A multifunctional DSTATCOM for power quality improvement

A multifunctional DSTATCOM for power quality improvement

The distribution static compensator (DSTATCOM) is used for various purposes such as load balancing, harmonic rejection, and power factor correction (PFC) in power distribution networks. In unbalanced and polluted power systems, the classic definition of power factor cannot be used for PFC due to the existence of harmonics and negative sequence components in voltage and current waveforms. In this paper, PFC is performed using the IEEE power factor definition for harmonic and unbalanced environments. Moreover, the application of a proportional-resonant (PR) controller is proposed as an effective controller in the stationary frame for DSTATCOM performance improvement. The PR controller is used in the abc-frame for load balancing and is then compared theoretically and by simulation with the conventional PI controller, which has the main drawback of steady-state error when used in the stationary frame. To improve the DSTATCOM structure, an LCL harmonic filter is used as it is advantageous over the L/LC filter in terms of the size of the filter. The proposed DSTATCOM compensates for the disturbances in the source current imposed by nonlinear, unbalanced, and low power factor loads. Simulation results show the capability of the DSTATCOM including the proposed PR controller in improving the power quality of distribution systems.

___

  • [1] Bollen M. Understanding Power Quality Problems: Voltage Sags and Interruptions. New York, NY, USA: IEEE Press, 1999.
  • [2] Moreno-Munoz A. Power Quality: Mitigation Technologies in a Distributed Environment. London, UK: SpringerVerlag, 2007.
  • [3] Ucar M, Ozdemir S, Ozdemir E. A four-leg unified series–parallel active filter system for periodic and non-periodic disturbance compensation. Electr Pow Syst Res 2011; 815: 1132-1143.
  • [4] Chaoui A, Gaubert JP, Krm F. Power quality improvement using DPC controlled three-phase shunt active filter. Electr Pow Syst Res 2010; 806: 657-666.
  • [5] Kale M, Ozdemir E. A new hysteresis band current control technique for a shunt active filter. Turk J Elec Eng & Comp Sci 2015; 23: 654-665.
  • [6] IEEE Std 519. IEEE Recommended Practices and Requirements for Harmonics Control in Electric Power Systems, 1992.
  • [7] IEEE Std 1159. IEEE Recommended Practice for Monitoring Electric Power Quality, 1995.
  • [8] IEEE Std 1531. IEEE Guide for Application and Specification for Harmonic Filters, 2003.
  • [9] Rahbarimagham H, Maali Amirie E, Vahidi B, Babamalek Gharehpetian G, Abedi M. Superior decoupled control of active and reactive power for three-phase voltage source converters. Turk J Elec Eng & Comp Sci 2015; 23: 1025-1039.
  • [10] Mokhtari M, Khazaei J, Nazarpour D, Farsadi M. Interaction analysis of multifunction FACTS and D-FACTS controllers by MRGA. Turk J Elec Eng & Comp Sci 2013; 21: 1685-1702.
  • [11] Anadol MA, Aydın M, Yal¸cın¨oz T. A real-time extraction of active and reactive current using microcontrollers for a multipulse STATCOM. Turk J Elec Eng & Comp Sci 2013; 21: 1044-1060.
  • [12] Jazebi S, Hosseinian SH, Vahidi B. DSTATCOM allocation in distribution networks considering reconfiguration using differential evolution algorithm. Energ Convers Manage 2011; 52: 2777-2783.
  • [13] Valderrabano A, Ramirez JM. DSTATCOM regulation by a fuzzy segmented PI controller. Electr Pow Syst Res 2010; 80: 707-715.
  • [14] Mitra P, and Venayagamoorthy GK. An adaptive control strategy for DSTATCOM applications in an electric ship power system. IEEE Power Electron 2010; 25: 95-104.
  • [15] Singh B, Jayaprakash P, Kumar S, Kothari DP. Implementation of neural-network-controlled three-leg VSC and a transformer as three-phase four-wire DSTATCOM. IEEE Ind Applic 2011; 47: 1892-1901.
  • [16] Arya SR, Singh B. Performance of DSTATCOM using leaky LMS control algorithm. IEEE J Sel Top Power Electron 2013; 1: 104-113.
  • [17] Singh B, Arya SR. Implementation of single phase enhanced phase-locked loop based control algorithm for three phase DSTATCOM. IEEE T Power Deliver 2013; 28: 1516-1524.
  • [18] Selvajyothi K, Janakiraman PA. Analysis and simulation of single phase composite observer for harmonics extraction. In: IEEE 2006 International Conference on Power Electronic Drives and Energy Systems; 12–15 Dec 2006; New Delhi: IEEE. pp. 1-6.
  • [19] Selvajyothi K, Janakiraman PA. Extraction of harmonics using composite observers. IEEE T Power Deliver 2008; 23: 31-40.
  • [20] Singh B, Arya SR. Composite observer-based control algorithm for distribution static compensator in four-wire supply system. IET Power Electron 2013; 6: 251-260.
  • [21] Singh B, Arya SR. Adaptive theory-based improved linear sinusoidal tracer control algorithm for DSTATCOM. IEEE Power Electron 2013; 28: 3768-3778.
  • [22] Mahdianpoor M, Hooshmand R, Ataei M. A new robust approach to multifunctional dynamic voltage restorer implementation for emergency control in distribution systems. IEEE T Power Deliver 2011; 26: 882-890.
  • [23] Emanuel A. Power Definitions and the Physical Mechanism of Power Flow. 1st ed. Chichester, UK: Wiley-IEEE Press, 2010.
  • [24] Bollen MJ. Signal processing of power quality disturbances. Chichester, UK: Wiley-IEEE Press, 2006.
  • [25] Parikshith C, Vinod J. Filter Optimization for Grid Interactive Voltage Source Inverters. IEEE T Ind Electron 2010; 57: 4106-4114.
  • [26] Task Force on Harmonics Modeling & Simulation (co-author). Test Systems for Harmonics Modeling and Simulation. IEEE T Power Deliver 1999; 14: 579-85 (SCI, EI).