ŞEBNEM DÜZYER GEBİZLİ, ASLI HOCKENBERGER, AGAH UĞUZ, Elif EVKE, Zeynep KAHVECİ

EFFECT OF ETHYLENE OXIDE, AUTOCLAVE AND ULTRA VIOLET STERILIZATIONS ON SURFACE TOPOGRAPHY OF PET ELECTROSPUN FIBERS

Bu çalışmanın amacı farklı sterilizasyon metodlarının elektroçekim polyester lifleri üzerindeki etkisini incelemektir. PET lifleri; ağırlıkça %10,15 ve 20 oranında polietilen tereftalat (PET) içeren çözeltilerden elektroçekim yöntemiyle üretilmiş ve etilen oksit (EO), otoklav (AU) ve ultraviyole (UV) ile sterilize edilmiştir. Üretilen yüzeylerin yüzey karakterizasyonu taramalı elektron mikroskobu (SEM), atomik kuvvet mikroskobu (AFM), yüzey gözeneklilik boyutu analizleri ve temas açısı ölçümleriyle gerçekleştirilmiştir. Yüzeylerin termal özellikleri Diferansiyel taramalı kalorimetre (DSC) testleri; mikro yapısal özellikleri Fourier Transform Infrared spektroskopisi (FTIR) ile araştırılmıştır. SEM çalışmaları farklı sterilizasyon yöntemlerinin, polimer konsantrasyonuna bağlı olarak büyük değişikliklere neden olduğunu göstermiştir. Artan polimer konsantrasyonu ile yöntemlerin etkileri azalma gösterse de, lif yapısı -özellikle EO sterilizasyonunda oldukça zarar görmüştür. Temas açısı değerlerinde UV sterilizasyonu sonrası büyük düşüş görülmüştür

Etilen oksit, Otoklav ve Ultra Viyole Sterilizasyonlarıının PET Elektroçekim Liflerin Yüzey TopografisiÜzerine Etkisi

The aim of this study to investigate the effects of different sterilization methods on electrospun polyester. Ethylene oxide (EO), autoclave (AU) and ultraviolet (UV) sterilization methods were applied to electrospun fibers produced from polyethylene terephthalate (PET) solutions with concentrations of 10, 15 and 20 wt.%. The surface characteristics of the fibers were examined by scanning electron microscope (SEM), atomic force microscope (AFM), surface pore size studies and contact angle measurements. Differential scanning calorimetry (DSC) tests were carried out to characterize the thermal properties. Fourier Transform Infrared spectroscopy (FTIR) tests were performed to analyze the micro structural properties. SEM studies showed that different sterilization methods made significant changes on the surfaces of the fibers depending on the PET concentration. Although the effects were decreased with the increasing polymer concentration, the fiber structure was damaged especially with the EO sterilization. The contact angle values were decreased with the UV sterilization method the most

PDF

___

Badylak, S. F., Freytes, D. O., Gilbert, T.W. (2009). Extracellular matrix as a biological scaffold material: Structure and function Acta Biomaterialia, 5(1), 1-13.doi: 10.1016/j.actbio.2008.09.013
Block, S. S. (2001). Disinfection, Sterilization and Preservation (Lippincott Williams, Wilkins, Philadelphia, USA. p. 695. ISBN:0-683-30740-1
Chen, Z., Hay, J. N., Jenkins, M. J., (2013). The Thermal Analysis of Poly (ethylene terephthalate) by FTIR spectroscopy, Thermochimica Acta, 552, 123-130. doi: http://dx.doi.org/10.1016/j.tca.2012.11.002
Cho, D. H., Yu, W. R., Youk, J. H., Yoo, J. H., (2007). Formation of Micro-Crystals in Poly(Ethylene Terephthalate) Fiber by A Short Heat Treatment and Their Influence on the Mechanical http://dx.doi.org/10.1016/j.eurpolymj.2007.05.036 European Polymer Journal, 43(8), 3562-3572. doi:
Costa, L., Luda, M. P., Trossarelli, L., Brach del Prever, E. M., Crova M., Gallinaro P., (1998). Oxidation in Orthopaedic UHMWPE Sterilized by Gamma-Radiation and Ethylene Oxide, Biomaterials, 19(7-9), 659-668. doi:10.1016/S0142-9612(97)00160-9
Darmanin, T., Guittard, F., (2013). Wettability of Conducting Polymers: From Superhydrophilicity to Superoleophobicity, Progress in Polymer Science, 39, 656-682. doi: 10.1016/j.progpolymsci.2013.10.003
De Clerck, K., Rahier, H., Van Mele, B., Kiekens, P., (2003). Thermal Properties Relevant to the Processing of PET Fibers, J Appl Polym Sci, 89, 3840-3849. doi:10.1002/app.12543
Deitzel, J. M, Kleinmeyer, J., Harris, D., Tan, N. C. B., (2001). The Effect of Processing Variables on the Morphology of Electrospun Nanofibers and Textiles, Polymer, 42, 261- 272. doi: 10.1007/s11595-012-0438-y
Dimitrievska, S., Petit, A., Doillon, C. J., Epure, L., Ajji, A., Yahia, L., Bureau, M. N., (2011). Effect of Sterilization on Non-Woven Polyethylene Terephthalate Fiber Structures for Vascular Grafts. Macromol Biosci, 11,13-21. doi: 10.1002/mabi.201000268
Doshi, J., Reneker D. H., (1993). Electrospinning Process and Application of Electrospun Fibers, J Electrostat, 35, 151-160. doi: 10.1109/IAS.1993.299067
Duzyer, S., Hockenberger, A., Zussman, E., (2011). Characterization of Solvent-Spun Polyester Nanofibers, J App Polym Sci, 120, 759-769. doi: 10.1002/app.33092
Fong, H., Chun, I., Reneker, D. H., (1999). Beaded Nanofibers Formed During Electrospinning, 3861(99)00068-3 40, 4585-4592. doi: http://dx.doi.org/10.1016/S0032
Greenfeld, I., Zussman, E., (2013). Polymer Entanglement Loss in Extensional Flow: Evidence From Electrospun Short Nanofibers, J Polym Sci Part B:Polymer Physics, 51, 1377-1391. doi: 10.1002/polb.23345
Greiner, A., Wendorrf, J. H., (2007). Electrospinning: A Fascinating Method for the Preparation of Ultrathin Fibers, Angew Chem Int Ed, 46, 5670-5703. doi: 10.1002/anie.200604646
Hayashi, N., Guan, W., Tsutsui, S., Tomari, T., Hanada, Y., (2006). Sterilization of Medical Equipment Using Radicals Produced by Oxygen/Water Vapor RF Plasma, Jpn J Appl Phys, 45, 8358-8363. doi:10.1143/JJAP.45.8358
Heydarkhan-Hagvall, S., Schenke-Layland, K., Dhanasopon, A. P., Rofail, F., Smith, H., Wu, B. M., Shemin, R., Beygui, R E., MacLellan, W. R., (2008). Three-Dimensional electrospun ECM-based hybrid scaffolds for Cardiovascular Tissue Engineering , Biomaterials, 29, 2907 -2914. doi: http://dx.doi.org/10.1016/j.biomaterials.2008.03.034
Holy, C. E., Cheng, C., Davies, J. E., Shoichet, M. S., (2000). Optimizing the Sterilization of PLGA Scaffolds for Use in Tissue Engineering, Biomaterials, 22, 25-31. doi: 10.1016/S0142-9612(00)00136-8
Huang, Z. M., Zhang, Y. Z., Kotaki, M., Ramakrishna,. S., (2003). A Review on Polymer Nanofibers by Electrospinning and Their Applications in Nanocomposites, Composites Science and Technology, 63, 2223-2253. doi: 10.1016/S0266-3538(03)00178-7
Khansari, S., Duzyer, S., Sinha-Ray, S., Hockenberger, A., Yarin, A. L., Pourdeyhimi, B., (2013). Two-Stage Desorption-Controlled Release of Fluorescent Dye and Vitamin From Solution-Blown and Electrospun Nanofiber Mats Containing Porogens, Mol Pharm, 10 4509-4526. doi: 10.1021/mp4003442
Li, C., Vepari, C., Jina, H. J., Kima, H. J, Kaplan, D. L., (2006). Electrospun Silkbmp-2 Scaffolds http://dx.doi.org/10.1016/j.biomaterials.2006.01.022 Tissue Engineering Biomaterials, 27, 3115-3124. doi:
Lopes-da-Silva, J. A., Veleirinho, B., Delgadillo, I., (2009). Preparation and Characterization of Electrospun Mats Made of PET/Chitosan Hybrid Nanofibers. J Nanosci Nanotechnol, 9, 3798-3804. doi: https://doi.org/10.1166/jnn.2009.NS70
Marreco, P. R., Moreira, P., Genari, S. C., Moraes, A. M., (2004). Effects of Different Sterilization Methods on the Morphology, Mechanical Properties and Cytotoxicity of Chitosan Membranes Used as Wound Dressings. , J Biomed Mater Res B Appl Biomater, 71, 268-277. doi: 10.1002/jbm.b.30081
Mendes, G. C. C., Brandão, T. R. S., Silva, C. L. M., (2007). Etylene Oxide Sterilization of Medical doi: http://dx.doi.org/10.1016/j.ajic.2006.10.014 American Journal of Infection Control, 35, 574-581.
Nair, P. D., Sreenivasan K., (1984). Effect of Steam Sterilization on Polyethylene Terephthalate, Biomaterials, 5, 305-306. doi: 10.1016/0142-9612(84)90079-6
Nair, P.D., (1995). Currently Practised Sterilization Methods--Some inadvertent Consequences. J Biomater Appl, 10, 121-135. doi:10.1177/088532829501000203
Rai, R., Tallawi, M., Roether, J. A., Detsch, R., Barbani, N., Rosellini, E., Kaschta, J., Schubert, D. W., Boccaccini, A. R., (2013). Sterilization Effects on The Physical Properties and Cytotoxicity of Poly (Glycerol Sebacate), Materials Letters, 105, 32-35. doi: http://dx.doi.org/10.1016/j.matlet.2013.04.024
Rutala, W. A., Weber, D. J., (2001). New Disinfection and Sterilization Methods, Emerg Infect Dis, 7, 348 -353. doi: 10.3201/eid0702.700348
Shenoy, S. L., Bates, W. D., Frisch, H. L., Wnek, G. E., (2005). Role of Chain Entanglements on Fiber Formation During Electrospinning of Polymer Solutions: Good Solvent, Non-Specific Polymer-Polymer İnteraction Limit, Polymer, 46, 3372-384. doi: 10.1016/j.polymer.2005.03.011
Sill, T. J., Recum, H A, (2008). Electrospinning: Applications in Drug Delivery and Tissue Engineering, Biomaterials, 29, 1989-2006. doi:10.1016/j.biomaterials.2008.01.011
Tan, S. H., Inai, R., Kotaki, M., Ramakrishna, S., (2005). Systematic Parameter Study for Ultra-Fine Fiber Fabrication via Electrospinning Process, Polymer, 46, 6128-6134. doi: http://dx.doi.org/10.1016/j.polymer.2005.05.068
Theron, S. A., Zussman, E., Yarin, A. L., (2004). Experimental Investigation of the Governing Parameters in The Electrospinning of Polymer Solutions, Polymer, 45, 2017- 2030. doi: 10.1016/j.polymer.2004.01.024
Thompson, C. J., Chase, G. G., Yarin, A. L., Reneker, D. H. (2007). Effects of Parameters on Nanofiber Diameter Determined from Electrospinning Model, Polymer, 48, 6913-6922. doi: http://dx.doi.org/10.1016/j.polymer.2007.09.017
Weiss, P., Lapkowski, M., Legeros, R. Z., Bouler, J. M., Jean, A., Daculsi, G., (1997). FTIR Spectroscopic Study of an Organic/Mineral Composite for Bone and Dental Substitute Materials, Journal of Materials Science: Materials in Medicine, 8,621-629. doi: 10.1023/A:1018519419539
Yang, F., Both, S. K., Yang, X., Walboomers, X. F., Jansen, J.A. (2009). Development of an Electrospun Nano-Apatite/PCL Composite Membrane for GTR/GBR Application, Acta Biomaterialia, 5, 3295-3304. doi: 10.1016/j.actbio.2009.05.023
Yoshimoto, H., Shin, Y. M., Terai, H., Vacanti, J. P. (2003). A Biodegradable Nanofiber Scaffold by Electrospinning and its Potential for Bone Tissue Engineering, Biomaterials, 24, 2077-2082. doi: http://dx.doi.org/10.1016/S0142-9612(02)00635-X
Zong, X., Bien, H., Chung, C. Y., Yin, L., Fang, D., Hsiao, B. S., Chu, B., Entcheva, E. (2005). Electrospun Fine-Textured Scaffolds for Heart Tissue Constructs, Biomaterials, 26, 5330-5338. doi: 10.1016/j.biomaterials.2005.01.052