The road disturbance attenuation for quarter car active suspension system via a new static two-degree-of-freedom design

The road disturbance attenuation for quarter car active suspension system via a new static two-degree-of-freedom design

The main aim of this paper is to attenuate the effects of the road disturbance on the quarter-car active suspension system (ASS) for the passenger comfort by using design. Therefore, a new static disturbance compensator is proposed by using linear matrix inequality method such that the disturbance compensator and feedback controller are simultaneously designed for the disturbances in the linear time-invariant systems, which are measurable or predictable. They have static structure, and the disturbance compensator is designed on the feedforward path. The design is applied against the road disturbance affecting the quarter car ASS. The effectiveness of the design is demonstrated with the simulations.

___

  • [1] Adam, E. J. and Marchetti, J. L., Designing and tuning robust feedforward controllers, Computers and Chemical Engineering, 28(9) 1899–1911 (2004).
  • [2] Méndez-Acosta, H. O., Campos-Delgado, D. U., Femat, R. and González-Alvarez, V., A robust feedforward/feedback control for an anaerobic digester, Computers & Chemical Engineering, 29 (7), 1613–1623 (2005).
  • [3] Peng, C., Zhang, Z., Zou, J., Li, K. and Zhang, J., Internal model based robust inversion feedforward and feedback 2DOF control for LPV system with disturbance, Journal of Process Control, 23, (10), 1415–1425 (2013).
  • [4] Guzmán, J. L., Hägglund, T., Veronesi, M. and Visioli, A., Performance indices for feedforward control, Journal of Process Control, 26, 26–34, (2015).
  • [5] Rodríguez, C., Normey-Rico, J. E., Guzmán, J. L. and Berenguel, M., On the filtered Smith predictor with feedforward compensation, Journal of Process Control, 41, 35–46, (2016).
  • [6] Graichen, K., Treuer, M. and Zeitz, M., Swing-up of the double pendulum on a cart by feedforward and feedback control with experimental validation, Automatica, 43(1), 63–71 (2007).
  • [7] Jin, N., Wang, X., Gao, H. and Liu, J., Sliding mode based speed regulating of PMSM MTPA control system for electrical vehicles, in Electronic and Mechanical Engineering and Information Technology (EMEIT), 2011 International Conference on, 2, 987–992 (2011).
  • [8] Babazadeh, M. and Karimi, H., A robust twodegree-of-freedom control strategy for an islanded microgrid, IEEE Transactions on Power Delivery, 28(3), 1339–1347 (2013).
  • [9] Altun, Y. and Gulez, K., Linear parameter varying feedforward control synthesis using parameterdependent Lyapunov function, Nonlinear Dynamics, 78(4), 2293–2307 (2014).
  • [10] Altun, Y., Gulez, K. and Mumcu, T. V., Static LPV feedforward controller synthesis for Linear Parameter Varying systems, Control Conference (ASCC), 9th Asian. 1–4 (2013).
  • [11] Alma, M., Martinez, J. J., Landau, I. D. and Buche, G., Design and Tuning of Reduced Order H-Infinity Feedforward Compensators for Active Vibration Control, IEEE Transactions on Control Systems Technology, 20(2), 554–561 (2012).
  • [12] Zhang, J., Xu, H., Zou, Q. and Peng, C., Inversionbased robust feedforward–feedback two-degree-offreedom control approach for multi-input multioutput systems with uncertainty, IET Control Theory & Applications, 6(14), 2279–2291 (2012).
  • [13] Alvarez-Sánchez, E., A Quarter-Car Suspension System: Car Body Mass Estimator and Sliding Mode Control, Procedia Technology, 7, 208–214 (2013).
  • [14] Foda, S. G., Fuzzy control of a quarter-car suspension system, in Proceedings of the International Conference on Microelectronics, ICM, vol. 2000–October, 231–234 (2000).
  • [15] Van Der Sande, T. P. J., Gysen, B. L. J., Besselink, I. J. M., Paulides, J. J. H., Lomonova, E. A. and Nijmeijer, H., Robust control of an electromagnetic active suspension system: Simulations and measurements, Mechatronics, 23(2), 204–212 (2013).
  • [16] Chen, X. and Tomizuka, M., Selective model inversion and adaptive disturbance observer for time-varying vibration rejection on an activesuspension benchmark, European Journal of Control, 19(4), 300–312 (2013).
  • [17] Pan, H., Jing, X. and Sun, W., Robust finite-time tracking control for nonlinear suspension systems via disturbance compensation, Mechanical Systems and Signal Processing, 88, 49–61 (2017).
  • [18] Karimi, A. and Emedi, Z., H∞ gain-scheduled controller design for rejection of time-varying narrow-band disturbances applied to a benchmark problem, European Journal of Control, 19(4), 279– 288 (2013).
  • [19] Choi, H. D., Ahn, C. K., Lim, M. T. and Song, M. K., Dynamic output-feedback H∞ control for active half-vehicle suspension systems with time-varying input delay, International Journal of Control, Automation and Systems, 14(1), 59–68 (2016).
  • [20] Shukla, P., Ghodki, D., Manjarekar, N. S., and Singru, P. M., A Study of H infinity and H2 synthesis for Active Vibration Control, IFAC-PapersOnLine, 49(1), 623–628 (2016).
  • [21] Wang, G., Chen, C. and Yu, S., Optimization and static output-feedback control for half-car active suspensions with constrained information, Journal of Sound and Vibration, 378, 1–13 (2016).
  • [22] Sun, W., Li, J., Zhao, Y. and Gao, H., Vibration control for active seat suspension systems via dynamic output feedback with limited frequency characteristic, Mechatronics, 21(1), 250–260 (2011).
  • [23] Ghazaly, N. M., Ahmed, A. E. N. S., Ali, A. S. and El-Jaber, G. T. A., H∞ control of active suspension system for a quarter car model, International Journal of Vehicle Structures and Systems, 8(1), 35– 40 (2016).
  • [24] Han, S. Y., Chen, Y. H., Ma, K., Wang, D., Abraham, A. and Liu, Z. G., Feedforward and feedback optimal vibration rejection for active suspension discrete-time systems under in-vehicle networks, in 2014 6th World Congress on Nature and Biologically Inspired Computing, NaBIC 2014, 139–144 (2014).
  • [25] Boyd, S. P., El Ghaoui, L., Feron, E. and Balakrishnan, V., Linear matrix inequalities in system and control theory, 15th SIAM (1994).
  • [26] Löfberg, J., Automatic robust convex programming, Optimization Methods and Software, 27(1), 115–129 (2012).
  • [27] Labit, Y., Peaucelle, D. and Henrion, D., SEDUMI INTERFACE 1.02: A tool for solving LMI problems with SEDUMI, in 2002 IEEE International Symposium on Computer Aided Control System Design, CACSD 2002 - Proceedings, 272–277 (2002).