BALL BURNISHING PROCESS EFFECTS ON SURFACE ROUHGNESS FOR Al 6013 ALLOY

Ball burnishing process rapidly developing and applied in many applications. The process'sadvantageous aspects on the material increase the quality of the productsurface. In this study, a surface quality research was made on 6013 series of aluminum alloys which are used frequently in the industry. As a result of the experiments, it was seen that the ball burnishing process increased the surface qualities extremely. At the same time, the results obtained were mathematically analyzed.

PDF

___

Aldas, K., I. Ozkul and A. Akkurt (2014). "Modelling surface roughness in WEDM process using ANFIS method." Journal of the Balkan Tribological Association Vol, Vol. 20, No. 4, pp. 548-558.
Arbizu, I. P. and C. L. Perez (2003). "Surface roughness prediction by factorial design of experiments in turning processes." Journal of Materials Processing Technology, Vol. 143, No., pp. 390-396.
Buldum, B. and S. Cagan (2017). "Study of Ball Burnishing Process on the Surface Roughness and Microhardness of AZ91D Alloy." Experimental Techniques, Vol., No., pp. 1-9.
Buldum, B. B. and S. C. Cagan (2017). "The optimization of surface roughness of AZ91D magnesium alloy using ANOVA in ball burnishing process." Turkish Journal of Engineering, Vol. 1, No. 1, pp. 25.
Gaitonde, V., S. Karnik and J. P. Davim (2016). Multiple performance optimization in drilling using Taguchi method with utility and modified utility concepts. Elsevier, USA.
Miller, W., L. Zhuang, J. Bottema, A. J. Wittebrood, P. De Smet, A. Haszler and A. Vieregge (2000). "Recent development in aluminium alloys for the automotive industry." Materials Science and Engineering: A, Vol. 280, No. 1, pp. 37-49.
Nouari, M., G. List, F. Girot and D. Coupard (2003). "Experimental analysis and optimisation of tool wear in dry machining of aluminium alloys." Wear, Vol. 255, No. 7-12, pp. 1359-1368.
Pavani, P., R. P. Rao and S. Srikiran (2015). "Performance evaluation and optimization of nano boric acid powder weight percentage mixed with vegetable oil using the Taguchi approach." Journal of Mechanical Science and Technology, Vol. 29, No. 11, pp. 4877-4883.
Pedersen, S. N., M. E. Christensen and T. J. Howard (2016). "Robust design requirements specification: a quantitative method for requirements development using quality loss functions." Journal of Engineering Design, Vol. 27, No. 8, pp. 544-567.
Ugurlu, M., S. C. Cagan and B. B. Buldum (2017). "Improvement of surface roughness using ANOVA for AZ31B magnesium alloy with ball burnishing process." Int J Engine Res Technol, Vol. 6, No. 9, pp. 216-221.