___

• Feldens EG, Feldens CA, de Araujo FB, Souza MA. Invasive techni- que of pit and fissure sealants in primary molars: a SEM study. J Clin Pe- diatr Dent 1994;18:187-90.
• Duangthip D, Lussi A. Effects of fissure cleaning methods, drying agents, and fissure morphology on microleakage and penetration ability of sealants in vitro. Pediatr Dent 2003;25:527-33.
• Salama FS, Al-Hammad NS. Marginal seal of sealant and compomer materials with and without enameloplasty. Int J Paediatr Dent 2002;12:39-46.
• El-Housseiny AA, Sharaf AA. Evaluation of fissure sealant applied to topical fluoride treated teeth. J Clin Pediatr Dent 2005;29:215-9.
• Gordon PH, Nunn JH. Fissure sealants. In: Murray JJ, ed. The Pre- vention of Oral Disease. 3rded. New York: Oxford University Press; 1996. p.78-94.
• Barroso JM, Torres CP, Lessa FC, Pecora JD, Palma-Dibb RG, Bor- satto MC. Shear bond strength of pit-and-fissure sealants to saliva-con- taminated and noncontaminated enamel. J Dent Child (Chic) 2005;72:95-9.
• Tulunoglu O, Bodur H, Uçtaşli M, Alaçam A. The effect of bonding agents on the microleakage and bond strength of sealant in primary teeth. J Oral Rehabil 1999;26:436-41.
• Van Meerbeek B, De Munck J, Mattar D, Van Landuyt K, Lambrechts P. Microtensile bond strengths of an etch & rinse and self-etch adhe- sive to enamel and dentin as a function of surface treatment. Oper Dent 2003;28:647-60.
• Jones EF. A 2-year clinical evaluation of two pit and fissure sealants placed with and without the use of a bonding agent. Quintessence Int 1993;24:131-3.
• Cehreli ZC, Gungor HC. Quantitative microleakage evaluation of fis- sure sealants applied with or without a bonding agent: results after four- year water storage in vitro. J Adhes Dent 2008;10:379-84.
• Gomes-Silva JM, Torres CP, Contente MM, Oliveira MA, Palma- Dibb RG, Borsatto MC. Bond strength of a pit-and-fissure sealant as- sociated to etch-and-rinse and self-etching adhesive systems to saliva-contaminated enamel: individual vs. simultaneous light curing. Braz Dent J 2008;19:341-7.
• Feigal RJ, Quelhas I. Clinical trial of a self-etching adhesive for sea- lant application: success at 24 months with Prompt L-Pop. Am J Dent 2003;16:249-51.
• Venker DJ, Kuthy RA, Qian F, Kanellis MJ. Twelve-month sealant re- tention in a school-based program using a self-etching primer/adhesive. J Public Health Dent 2004;64:191-7.
• Perdigao J, Carmo AR, Anauate-Netto C, Amore R, Lewgoy HR, Cordeiro HJ, et al. Clinical performance of a self-etching adhesive at 18 months. Am J Dent 2005;18:135-40.
• Grande RH, Ballester R, Singer Jda M, Santos JF. Microleakage of a universal adhesive used as a fissure sealant. Am J Dent 1998;11:109- 13.
• Waggoner WF, Siegal M. Pit and fissure sealant application: upda- ting the technique. J Am Dent Assoc 1996;127:351-61.
• Mickenautsch S, Mount G, Yengopal V. Therapeutic effect of glass- ionomers: an overview of evidence. Aust Dent J 2011;56:10-5.
• Kern M, Thompson VP. Influence of prolonged thermal cycling and water storage on the tensile bond strength of composite to NiCr alloy. Dent Mater 1994;10:19-25.
• Pinar A, Sepet E, Aren G, Bölükbaşi N, Ulukapi H, Turan N. Clinical performance of sealants with and without a bonding agent. Quintes- sence Int 2005;36:355-60.
• Boksman L, McConnell RJ, Carson B, McCutcheon-Jones EF. A 2-year clinical evaluation of two pit and fissure sealants placed with and without the use of a bonding agent. Quintessence Int 1993;24:131- 3.
• Koyuturk AE, Akca T, Yucel AC, Yesilyurt C. Effect of thermal cycling on microleakage of a fissure sealant polymerized with different light so- urces. Dent Mater J 2006;25:713-8.
• Burrow MF, Burrow JF, Makinson OF. Pits and fissures: etch resis- tance in prismless enamel walls. Aust Dent J 2001;46:258-62.
• Gwinnett AJ. Human prismless enamel and its influence on sealant penetration. Arch Oral Biol 1973;18:441-4.
• Shimada Y, Tagami J. Effects of regional enamel and prism orien- tation on resin bonding. Oper Dent 2003;28:20-7.
• Finger WJ, Fritz U. Laboratory evaluation of one-component ena- mel/dentin bonding agents. Am J Dent 1996;9:206-10.
• Barkmeier WW, Los SA, Triolo PT Jr. Bond strengths and SEM eva- luation of Clearfil Liner Bond 2. Am J Dent 1995;8:289-93.
• Kanemura N, Sano H, Tagami J. Tensile bond strength to and SEM evaluation of ground and intact enamel surfaces. J Dent 1999;27:523- 30.
• Al-Sarheed MA. Evaluation of shear bond strength and SEM obser- vation of all-in-one self-etching primer used for bonding of fissure sea- lants. J Contemp Dent Pract 2006;7:9-16.
• Dhillon JK, Pathak A. Comparative evaluation of shear bond strength of three pit and fissure sealants using conventional etch or self-etching primer. J Indian Soc Pedod Prev Dent 2012;30:288-92.
• Feigal RJ, Musherure P, Gillespie B, Levy-Polack M, Quelhas I, Heb- ling J. Improved sealant retention with bonding agents: a clinical study of two-bottle and single-bottle systems. J Dent Res 2000;79:1850-6.
• Duangthip D, Lussi A. Microleakage and penetration ability of resin sealant versus bonding system when applied following contamination. Pediatr Dent 2003;25:505-11.
• Jaffer F, Finer Y, Santerre JP. Interactions between resin monomers and commercial composite resins with human saliva derived esterases. Biomaterials 2002;23:1707-19.
• Nikaido T, Kunzelmann KH, Ogata M, Harada N, Yamaguchi S, Cox CF, et al. The in vitro dentin bond strengths of two adhesive systems in class I cavities of human molars. J Adhes Dent 2002;4:31-9.
• Peutzfeldt A, Asmussen E. Determinants of in vitro gap formation of resin composites. J Dent 2004;32:109-15.
• Fissür örtücünün altına uygulanan adezivlerin makaslama bağlanma kuvveti ve
• mikrosızıntıya etkisi