Investigation of the computational speed of Laguerre network-based MPC in the thermal control of energy-efficient buildings

The design of computationally efficient model predictive control (MPC) systems for the thermal control of buildings is a challenging task since long prediction horizons may be needed, which can take a signi cant computational time, especially when multizone buildings are considered. In this paper, we investigate the computational performance of a potential approach for this purpose, Laguerre network-based MPC (LN-MPC), for thermal control of buildings, where parameterization of control input over the prediction horizon is used to reduce the number of decision variables. The computational performance of the suggested framework with comparison to the classical MPC framework is investigated through a detailed case study. It was observed that although LN-MPC can produce almost the same results as the classical MPC with a considerably smaller number of decision variables, it has no computational advantage. The potential reasons behind the lack of improvement in the computational performance of LN-MPC are also discussed.

PDF

___

[1] Reid EM, Toffel MV. Responding to public and private politics: corporate disclosure of climate change strategies. Strateg Manage J 2009; 30; 1157-1178.
[2] Dixit MK, Fernandez-Solis JL, Lavy S, Culp CH. Identi cation of parameters for embodied energy measurement: a literature review. Energ and Buildings 2010; 42: 1238-1247.
[3] Freire R, Oliveira G, Mendes, N. Predictive controllers for thermal comfort optimization and energy savings. Energ and Buildings 2008; 40: 1353-1365.
[4] Martin RM, Federspiel C, Auslander D. Supervisory control for energy savings and thermal comfort in commercial building HVAC systems. In: Proceedings of the AAAI spring symposium on information re nement and revision for decision making: modeling for diagnostics, prognostics, and prediction; March 2002, Stanford University.
[5] Atam E, Helsen L. Control-oriented thermal modeling of multi-zone buildings: Methods and issues. IEEE Contr Syst Mag 2016; 36: 86-111.
[6] Atam E. New paths toward energy-efficient buildings: A multiaspect discussion of advanced model-based control. IEEE Industrial Electronics Magazine 2016; 10: 50-66.
[7] Dong B, Lam KH. A real-time model predictive control for building heating and cooling systems based on the occupancy behavior pattern detection and local weather forecasting. Building Simulation 2014; 7: 89-106.
[8] Privara S, Siroky J, Ferkl L, Cigler J. Model predictive control of a building heating system: the rst experience. Energ and Buildings 2011; 43: 564-572.
[9] Atam E, Helsen L. Optimal control approaches for analysis of energy use minimization of hybrid ground-coupled heat pump systems. IEEE T Contr Syst T 2016; 24: 525-540.
[10] Atam E, Helsen L. A convex approach to a class of non-convex building hvac control problems: illustration by two case studies. Energ and Buildings 2015; 93: 269-281.
[11] Atam E. Decentralized thermal modeling of multi-zone buildings for control applications and investigation of submodeling error propagation. Energ and Buildings 2016; 126: 384-395.
[12] Wahlbergand B, Makila PM. On approximation of stable linear dynamical systems using Laguerre and Kautz functions. Automatica 1996; 32: 693-708.
[13] Wang L. Model predictive control system design and implementation using MATLAB. Berlin, Germany: Springer- Verlag, 2009.
[14] Adegas F, Wisniewski W, Larsen L. Gain-scheduled model predictive control of wind turbines using Laguerre functions. Proceedings of American Control Conference 2013, Washington D.C., USA (2013), pp. 653-658.
[15] Oliveira GHC, Amaral WC, Favier G, Dumont GA. Constrained robust predictive controller for uncertain processes modelled by orthonormal series functions. Automatica 2000; 36: 563-571.
[16] Sturzenegger D, Gyalistras D, Semeraro V, Morari M, Smith RS. BRCM MATLAB toolbox: model generation for model predictive building control. In: Proc. American Control Conf; 4{6 June 2014; Portland, OR, USA: pp. 1063-1069.
[17] Crawley DB, Lawrie LK, Pedersen CO, Winkelmann FC. EnergyPlus: energy simulation program. ASHRAE Journal 2000; 42: 49-56.
[18] Klein SA, Beckman WA, Mitchell JW, Duffie JA, Duffie NA, Freeman TL, Mitchell JC, Braun JE, Evans BL, Kummer JP et al. TRNSYS 17: A TRaNsient SYstem simulation program. Solar energy laboratory, University of Wisconsin, Madison, USA, 2010.
[19] Verhaegen M, Verdult V. Filtering and system identi cation: a least-squares approach. Cambridge, UK: Cambridge University Press, 2007.
[20] Lofberg J. YALMIP: a toolbox for modelling and optimization in MATLAB. In: IEEE International Symposium on Computer Aided Control Systems Design: 2{4 September 2014; New Orleans, LA, USA: pp. 284-289.