Analysis and design of an invisibility cloak based on transformation optics at microwave frequencies

Analysis and design of an invisibility cloak based on transformation optics at microwave frequencies

Invisibility cloaks can be constructed with electromagnetic metamaterials. In this paper, structural meta- materials are used to design an invisibility cloak. To this end, transformation optics is used to design electromagnetic parameters. These parameters are selected so that when we excite the cloak its presence does not perturb radiated elds. Therefore, we formulate the electric eld both at the inner and outer parts of the cloak, when the excitation source is placed both inside and outside, and we show that the scattered elds will be suppressed due to its presence. Finally, simulation results verify that the invisibility cloak is well designed and is able to hide the cylindrical metal inside it.

___

  • [1] Cai W, Shalaev V. Optical Metamaterials: Fundamentals and Applications. New York, NY, USA: Springer, 2010.
  • [2] Leonhardt U. Optical conformal mapping. Science 2006; 312: 1777-1780.
  • [3] Pendry JB, Schurig D, Smith DR. Controlling electromagnetic elds. Science 2006; 312: 1780-1782.
  • [4] Yan W, Yan M, Ruan Z, Qiu M. Coordinate transformations make perfect invisibility cloaks with arbitrary shape. New J Phys 2008; 10: 1-13.
  • [5] Jiang WX, Chin JY, Li Z, Cheng Q, Liu R, Cui TJ. Analytical design of conformally invisible cloaks for arbitrarily shaped objects. Phys Rev E 2008; 77: 1-6.
  • [6] Nicolet A, Zolla F, Guenneau S. Electromagnetic analysis of cylindrical cloaks of an arbitrary cross section. Opt Lett 2008; 33: 1584-1586.
  • [7] Schurig D, Mock J, Justice B, Cummer S, Pendry J, Starr A, Smith D. Metamaterial electromagnetic cloak at microwave frequencies. Science 2006; 314: 977-980.
  • [8] Balanis CA. Advanced Engineering Electromagnetics. 2nd ed. Hoboken, NJ, USA: Wiley, 2012.
  • [9] Chew W. Waves and Fields in Inhomogeneous Media. New York, NY, USA: IEEE Press, 1995.
  • [10] Zhang B, Chen H, Wu B, Luo Y, Ran L, Kong JA. Response of a cylindrical invisibility cloak to electromagnetic waves. Phys Rev B 2007; 76: 12-15.
  • [11] Arslanagic S, Breinbjerg O. Electric-line-source illumination of a circular cylinder of lossless double-negative mate- rial: an investigation of near eld, directivity, and radiation resistance. IEEE Anten Propag M 2006; 48: 38-54.
Turkish Journal of Electrical Engineering and Computer Sciences-Cover
  • ISSN: 1300-0632
  • Yayın Aralığı: 6
  • Yayıncı: TÜBİTAK
Sayıdaki Diğer Makaleler

Design optimization of distribution transformers with nature-inspired metaheuristics: a comparative analysis

Nejat YUMUŞAK, Levent ALHAN

A novel microstrip diplexer design with tunable bandwidths and switchable channels for 4.5G applications

Ali Kürşad GÖRÜR, Elif GÜNTÜRKÜN ŞAHİN, Pınar ÖZTÜRK ÖZDEMİR, Ceyhun KARPUZ

A new video forgery detection approach based on forgery line

Güzin ULUTAŞ, Mustafa Hakan BOZKURT, Isılay BOZKURT

On the design of equal division single-band ltering dividers with an extended transmission line and resistor as isolation elements

Zafar Bedar KHAN, Huiling ZHAO

Optimal reactive power ow in BDFMs for converter cost reduction and efficiency improvement

Hamed GORGINPOUR, Behzad JANDAGHI, Mohammad Naser HASHEMNIA, Hashem ORAEE

A probabilistic scenario-based framework for solving stochastic dynamic economic emission dispatch with unit commitment

Liang QIN, Yachao ZHANG, Kaipei LIU, Xiaobing LIAO, Xueli AN

A novel approach to solve transient stability constrained optimal power ow problems

Huy NGUYEN-DUC, Linh TRAN-HOAI, Dieu VO NGOC

Markovian model for reliability assessment of microgrids considering load transfer restriction

Mohammad ALMUHAINI, Abdulrahman AL-SAKKAF

Calculation of current limiting reactance of hybrid SFCL for low voltage ride-through capability enhancement in DFIG wind farms

Sillawat ROMPHOCHAI, Komsan HONGESOMBUT

Low complexity link level performance prediction for SIMO systems

Alam ZAIB, Shahid KHATTAK, Asif KHAN