The optimization of a projectile from a three-coil reluctance launcher

This paper presents the design of a 3-coil reluctance launcher system and realization of an experimental prototype. A Maxwell model of the system was constructed and finite elements analysis (FEA) was applied before building the experimental prototype. The effect of variations in projectile parameters (such as material and length of the projectile) on projectile velocity was studied using the model. Then the experimental prototype of the launcher system was built. A velocity measurement system was also designed and implemented to measure the muzzle velocity of the launched projectiles. A total of 9 projectiles of 3 different sizes made of 3 different materials were constructed to be launched by the system. Each projectile was launched via capacitors charged with DC voltage between 50 and 200 V and the muzzle velocities were measured. Finally, the effects of projectile material and projectile length on muzzle velocity and launcher efficiency were examined. In this study, an easy-to-use, low-cost, portable, and structurally simple reluctance launcher that can be operated in relatively low voltage levels was implemented. Theoretical and experimental results were compared and it is concluded that the results are consistent with each other.

PDF

___

[1] Bresie DA, Andrews JA. Design of a reluctance accelerator. IEEE T Magn 1991; 27: 623-627.
[2] Tomczuk B, Sobol M. Field analysis of the magnetic systems for tubular linear reluctance motors. IEEE T Magn 2005; 41: 1300-1305.
[3] Dursun M, Ko¸c F. Linear switched reluctance motor control with PIC18F452 microcontroller. Turk J Elec Eng & Comp Sci 2013; 21: 1107-1119.
[4] Barhoumi EM, Hajji M, Salah BB. Design of a double-stator linear switched reluctance motor for shunting railway channels. Turk J Elec Eng & Comp Sci 2014; 22: 302-314.
[5] Waindok A, Mazur G. Mutual inductances in a mathematical model of the three-stage reluctance accelerator. In: 3rd International Students Conference on Electrodynamics and Mechatronics; 0608 October 2011; Opole, Poland. New York, NY, USA: IEEE. pp. 115-118.
[6] Bayati MS, Keshtkar A, Gharib L. Analyzing the near and far field using finite difference and finite element method. IEEE T Plasma Sci 2013; 41: 1398-1402.
[7] McNab IR, Stefani F, Crawford M, Erengil M, Persad C, Satapathy S, Vanicek H, Watt T, Dampier C. Development of a naval railgun. IEEE T Magn 2005; 41: 206-210.
[8] Marder B. A coilgun design primer. IEEE T Magn 1993; 29: 701-705.
[9] Kim SW, Jung HK, Hahn SY. An optimal design of capacitor-driven coilgun. IEEE T Magn 1994; 30: 207-211.
[10] Kalender O. The optimization of launching a bullet using electromagnetic energy. PhD, Gazi University, Ankara, Turkey, 2005.
[11] Kaye RJ. Operational requirements and issues for coilgun electromagnetic launchers. IEEE T Magn 2005; 41: 194-199.
[12] Zhang C, Dong P, Duan X, Li S, Li Z, Zhang G. Analysis of reluctance coil launcher performance using coupled field-circuit method. In: International Conference on Electrical Machines and Systems; 1720 October 2008; Wuhan, China. New York, NY, USA: IEEE. pp. 4049-4052.
[13] Slade GW. A simple unified physical model for a reluctance accelerator. IEEE T Magn 2005; 41: 4270-4276.
[14] Yadong Z, Ying W, Jiangjun R. Capacitor-driven coil-gun scaling relationships. IEEE T Plasma Sci 2011; 39: 220-224.
[15] Hou Y, Liu Z, Ouyang JM, Yang D. Parameter settings of the projectile of the coil electromagnetic launcher. 16th International Symposium on Electromagnetic Launch Technology; 1519 May 2012; Beijing, China. New York, NY, USA: IEEE. pp. 1-4.
[16] Sen PC. Principles of Electric Machines and Power Electronics. New York, NY, USA: Wiley, 1989.
[17] Mosallanejad A, Shoulaie A. A novel structure to enhance magnetic force and velocity in tubular linear reluctance motor. Turk J Elec Eng & Comp Sci 2012; 20: 1063-1076.
[18] Ulaby FT, Michielssen E, Ravaioli U. Fundamentals of Applied Electromagnetics. 6th ed. Upper Saddle River, NJ, USA: Prentice Hall, 2010.
[19] Topba¸s MA. Steel and Heat Treatment Handbook. ˙Istanbul, Turkey: Prestij Press, 1998.
[20] Daldaban F, Ustkoyuncu N. Inductance estimating of linear switched reluctance motors with the use of adaptive neuro-fuzzy inference systems. Gazi University Journal of Science 2009; 22: 89-96.
[21] Ziegenbein J. Magnetic Clamping Structures for the Consolidation of Composite Laminates. Msc, Georgia Institute of Technology, Atlanta, GA, USA, 2011.
[22] Li F, Li X, Zhu T, Rong Y. Numerical simulation of the moving induction heating process with magnetic flux concentrator. Advances in Mechanical Engineering 2013; 2013: 1-9.
[23] An J, Kwon DS. Modeling of a magnetorheological actuator including magnetic hysteresis. Journal of Intelligent Material Systems and Structures 2003; 14: 541-550.
[24] Xiang H, Lei B, Li Z, Zhao K. Design and experiment of reluctance electromagnetic launcher with new-style armature. IEEE T Plasma Sci 2013; 41: 1066-1069.