbus‐Based SCADA/HMI Applications”, Journal of Information Technology and Application in Education Vol. 2 Iss. 2, June 2013, pp. 61 – 66, www.jitae.org, [12] Jay Makhija, “Comparison of protocols used in remote monitoring: DNP 3.0, IEC 870-5-101 & Modbus”, M.Tech. Credit Seminar Report, Electronics Systems Group, EE Dept, IIT Bombay, November 2003, sem03_paper_03307905.pdf. [13] Dong-joo Kang and Rosslin John Robles, “Compartmentalization of Protocols in SCADA Communication”, Int. Journal of Advanced Science and Technology Volume 8, July, 2009, pp 27 – 36. [14] Jean-Pierre Thomesse, “Fieldbus technology in industrial automation”, Proceedings of the IEEE, Institute of Electrical and Electronics Engineers (IEEE), 2005, 93 (6), pp.1073-1101. [15] http://www.ni.com/white-paper/14162/en/ [16] Li Pengfei and Nie Luhua. 2009. “Remote Control Laboratory Based On LabVIEW”. In Proceedings of the 2009 Second International Conference on Intelligent Computation Technology and Automation - Volume 04 (ICICTA '09), Vol. 4. IEEE Computer Society, Washington, DC, USA, pp. 84-87. [17] http://www.ni.com/labview/. [18] Zafer Aydogmus, Omur Aydogmus, “A Web-based Remote Access Laboratory using SCADA”, IEEE Transactions on Education, Vol. 52, No. 1, February 2009, pp 126 – 132. [19] Rui Marques, Jaime Rocha, Silviano Rafael, J. F. Martins, “Design and Implementation of a Reconfigurable Remote Laboratory Using Oscilloscope/PLC Network for WWW Access”, IEEE Transactions on industrial electronics, Vol. 55, No. 6, June 2008, pp 2425 – 2432. [20] Halás Rudolf, Durina Pavol. “Remote Laboratory Plant Control”, STOC 2012 - Student competition, Ostrava, Czech Republic, 2012, http://akce.fs.vsb.cz/2012/stoc2012/. [21] Rajeev Kumar, M.L.Dewal, “Multi-Supervisory Control and Data Display”, International Journal of Computer Applications (0975 – 8887) Vol. 2 – No.1, May 2010, http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.206.4898&rep=rep1&type=pdf [22] R. K. Glisten, A. Lakshmi Sangeetha, N. Bharathi. “Remote Monitoring of PLC- SCADA based Industrial Processes using GSM Technology”, Int. Conf. on Innovations In Intelligent Instrumentation, Optimization And Signal Processing “ICIIIOSP-2013” pp. 15-20. [23] Iman Morsi, Loay Mohy El-Din, “SCADA system for oil refinery control,” Measurement, 47, 2014, pp. 5-13. [24] Mayur Avhad, Vinit Divekar, Harshad Golatkar, Sanket Joshi, “Microcontroller based Automation system using Industry standard SCADA”, Annual IEEE India Conference (INDICON) 2013. [25] Mr. Neeraj Khera, Sumit Balguvhar, “Design of microcontroller based wireless SCADA system for real time data”, UACEE International Journal of Advances in Electonics Engineering Volume 2 : Issue 1 ISSN 2278 - 215X (Online), pp 18 – 20. [26] R. Popov, A. Georgiev. SCADA system for study of installation consisting of solar collectors, phase change materials and borehole storages. Proc. of the 2nd Int. Conf. on Sustainable Energy Storage, June 19-21, 2013, Trinity College Dublin, Ireland, pp. 206-211. [27] B. Sakowicz, D. Makowski, P. Sekalski, P. Marciniak, R. Kotas, G. Skrabalak, R. Talar, M. Rosinski, and A. Napieralski, “Control and Monitoring System for Composite Materials Fabrication Based on PPS Method”, International Journal of Modeling and Optimization, Vol. 3, No. 5, October 2013, pp 445 – 449.