Khaled HALBAOUI, Djamel DIFI, Djamel BOUKHETALA

Hybrid control of five-phase permanent magnet synchronous machine using space vector modulation

This paper aims to study the hybrid control of a five-phase permanent-magnet synchronous machine improvedby the space vector modulation (SVM) technique. The torque ripples and currents will therefore be reduced. This controlis based on the theory of hybrid dynamic systems (HDS), its discrete component is the voltage inverter which has afinite number of states controlling the continuous component that represents the machine. The results of the simulationmade on MATLAB/Simulink are presented and discussed in order to check the performance of the strategy of thestudied control. They show, in particular, the main advantages of this control manifesting the good dynamic of theelectromagnetic torque and the robustness against the parametric variations.

PDF

___

[1] Arahal MR, Barrero F, Toral S, Duran M, Gregor R. Multi-phase current control using finite-state model-predictive control. Control Engineering Practice 2009; 17: 579-587.
[2] Iqbal A, Singh GK, Pant V. Some observations on no-load losses of an asymmetrical six-phase synchronous machine. Turk J Elec Eng & Comp Sci 2016; 24: 4497-4507.
[3] Abjadi NR. Sliding-mode control of a six-phase series/parallel connected two induction motors drive. ISA Transactions 2014; 53: 1847-1856.
[4] Hosseyni A, Trabelsi R, Mimouni MF, Iqbal A, Alammari R. Sensorless sliding mode observer for a five-phase permanent magnet synchronous motor drive. ISA Transactions 2015; 58: 462-473.
[5] Iqbal A, Singh GK, Pant V. Stability analysis of an asymmetrical six-phase synchronous motor. Turk J Elec Eng & Comp Sci 2016; 24: 1674-1692.
[6] Barik SK, Jaladi KK. Five-phase induction motor DTC-SVM scheme with PI controller and ANN controller. Procedia Technology 2016; 25: 816-823
[7] Wang X, Wang Z, Xu Z. A hybrid direct torque control scheme for dual three-phase PMSM drives with improved operation performance. IEEE Transactions on Power Electronics 2018; 63: 321-333.
[8] Echeikh H, Trabelsi R, Iqbal A, Bianchi N, Mimouni MF. Non-linear control of five-phase IM drive at low speed conditions–experimental implementation. ISA Transactions 2016; 65: 244-253
[9] Bermudez M, Gomozov O, Kestelyn X, Barrero F, Nguyen NK, Semail E. Model predictive optimal control considering current and voltage limitations: real-time validation using OPAL-RT technologies and five-phase permanent magnet synchronous machines. Mathematics and Computers in Simulation 2018; 63: 321-333.
[10] Hosseyni A, Trabelsi R, Iqbal A, Mimouni MF. Comparative study of adaptive sliding mode and resonant controllers in fault tolerant five-phase permanent magnet synchronous motor drive. The International Journal of Advanced Manufacturing Technology 2018; 96: 2195-2213.
[11] Arahal MR, Barrero F, Durán MJ, Ortega MG, Martín C. Trade-offs analysis in predictive current control of multi-phase induction machines. Control Engineering Practice 2018; 81: 105-113.
[12] Semail E. Multi-phase electrical drives: Towards a System Approach. Report of the Habilitation to Directing Researches, Lille University of Science and Technologie, Lille, France, 2009.
[13] Crévits Y. Characterization and control of multiphase drives under fault supply conditions. PhD thesis, University of Lille, Lille, France, 2010.
[14] Khedher A, Mimouni MF. Sensorless-adaptive DTC of double star induction motor. Energy Conversion and Management 2010; 51: 2878-2892.
[15] Arahal MR, Duran MJ. PI tuning of five-phase drives with third harmonic injection. Control Engineering Practice 2009; 17: 787-797.
[16] Boudjema Z, Taleb R, Djeriri Y, Yahdou A. A novel direct torque control using second order continuous sliding mode of a doubly fed induction generator for a wind energy conversion system. Turk J Elec Eng & Comp Sci 2017; 25: 965-975.
[17] Ouassaid M, Elyaalaoui K, Cherkaoui M. Sliding mode control of induction generator wind turbine connected to the grid. Advances and Applications in Nonlinear Control Systems 2016; 635:531-553
[18] Monmasson E, Louis JP. Presentation of a control law for IM drive based on the dynamic reconfiguration of a DTC algorithm and a SVM-DTC algorithm. Mathematics and Computers in Simulation 2003; 63: 321-333.
[19] Ammar A, Benakcha A, Bourek A. Closed loop torque SVM-DTC based on robust super twisting speed controller for induction motor drive with efficiency optimization. International Journal of Hydrogen Energy 2017; 42: 17940-17952
[20] Pimkumwong N, Wang MS. Full-order observer for direct torque control of induction motor based on constant V/F control technique. ISA Transactions 2018; 73: 189-200.
[21] Mesloub H, Boumaaraf R, Benchouia MT, Goléa A, Goléa N, Srairi K. Comparative study of conventional DTC and DTC SVM based control of PMSM motor - simulation and experimental results. Mathematics and Computers in Simulation 2018; 63: 321–333.
[22] Morel F, Retif JM, Lin-Shi X, Valentin C. Permanent magnet synchronous machine hybrid torque control. IEEE transactions on industrial electronics 2008; 55: 501-511.
[23] Lin-Shi X, Morel F, Llor A, Allard B, Rétif JM. Implementation of hybrid control for motor drives. IEEE Transactions on Ind Electronis 2007; 54: 1946-1952.
[24] Lin-Shi X . Control of energy conversion systems. Habilitation to Directing Researches. National Institution of Applied Sciences of Lyon, Lyon, France 2007.
[25] Morel F, Lin-Shi X, Rétif JM, Allard B.A predictive current control applied to a permanent magnet synchronous machine, comparison with a classical direct torque control. Electric Power Systems 2008; 78: 1437-1447.
[26] Retif JM, Lin-Shi X, Llor AM, Morand F. New hybrid direct-torque control for a winding rotor synchronous machine. In: IEEE 2004 Power Electronics Specialists Conference; 20-25 June 2004 ; Aachen, Germany, Germany : IEEE. pp. 1438-1442
[27] Morel F, Rtif JM, Lin-Shi X, LIor AM. Fixed switching frequency hybrid control for a permanent magnet synchronous machine. In: IEEE 2004 International Conference on Industrial Technology; 8-10 Dec 2004 ; Hammamet, Tunisia, Tunisia : IEEE. pp. 127-131
[28] Arichi F, Gorp JV, Djemai M, Defoort M, Cherki B. Hybrid state estimation for a class of switched system using Petri Nets. In: IEEE 2014 European Control Conference; 24-27 June 2014; Strasbourg, France: IEEE. pp. 2534- 2539
[29] Elmetennani S, Laleg-Kirati TM, Djemai M, Tadjine M. New MPPT algorithm for PV applications based on hybrid dynamical approach. Journal of Process Control 2016; 48: 14-24.
[30] Gorp JV, Giua A, Defoort M, Djemaï M. Active diagnosis for switched systems using mealy machine modeling. In: Sayed-Mouchaweh M, editor. Diagnosability, Security and Safety of Hybrid Dynamic and Cyber-Physical Systems. New York, NY, USA : Springer International Publishing, 2018. pp. 147-173
[31] Djondiné P, Barbot JP, Ghanes M. On the Petri nets control of the multicellular converter. International Journal of Emerging Technology and Advanced Engineering 2017; 7: 332-336.
[32] Liu X, Stechlinski P. Switching and impulsive control algorithms for nonlinear hybrid dynamical systems. Nonlinear Analysis: Hybrid Systems 2018; 27: 307–322.
[33] Halbaoui K, Belazreg MF, Boukhetala D, Belhouchat MH. Modeling and predictive control of nonlinear hybrid systems using mixed logical dynamical formalism. In: Vaidyanathan S, Volos C, editors. Advances and Applications in Nonlinear Control Systems. New York, NY, USA : Springer International Publishing, 2016. pp. 421-450
[34] Djondiné P, Barbot JP, Ghanes M. Comparison of sliding mode and petri nets control for multicellular chopper. International Journal of Nonlinear Science 2018; 25: 67-75.
[35] Defoort M, Gorp JV, Djemai M. Multicellular converter: a benchmark for control and observation for hybrid dynamical systems. In: Djemai M, Defoort M, Editors. Hybrid Dynamical Systems. New York, NY, USA : Springer International Publishing, 2015. pp. 293-313
[36] Benmiloud M, Benalia A. Hybrid control scheme for multicellular converter. In: IEEE 2013 International Conference on Control, Decision and Information Technologies (CoDIT); 6-8 May 2013; Hammamet, Tunisia : IEEE. pp. 476- 482.
[37] Benmansour K, Benalia A, Djemai M, Leon J. Hybrid control of a multicellular converter. Nonlinear Analysis: Hybrid Systems 2007; 1: 16–29.
[38] Sellam A, Dehiba B, Benabdallah MB, Abid M, Bouiadjra NB, Bensaid B, Djouhri M. A vectorial modeling for the permanent magnet synchronous machine polyphase based on multimachine approach. International Journal on Electrical Engineering and Informatics 2013; 5: 67-80
[39] Jones M, Satiawan INW. A simple multi-level space vector modulation algorithm for five-phase open-end winding drives. Mathematics and Computers in Simulation 2013: 90: 74–85
[40] Toliyat, HA. Analysis and simulation of multi-phase variable speed induction motor drives under asymmetrical connections. In: IEEE 1996 Applied Power Electronics Conference and Exposition; 3-7 March 1996; San Jose, CA, USA: IEEE. pp. 586-592.
[41] Vizireanu D, Brisset S, Kestelyn X, Brochet P, Miletet Y, Laloy D. Investigation on multi-star structures for large power direct-drive wind generator. Electric Power Components and Systems 2007; 35: 135-152.