Investigation on optimal parameter selection for LLC half-bridge resonant converter based on FHA

Investigation on optimal parameter selection for LLC half-bridge resonant converter based on FHA

The LLC half-bridge resonant converter has attracted extensive research attention due to its advantagesof achieving high efficiency and high power density. However, the resonant process is more complicated, where themain difficulty is to precisely calculate resonant parameters. In this paper, the fundamental harmonic approximation(FHA) method is employed to analyze the resonant process of the converter. In particular, the working mode and themathematical model of the LLC half-bridge resonant converter are established, where a new method is proposed todetermine the operating frequency of LLC based on voltage gain and transformer loss. Based on the proposed method,the converter parameters can be optimized and the drawbacks of manually selecting the frequency can be avoided.Finally, a 200-W LLC converter laboratory prototype is established and the experimental results verify the effects ofparameter optimization.

___

  • [1] Hu ZY, Qiu YJ, Wang LI, Liu YF. An interleaved LLC resonant converter operating at constant switching frequency. IEEE T Power Electr 2014; 29: 2931-2944.
  • [2] Lee JB, Kim JK, Kim JH, Baek JI, Moon GW. A high-efficiency PFM half-bridge converter utilizing a half-bridge LLC converter under light load conditions. IEEE T Power Electr 2015; 30: 4931-4943.
  • [3] Beiranvand R, Rashidian B, Zolghadri MR, Alavi SMH. A design procedure for optimizing the LLC resonant converter as a wide output range voltage source. IEEE T Power Electr 2012; 27: 3749-3764.
  • [4] Yu RY, Ho GKY, Pong BMH, Ling BWK, Lam J. Computer-aided design and optimization of high-efficiency LLC series resonant converter. IEEE T Power Electr 2012; 27: 3243-3257.
  • [5] Wang CF, Xu QC. Study of LLC resonant converter for variable-frequence microwave oven power supply. Transactions of China Electrotechnical Society 2012; 27: 103-110 (in Chinese with English abstract).
  • [6] Yuan YS, Luo F, Hu PA. One bridge-type secondary-side LLC resonant DC-DC converter. Proceedings of the CSEE 2014; 34: 6415-6426 (in Chinese with English abstract).
  • [7] Zheng RC, Liu BY, Duan SX. Analysis and parameter optimization of start-up process for LLC resonant converter. IEEE T Power Electr 2015; 30: 7113-7123.
  • [8] Beiranvand R, Rashidian B, Zolghadri MR, Alavi SMH. Optimizing the normalized dead-time and maximum switching frequency of a wide-adjustable-range LLC resonant converter. IEEE T Power Electr 2011; 26: 462-472.
  • [9] Fang X, Hu HB, Chen F, Somani U, Auadisian E, Shen J, Batarseh I. Efficiency-oriented optimal design of the LLC resonant converter based on peak gain placement. IEEE T Power Electr 2013; 28: 2285-2296.
  • [10] Fang X, Hu HB, Chen F, Somani U, Auadisian E, Shen J, Batarseh I. Operation mode analysis and peak gain approximation of the LLC resonant converter. IEEE T Power Electr 2012; 27: 1985-1995.
  • [11] Ivensky G, Bronshtein S, Abramovitz A. Approximate analysis of resonant LLC DC-DC converter. IEEE T Power Electr 2011; 26: 3274-3284.
  • [12] Lo YK, Lin CY, Hsieh MT, Lin CY. Phase-shifted full-bridge series-resonant DC-DC converters for wide load variations. IEEE T Ind Electron 2011; 58: 2572-2575.
  • [13] Shafiei N, Ordonez M, Craciun M, Botting C, Edington M. Burst mode elimination in high power LLC resonant battery charger for electric vehicles. IEEE T Power Electr 2016; 31: 1173-1188.
  • [14] Wang HL, Chen Y, Liu YF, Afsharian J, Yang JH. A passive current sharing method with common inductor multiphase LLC resonant converter. IEEE T Power Electr 2017; 32: 6994-7010.