___

• 1.Dimarogonas, A.D. (1996). Vibration of cracked structures: a state of the art review. Engineering Fracture Mechanics, 55(5): 831-857. 2. Dimarogonas, A.D. and Paipetis, S.A. (1983). Analytical Methods in Rotor Dynamics, Applied Science Publisher, London. 3. Shifrin, E.I. and Ruotolo, R.. (1999). Natural frequencies of a beam with an arbitrary number of cracks. Journal of Sound and Vibration, 222(3): 409-423. 4. Lin, H.P., Chang, S.C. and Wu, J.D. (2002). Beam vibrations with an arbitrary number of cracks. Journal of Sound and Vibration, 258(5): 987-999. 5. Zheng, D.Y. and Fan, S.C. (2003). Vibration and stability of cracked hollow-sectional beams. Journal of Sound and Vibration, 267: 933-954. 6. Lin, H.P. (2004). Direct and inverse methods on free vibration analysis of simply supported beams with a crack. Engineering Structures, 26: 427–436. 7. Loya, J.A., Rubio, L. and Fernández-Sáez, J. (2006). Natural frequencies for bending vibrations of Timoshenko cracked beams. Journal of Sound and Vibration, 290: 640-653. 8. Attar, M. (2012). A transfer matrix method for free vibration analysis and crack identification of stepped beams with multiple edge cracks and different boundary conditions. International Journal of Mechanical Sciences, 57: 19-33. 9. Viola, E., Ricci, P. and Aliabadi, M.H. (2007). Free vibration analysis of axially loaded cracked Timoshenko beam structures using the dynamic stiffness method. Journal of Sound and Vibration, 304: 124-153. 10. Ruotolo, R. and Surace, C. (2004). Natural frequencies of a bar with multiple cracks. Journal of Sound and Vibration, 272: 301-316. 11. Lee, J. (2009). Identification of multiple cracks in a beam using natural frequencies. Journal of Sound and Vibration, 320: 482-490. 12. Nandakumar, P. and Shankar, K. (2014). Multiple crack damage detection of structures using the two-crack transfer matrix. Structural Health Monitoring, 13(5): 548–561. 13.Neves, A.C., Simões, F.M.F. and Pinto da Costa, A. (2016). Vibrations of cracked beams: Discrete mass and stiffness models. Computers and Structures, 168: 68–77. 14. Sinha, J.K., Friswell, M.I. and Edwards, S. (2002). Simplified models for the location of cracks in beam structure using measured vibration data, Journal of Sound and Vibration, 251: 13-38. 15. Patil, D.P. and Maiti, S.K. (2005). Experimental verification of a method of detection of multiple cracks in beams based on frequency measurements. Journal of Sound and Vibration, 281: 439-451. 16.Nandakumar, P. and Shankar, K. (2015). Structural crack damage detection using transfer matrix and state vector. Measurement, 68: 310–327. 17. PULSE (2006). Analyzers and Solutions, Release 11.2. Bruel and Kjaer, Sound and Vibration Measurement A/S, Denmark. 18.OMA (2006). Operational Modal Analysis, Release 4.0. Structural Vibration Solution A/S, Denmark. 19. Ewins, D.J. (1995). Modal Testing: Theory and Practice, John Wiley & Sons, Inc, New York.