Krishnaprasad KSR, Mudasir BASHIR, Sreehari Rao PATRI

An ultralow power, 0.003-mm2 area, voltage to frequency-based smart temperature sensor for 55 ◦C to +125 ◦C with one-point calibration

With the scaling of transistor feature size and increased integration density, power density has increased, resulting in high chip temperature, thus degrading the performance and lifetime of the chip. In this work, an ultralow power smart temperature sensor employing a frequency locked loop technique is developed in 65 nm standard CMOS process. The circuit works on the principle of voltage to frequency conversion, exploiting the thermal dependency of threshold voltage (Vth) of MOS transistors in the subthreshold region. The sensor along with signal conditioning subcircuits has a low power consumption of 1.92 µW, while operating over 55 ◦ C to +125 ◦ C with a conversion rate of 10K samples/s. The output frequency corresponding to temperature has its temperature coefficient insensitive to process variation and therefore requires one-point calibration. Due to the simple signal conditioning circuitry, the sensor consumes an estimated area of 0.003 mm2 . Since the sensor has all its subcircuits working in the subthreshold region, it is suitable for low power applications.

PDF

___

[1] Bakker A. CMOS smart temperature sensorsAn overview. In: Proc. IEEE Sensors; June 2002; 2: pp. 1423-1427.
[2] Pedram M, Nazarian S. Thermal Modeling, Analysis, and Management in VLSI Circuits: Principles and Methods. In: Proceedings of the IEEE; Aug. 2006; 94: pp. 1487-1501.
[3] International technology roadmap for semiconductors (ITRS); http://public.itrs.net/.
[4] Shiang YL, Sylvester D, Blaauw D. An ultra low power 1V, 220nW temperature sensor for passive wireless applications. In: IEEE Custom Integrated Circuits Conference; 2124 Sept. 2008; San Jose, CA, USA: IEEE. pp. 507-510.
[5] Weinstein R. RFID: a technical overview and its application to the enterprise. In: IT Professional; 7 MayJune 2005; pp. 27-33.
[6] Sebastiano F, Breems J, Makinwa KAA, Drago S, Leenaerts DMW, Nauta B. A 1.2-V 10- µW NPN-based temperature sensor in 65-nm CMOS with an inaccuracy of 0.2 o C (3σ) from -70 ◦ C to 125 ◦ C. IEEE J Solid-St Circ 2010; 45: 2591-2601.
[7] Okobiah O, Mohanty SP, Kougianos E. Nano-CMOS thermal sensor design optimization for efficient temperature measurement. Integration 2014; 47: 2195-2203.
[8] Pertijs MAP, Makinwa KAA, Huijsing JH. A CMOS smart temperature sensor with a 3σ inaccuracy of ±0.1 ◦ C from -55 ◦ C to 125 ◦ C. IEEE J Solid-St Circ 2005; 40: 2805-2815.
[9] Ueno K, Asai T, Amemiya Y. Low-power temperature-to-frequency converter consisting of subthreshold CMOS circuits for integrated smart temperature sensors. Sens Actuators, A 2011; 165: 132-137.
[10] Johns DA, Martin K. Analog Integrated Circuit Design. Hoboken, NJ, USA: John Wiley & Sons, 1997. pp. 221-408.
[11] Ituero P, Ayala JL, Vallejo ML. A nanowatt smart temperature sensor for dynamic thermal management. IEEE Sens J 2008; 8: 2036-2043.
[12] Chen P, Chen CS, Shen YS, Peng YJ. All-digital time-domain smart temperature sensor with an inter-batch inaccuracy of -0.7 ◦ C to +0.6 ◦ C after one-point calibration. IEEE T Circuits-I 2011: 58: 913-920.
[13] Souri K, Chae Y, Makinwa KAA. A CMOS temperature sensor with a voltage-calibrated inaccuracy of 0.15 ◦ C (3σ) from -55 ◦ C to 125 ◦ C. IEEE J Solid-St Circ 2013; 48: 292-301.
[14] Hwang S, Koo J, Kim K, Lee H, Kim C. A 0.008 mm2 500/spl mu/W 469 kS/s frequency-to-digital converter based CMOS temperature sensor with process variation compensation. IEEE T Circuits-I 2013; 60: 2241-2248.