THE USE OF ELECTROLESS COATING IN THE PRODUCTION OF HIGH CERAMIC-TO-METAL RATIO COMPOSITES USING WC POWDER
THE USE OF ELECTROLESS COATING IN THE PRODUCTION OF HIGH CERAMIC-TO-METAL RATIO COMPOSITES USING WC POWDER
In this study, the production of high ceramic-to-metal ratio composite using tungsten carbide (WC) powders plated with Nickel (Ni) by electroless method was attempted by means of transient liquid phase sintering. Microstructural characterization in specimens before and after sintering process have been carried out using Scanning Electron Microscope (SEM) and DTA-TG and XRD techniques and microhardness measurements for various processing conditions. Results showed that WC powders can be successfully Ni plated by electroless plating method and optimal condition for the production of high ceramic-to-metal ratio composite is found to be 1150 ˚C in both air and Ar protected furnace conditions.
Keywords:
Electroless Nickel Plating, , Composite Materials , Sintering,
___
- Wang P T, Powder Technology 54(2) (1988) 107-118
- Colak F, Production and Analysis of Ceramic-Metal Composite Material by Using Tungsten Carbide Powders Coated with Nickel by Chemical Technique, Master Thesis, University of Afyon Kocatepe, Turkey (2004)
- Grosjean A, Rezrazi M, Takadoum J, Berçot P, Surface and Coatings Technology 137(1) (2001) 92
- Małecki A, Micek-Ilnicka A, Surface and Coatings Technology 123(1) (2000) 72
- Krishnaveni, K, Sankara Narayanan T S N, Seshadri, S K, Journal of Alloys and Compounds, 466(1-2) (2008) 412–420
- Ling G P, and Li Y, Materials Letters 59(13) (2005) 1610–1613
- Luo L, Wu Y, Li J,et al. Surface and Coatings Technology 206(6) (2011) 1091–1095
- Luo L, Yu J, Luo J, et al. Ceramics International 36(6) (2010) 1989–1992
- Michalski J, Wejrzanowski T, Gierlotka S, et al. Journal of the European Ceramic Society 27 (2007) 831–836
- Xia C R, Guo X X, Li F Q, et al. Colloids and Surfaces A: Physicochemical and Engineering Aspects 179 (2001) 229–235
- Wang H, Jia J, Song H, et al. Ceramics International 37(7) (2011) 2181–2184
- Zhang Q, Wu M, and Zhao W, Surface and Coatings Technology 192 (2005) 213–219
- Sharma A K, Suresh M R, Bhojraj H, et al. Metal Finishing, 96(3) (1998) 10
- Velez M, Quinones H, Di Giampaolo A R, et al. International Journal of Refractory Metals and Hard Materials 17 (1999) 99
- Simeonova Y, Danev K, Gidikova N, et al. Proceedings World Tribology Congress. 1997, London.
- Svensson L E, in Control of Microstructures and Properties in Steel Arc Welds, Library of Congress Cataloging-in-Published Data, British, 1994
- Başlangıç: 2018
- Yayıncı: Uşak Üniversitesi