Çağrı TÜRKÖZ, Çağrı ULUSOY, Deniz GENCER

Yeniden Kazanılmış Braketlerin Bağlanma Kuvvetlerinin Farklı Yapıştırıcılar ile Değerlendirilmesi

Ortodontik tedavi sırasında kopan veya yerinin değiştirilmesi gereken braketlerin geri dönüşüm işlemi ile yeniden kazandırılması yöntemine, maliyet ve zaman kaybının önüne geçmek amacıyla sıklıkla başvurulmaktadır. Bu çalışmada, yeniden kazanılan braketlerin değişik yapıştırıcılarla bağlanma kuvvetleri incelenmiştir.Çalışmada, ortodontik tedavi amacıyla yeni çekilmiş 30 çürüksüz maksiller premolar diş kullanılmıştır. Bu dişlere Transbond XT ortodontik yapıştırıcı kullanılarak braketler yapıştırılmış ve daha sonra bilgisayar destekli Universal test cihazı kullanılarak bağlanma kuvvetleri ölçülmüştür. Kopan braketlerin üzerindeki artık kompozit, 50 µm’ lik alüminyum oksit tozu püskürten bir kumlama cihazı ile temizlenmiştir.Dişlerin üzerindeki kompozitler temizlendikten sonra 10’ ar dişlik 3 grup oluşturulmuş ve gruplardaki dişlere sırasıyla Transbond XT, tek aşamalı rezin modifiye cam iyonomer siman RMCIS ve Clearfil Protect Bond kullanılarak braketler yapıştırılmıştır. Braketlerin bağlanma kuvvetleri yine Universal test cihazı ile ölçülmüştür.Yeni braketlere Transbond XT ve yeniden kazanılmış braketlere Transbond XT, RMCIS ve Clearfil Protect Bond uygulandığında elde edilen bağlanma değerlerinin tüm gruplar için klinik olarak kabul edilebilir sınırlar içinde olduğu bulunmuştur. En yüksek ortalama bağlanma kuvveti 12,92±1,81 MPa’ lık değer ile Clearfil Protect Bond grubunda ölçülmüştür

Anahtar Kelimeler:

Yeniden kazanılmış braketler, bağlanma kuvveti, ortodontik yapıştırıcılar

Evaluation of Shear Bond Strengths of Recycled Brackets With Different Orthodontic Adhesives

Recycled brackets are oftenly used during orthodontic therapy. Shear bond strength SBS values of recycled brackets bonded with different adhesives were evaluated in this study. Thirty freshly extracted, caries free maxillary premolars were used in this study. Brackets were bonded to teeth using Transbond XT orthodontic adhesive than SBS values were evaluated with a Universal testing machine.Residual adhesives on brackets were cleaned with a sandblaster using 50 µm aluminium oxide powder. Residual adhesives on teeth were also cleaned and than 3 groups were formed as 10 teeth per group. Recycled brackets were bonded to teeth with Transbond XT, resin modified glass ionomer cement and Clearfil Protect Bond respectively in each group. SBS values were again evaluated with a Universal testing machine.All the groups’ mean SBS values were found to be within the clinical acceptable range and highest mean SBS value was found as 12,92±1,81 MPa in Clearfil Protect Bond group

Keywords:

Recycled brackets, shear bond strength, orthodontic adhesives,

PDF

___

Linklater R.A., Gordon P.H. An ex vivo study
to investigate bond strengths of different tooth types. J. Orthod. 28: 59-65, 2001.
Mattick C.R., Hobson R.S. A comparative micro
topographic study of the buccal enamel of differ- ent tooth types. J. Orthod. 27:143 -148, 2000.
O’Brien K.D., Read M.J., Sandison R.J., Roberts
C.T. A visible light-activated direct-bonding ma- terial: an in vivo comparative study. Am. J. Or- thod. Dentofacial Orthop. 95: 348-351, 1989.
Adolfsson U., Larsson E., Ogaard B. Bond fail
ure of a no-mix adhesive during orthodontic treat- ment. Am. J. Orthod. Dentofacial Orthop. 122: 277-281, 2002.
Asgari S., Salas A., English J., Powers J. Clini
cal evaluation of bond failure rates with a new self-etching primer J. Clin. Orthod. 36: 687-689, 2002.
Elekdag-Turk S., Isci D., Turk T., Cakmak F. Six- month bracket failure rate evaluation of a self- etching primer. Eur. J. Orthod. 30: 211-216, 2008.
Millett D.T., McCluskey L.A., McAuley F., Cre- anor S.L., Newell J., Love J. A comparative clini- cal trial of a compomer and a resin adhesive for orthodontic bonding. Angle Orthod. 70: 233- 240, 2000.
Arhun N., Arman A., Sesen C., Karabulut E., Korkmaz Y., Gokalp S. Shear bond strength of orthodontic brackets with 3 self-etch adhesives. Am. J. Orthod. Dentofacial Orthop. 129: 547- 550, 2006.
Rüger D., Harzer W., Krisjane Z., Tausche E. Shear bond strength after multiple bracket bond- ing with or without repeated etching. Eur. J. Or- thod. 2010 Nov 19.[Epub ahead of print]
Hitmi L., Muller C., Mujajic M., Attal J.P. An
month clinical study of bond failures with res- in- modified glass ionomer cement in orthodontic practice. Am. J. Orthod. Dentofacial. Orthop. 120: 406- 415, 2001.
Pashley D.H., Sano H., Ciucchi B., Yoshiyama
M., Carvalho R.M. Adhesion testing of dentin bonding agents: a review. Dent. Mater. 11: 117-125, 1995.
Reynolds I.R., von Fraunhofer J.A. Direct bond
ing in orthodontic attachments to teeth: the rela- tion of adhesive bond strength to gauze mesh size. Br. J. Orthod. 3:91-95, 1975.
Brown C.R., Way D.C. Enamel loss during orth
odontic bonding and subsequent loss during removal of filled and unfilled adhesives. Am. J. Orthod. 74: 663-671, 1978. Gwinnett A.J., Gorelick L. Microscopic evalua- tion of enamel after debonding: clinical applica- tion. Am. J. Orthod. 71: 651-665, 1977.
Cehreli Z.C., Kecik D, Kocadereli I. Effect of self
etching primer and adhesive formulations on the shear bond strength of orthodon- tic brackets. Am. J. Orthod. Dentofacial Orthop. 127: 573- 579, 2005.
Davari A.R., Yassaei S, Daneshkazemi A.R.
Yosefi M.H. Effect of different types of enamel conditioners on the bond strength of orthodon- tic brackets. J. Contemp. Dent. Pract. 8:36-43, 2007.
Katona T.R., Long R.W. Effect of loading mode
on bond strength of orthodontic brackets bonded with 2 systems. Am. J. Orthod. Dentofacial Or- thop. 129:60-64, 2006.
Urabe H., Rossouw P.E., Titley K.C., Yamin C.
Combination of etch- ants, composite resins, and bracket systems: an important choice of orth- odontic bonding procedures. Angle Orthod. 69: 267-275, 1999.
Wickwire N.A., Rentz D. Enamel pretreatment: a
critical variable in direct bonding systems. Am. J. Orthod. 64:499-512, 1973.
Zachrisson B.U., Brobakken B.O. Clinical com
parison of direct versus indirect bonding with different bracket types and adhesives. Am. J. Or- thod. 74:62-77, 1978.
Basudan A.M., Al-Emran S.E. The effects of in
office reconditioning on the morphology of slots and bases of stainless steel brackets and on the shear/peel bond strength. J. Orthod. 28:231- 236, 2001.
Sonis A.L. Air abrasion of failed bonded metal
brackets: a study of shear bond strength and sur- face characteristic as determined by scaninng electron microscopy. Am. J. Orthod. Dentofacial Orthop. 110: 96-98, 1996.
Artun J, Bergland S. Clinical trials with crystal
growth conditioning as an alternative to acid- etch enamel pretreatment. Am J Orthod 85: 333- 340, 1984.
Chung K.H., Hwang Y.C. Bonding strengths of
porcelain repair systems with various surface treatments. J. Prosthet. Dent. 78: 267–274, 1997.
Miller S., Zernik J.H. Sandblasting of bands to
increase bond strength. J. Clin. Orthod. 30: 217–222, 1996.
Millett D.T., McCabe J.F., Bennett T.G., Carter
N.E., Gordon P.H. The effect of sandblasting on retention of first molars orthodontic bands cemented with glass ionomer cement. Br. J. Or- thod. 22: 161–169, 1995.
Zachrisson B.U., Büyükyılmaz T., Zachrisson Y. Improving orthodontic bonding to silver amal- gam. Angle Orthod. 65: 35–42, 1995.
Sunna S., Rock W.P. An ex vivo investigation
into the bond strength of orthodontic brackets and adhesive systems. Br. J. Orthod. 26: 47-50, 1999.
Scougall Vilchis R.J., Yamamoto S., Kitai N.
Yamamoto K. Shear bond strength of orthodontic brackets bonded with different self-etching adhe- sives. Am. J. Orthod. Dentofacial Orthop. 136: 425-30, 2009.
Oztürk B., Malkoç S., Koyuturk A.E., Catalbas
B., Ozer F. Influence of different tooth types on the bond strength of two orthodontic adhesive systems. Eur. J. Orthod. 30: 407-12, 2008.
Seçkin Ö., Erdinç Ertan A.M., Dinçer B., Işıksal
E. Geri Dönüşüm Yöntemi ile Yeniden Kazanılan Braketlerde Braket Tutuculuğunun Araştırılması. E.Ü. Dişhek. Fak. Derg. 29: 119-124, 2008.
Bishara S.E., Soliman M., Laffoon J., Warren
J.J. Effect of antimicrobial monomer-containing adhesive on shear bond strength of orthodontic brackets. Angle Orthod. 75: 397-9, 2005.
Polat O., Uysal T., Karaman A.I. Efffects of a
chlorhexidine varnish on shear bond strength in indirect bonding. Angle Orthod. 75:1036- 1040, 2005.
Scougall Vilchis R.J., Yamamoto S., Kitai N.
Hotta M., Yamamoto K. Shear bond strength of a new fluoride-releasing orthodontic adhesive. Dent Mater J. 26:45-51, 2007.
Cacciafesta V., Sfondrini M.F., Calvi D., Scrib
ante A. Effect of fluoride application on shear bond strength of brackets bonded with a resin- modified glass-ionomer. Am. J. Orthod. Dentofa- cial Orthop. 127: 580-583, 2005.
Korbmacher H.M., Huck L., Kahl-Nieke B. Flu
oride-releasing adhesive and antimicrobial self- etching primer effects on shear bond strength of orthodontic brackets, Angle Orthod. 76: 843– 848, 2006. Attar N., Taner T.U., Tulumen E., Korkmaz Y. Shear bond strength of orthodontic brackets bonded using conventional vs one and two step self-etching/adhesive systems, Angle Orthod. 77: 518–523, 2007.