Unscented transformation-based probabilistic optimal power flow for modeling the effect of wind power generation

The unprecedented increasing penetration of distributed energy resources, mainly harvesting renewable energies, is a direct result of environmental concerns. These types of energy resources bring about more uncertainties in the power system and, consequently, necessitate probabilistic analyses of the system performance. This paper develops a new approach for probabilistic optimal power flow (P-OPF) by adapting the unscented transformation (UT) method. The heart of the proposed method lies in how to produce the sampling points. Appropriate sample points are chosen to perform the P-OPF with a high degree of accuracy and less computational burden in comparison with the features of other existing methods. Another salient feature of the UT technique is its capability in modeling the correlated uncertain input variables. This attribute is very desirable in the accommodation of wind generations, which likely have a correlation regarding the geographical proximity. In order to examine the performance of the proposed method, 2 case studies are conducted and the results are compared with those of other existing methods, such as Monte Carlo simulation and 2-point estimation methods. The case studies are the Wood and Wollenberg 6-bus and the IEEE 118-bus test systems. A comparison of the results justifies the effectiveness of the proposed method with regards to the accuracy and execution time.

Unscented transformation-based probabilistic optimal power flow for modeling the effect of wind power generation

The unprecedented increasing penetration of distributed energy resources, mainly harvesting renewable energies, is a direct result of environmental concerns. These types of energy resources bring about more uncertainties in the power system and, consequently, necessitate probabilistic analyses of the system performance. This paper develops a new approach for probabilistic optimal power flow (P-OPF) by adapting the unscented transformation (UT) method. The heart of the proposed method lies in how to produce the sampling points. Appropriate sample points are chosen to perform the P-OPF with a high degree of accuracy and less computational burden in comparison with the features of other existing methods. Another salient feature of the UT technique is its capability in modeling the correlated uncertain input variables. This attribute is very desirable in the accommodation of wind generations, which likely have a correlation regarding the geographical proximity. In order to examine the performance of the proposed method, 2 case studies are conducted and the results are compared with those of other existing methods, such as Monte Carlo simulation and 2-point estimation methods. The case studies are the Wood and Wollenberg 6-bus and the IEEE 118-bus test systems. A comparison of the results justifies the effectiveness of the proposed method with regards to the accuracy and execution time.

___

  • M.T. Schilling, A.N. Leite da Silva, R. Billinton, “Bibliography on power system probabilistic analysis (1962-1988)”, IEEE Transactions on Power Systems, Vol. 5, pp. 1–11, 1990.
  • G.L. Vivian, G.T. Heydt, “Stochastic energy dispatch”, IEEE Transactions on Power Apparatus and Systems, Vol. PAS-100, pp. 3221–3227, 1981.
  • A. Schellenberg, W. Rosehart, J.A Guado, “Introduction to cumulant-based probabilistic optimal power flow (POPF)”, IEEE Transactions on Power Systems, Vol. 20, pp. 1184–1186, 2005.
  • A. Schellenberg, W. Rosehart, J. Aguado, “Cumulant-based probabilistic optimal power flow (P-OPF) with Gaussian and gamma distribution”, IEEE Transactions on Power Systems, Vol. 20, pp. 773–781, 2005.
  • E. Rosenblueth, “Point estimation for probability moments”, Proceedings of the National Academic Science, United States of America, Vol. 72, pp. 3812–3814, 1975.
  • J. He, G. Sallfors, “An optimal point estimate method for uncertain studies”, Applied Mathematical Modeling, Vol. 18, pp. 494–499, 1994.
  • H.P .Hong, “An efficient point estimate method for probabilistic analysis”, Reliability Engineering Systems and Safety, Vol. 59, pp. 261–267, 1998.
  • G. Verbic, A. Canizares, “Probabilistic optimal power flow in electricity markets based on a two-point estimate method”, IEEE Transactions on Power Systems, Vol. 21, pp. 1883–1893, 2006.
  • S. Julier, J. Uhlmann, “Unscented filtering and nonlinear estimation”, Proceedings of the IEEE, Vol. 92, pp. 401– 422, 2004.
  • S. Julier, J. Uhlmann, F. Durrant Whyte, “A new method for the nonlinear transformation of means and covariances in filters and estimators”, IEEE Transactions on Automatic Control, Vol. 45, pp. 477–482, 2000.
  • S.J. Julier, “Comprehensive process models for high-speed navigation”, PhD, University of Oxford, UK, 1997.
  • S. Clark, “Autonomous land vehicle navigation using millimeter wave radar”, PhD, University of Sydney, Australia, 19 A. Montobbio, “Sperimentazione ed affinamento di un localizzatore”, BSc, Polytechnic University of Turin, Italy, 19 X. Wang, C.H. Bishop, S.J. Julier, “What’s better, an ensemble of positive/negative pairs or a centered simplex ensemble?”, EGS - AGU - EUG Joint Assembly, 2003.
  • R. Smith, “Navigation of an underwater remote operated vehicle”, University of Oxford, UK, 1995.
  • R. Karki, P. Hu, R. Billinton, “A simplified wind power generation model for reliability evaluation”, IEEE Transactions on Energy Conversion , Vol. 21, pp. 413–418, 2006.
  • W. Chengxu, Z. Yuan, Wind Generation, Beijing, Electrical Power, 2003.
  • The Mathworks Optimization Toolbox. [Online]. Available at http://www.mathworks.com/products/optimization/. R. Zimmeran, E. Murillo-Sanchez, D. Gan, “Mathpower: a MATLAB power system simulation package”, User’s Manual, Power Systems Engineering Research Center, 2006.
  • R. Bo, F. Li, “Probabilistic LMP forecasting considering load uncertainty”, IEEE Transactions on Power Systems, Vol. 24, pp. 1279–1289, 2009.
  • The Nordex Company. [Online]. Available at http://www.nordex-online.com/en.
Turkish Journal of Electrical Engineering and Computer Science-Cover
  • ISSN: 1300-0632
  • Yayın Aralığı: Yılda 6 Sayı
  • Yayıncı: TÜBİTAK