___

• [1] Campilho RDSG, Banea MD, Pinto AMG, daSilva LFM, deJesus AMP. Strength prediction of single- and double-lap joints by standard and extended finite element modeling. International Journal of Adhesion & Adhesives 2011; 31: 363–372.
• [2] Liao L, Huang C. Numerical analysis of effects of adhesive type and geometry on mixed-mode failure of adhesive joint. International Journal of Adhesion&Adhesives2016; 68: 389–396.
• [3] Zou GP, Taheri F. Stress analysis of adhesively bonded sandwich pipe joints subjected to torsional loading. International Journal of Solids and Structures 2006; 43: 5953–5968.
• [4] Das RR, Pradhan B. Adhesion failure analyses of bonded tubular single lap joints in laminated fibre reinforced plastic composites. International Journal of Adhesion & Adhesives 2010; 30: 425–438.
• [5] Parashar A, Mertiny P. Adhesively bonded composite tubular joints: Review. International Journal of Adhesion & Adhesives 2012; 38: 58–68.
• [6] LeBono J, Barton L, Birkett M. Low temperature tensile lap-shear testing of adhesively bonded polyethylene pipe. International Journal of Adhesion & Adhesives 2017; 74: 57–63.
• [7] Çitil Ş, Ayaz Y, Temiz Ş, Aydın MD. Mechanical behaviour of adhesively repaired pipes subject to internal pressure. International Journal of Adhesion and Adhesives 2017; 75: 88–95.
• [8] Hashim SA, Cowling MJ, Laerty S. The integrity of bonded joints in large composite pipes. International Journal of Adhesion & Adhesives 1998; 18: 421-429.
• [9] Esmaeel RA, Taheri F. Influence of adherend’s delamination on the response of single lap and socket tubular adhesively bonded joints subjected to torsion. Composite Structures 2011; 93: 1765–1774.
• [10] Woo KS, Ahn JS, Yang SH. Cylindrical discrete-layer model for analysis of circumferential cracked pipes with externally bonded composite materials. Composite Structures 2016; 143: 317–323.
• [11] Grassi M, Cox B, Zhang X. Simulation of pin-reinforced single-lap composite joints. Composites Science and Technology2006; 66: 1623–1638.
• [12] Li H, Zhang X, Qi D, Cai X, Ding N, Wei B, Qi G. Failure analysis of the adhesive metal joint bonded on anticorrosion plastic alloy composite pipe. Engineering Failure Analysis 2015; 47: 49–55.
• [13] Das RR, Baishya N. Failure Analysis of Bonded Composite Pipe joints subjected to internal Pressure and Axial loading. Procedia Engineering 2016; 144: 1047 – 1054.
• [14] Ayaz Y, Çitil Ş, Şahan MF. Repair of small damages in steel pipes with composite patches. Materials Science & Engineering Technology 2016; 47: 503-511.
• [15] Çitil Ş, Ayaz Y, Temiz Ş, Aydın MD. Mechanical behaviour of adhesively repaired pipes subject to internal Pressure. International Journal of Adhesion and Adhesives 2017; 75: 88–95.
• [16] Zarrinzadeh H, Kabir MZ, Deylami A. Experimental and numerical fatigue crack growth of an aluminium pipe repaired by composite patch. Engineering Structures 2017; 133: 24–32.
• [17] Parashar A, Mertiny P. Adhesively bonded composite tubular joints: Review. International Journal of Adhesion & Adhesives 2012; 38: 58–68.
• [18] ISO 527−1: Plastics-determination of tensile properties. Part 1: General principles,1993.
• [19] ISO 527−2: Plastics-determination of tensile properties. Part 2: Test conditions for moulding and extrusion of plastics. 1993.
• [20] ANSYS. The general purpose finite element software (version 15) Inc., 275 Technology Drive, Canonsburg, PA, USA, 15317, 2015.