The effect of ultrastructure and moisture content on mechanical parameters of pine wood (Pinus sylvestris L.) upon tensile stress along the grains

Selected mechanical parameters of earlywood and latewood from Pinus sylvestris subjected to tensile stress were measured as a function of moisture content. Microfibril angles (MFAs) to the longitudinal axis of the cell in the S2 layer of tangent cell walls in the same wood samples were also measured. The tensile strength and modulus of elasticity of earlywood were practically independent of its moisture content, while the same parameters of latewood significantly decreased as its moisture content increased in the hygroscopic range. For earlywood, the strain at break was greater the higher its moisture content. For latewood, no notable effect of moisture content on the strain at break was observed. The influence of moisture content on mechanical parameters measured upon tensile stress was proven to be determined by mean MFA values. This influence was the most pronounced for low MFA values, up to about 13°, while for mean MFAs from 13° to 22° the tensile strength and modulus of elasticity were practically constant and independent of moisture content.

The effect of ultrastructure and moisture content on mechanical parameters of pine wood (Pinus sylvestris L.) upon tensile stress along the grains

Selected mechanical parameters of earlywood and latewood from Pinus sylvestris subjected to tensile stress were measured as a function of moisture content. Microfibril angles (MFAs) to the longitudinal axis of the cell in the S2 layer of tangent cell walls in the same wood samples were also measured. The tensile strength and modulus of elasticity of earlywood were practically independent of its moisture content, while the same parameters of latewood significantly decreased as its moisture content increased in the hygroscopic range. For earlywood, the strain at break was greater the higher its moisture content. For latewood, no notable effect of moisture content on the strain at break was observed. The influence of moisture content on mechanical parameters measured upon tensile stress was proven to be determined by mean MFA values. This influence was the most pronounced for low MFA values, up to about 13°, while for mean MFAs from 13° to 22° the tensile strength and modulus of elasticity were practically constant and independent of moisture content.

___

  • Abe H, Ohtani J, Fukazawa K (1992). Microfibrillar orientation of the innermost surface of conifer tracheid walls. IAWA Bull 13: 411–417.
  • Anagnost SE, Mark RE, Hanna RB (2002). Variation of microfibril angle within individual tracheids. Wood Fiber Sci 34: 337–349.
  • Barnett JR, Bonham VA (2004). Cellulose microfibril angle in the cell wall of wood fibers. Biol Rev Camb Philos Soc 79: 461–472.
  • Bergander A, Salmén L (2002). Cell wall properties and their effects on the mechanical properties of fibers. J Mater Sci 37: 151–156.
  • Biblis EJ (1969). Tensile properties of Loblolly pine growth zones. Wood Fiber Sci 1: 18–28.
  • Donaldson LA, Xu P (2005). Microfibril orientation across the secondary cell wall of radiata pine tracheids. Trees 19: 644–653.
  • Fabisiak E, Moliński W (2007a). Variation in the microfibril angle within individual annual rings in wood of larch (Larix decidua Mill.) from plantation culture. Ann WULS-SGGW For Wood Technol 61: 207–213.
  • Fabisiak E, Moliński W (2007b). Changes in the MFA at the tangential walls of tracheids in larch wood (Larix decidua Mill.) from plantation culture versus the cambial age of annual rings. Folia Forest Polon B 38: 41–54.
  • Gindl W, Schöberl T (2004). The significance of elastic modulus of wood cell walls obtained from nanoindentation measurements. Composites Part A 35: 1345–1349.
  • Groom L, Mott L, Shaler S (2002a). Mechanical properties of individual southern pine fibers. Part I. Determination and variability of stress – strain curves with respect to tree height and juvenility. Wood Fiber Sci 34: 14–27.
  • Groom L, Shaler S, Mott L (2002b). Mechanical properties of individual southern pine fibers. Part III. Global relationships between fiber properties and fiber location within an individual tree. Wood Fiber Sci 34: 238–250.
  • Helińska-Raczkowska L, Raczkowski J (1979). Effect of earlywood and latewood density of Douglas fir (Pseudotsuga menziesii Franco) on its properties in tension along the grains. Prace Komisji Technologii Drewna PTPN WNT: 29–38 (article in Polish with an abstract in English).
  • Kojima Y, Yamamoto H (2004a). Properties of the cell wall constituents in relation to the longitudinal elasticity of wood. Part 2: Origin of the moisture dependency of the longitudinal elasticity of wood. Wood Sci Technol 37: 427–434.
  • Kojima Y, Yamamoto H (2004b). Effect of microfibril angle on the longitudinal tensile creep behavior of wood. J Wood Sci 50: 301–306.
  • Kojima Y, Yamamoto H (2005). Effect of moisture content on the longitudinal tensile creep behavior of wood. J Wood Sci 51: 462–467.
  • Krauss A (2007). Formipovaniye ulga naklona mikrofibrillov vdol’ shirinyi godichnyix sloev sosnyi obyikhovennoi (Pinus sylvestris L.). In: Proceedings of the All-Russia Dendrochronology and Forest Management Conference Devoted to the 50th Anniversary of the Siberian Branch of the Russian Academy of Science, 2–4 October 2007; Krasnoyarsk, Russia, pp 6–9 (in Russian).
  • Krauss A (2010). Ultrastructural features determining selected mechanical properties of pine and spruce wood. Rozprawy Naukowe nr. 406 Wyd. UP w Poznaniu (in Polish with an abstract in English).
  • Mark RE (1967). Cell Wall Mechanics of Tracheids. New Haven, CT, USA: Yale University Press.
  • Mark RE, Gillis PP (1973). The relationship between fiber modulus and S2 angle. Tappi 56: 164–167.
  • Moliński W, Krauss A (2008). Radial gradient of modulus of elasticity of wood and tracheid cell walls in dominant pine trees (Pinus sylvestris L.). Folia Forest Polon B 39: 19–29.
  • Preston RD (1934). The organization of the cell wall of the conifer tracheid. Phil Trans Roy Soc London B 224: 131–172.
  • Reiterer A, Lichtenegger H, Tschegg SE, Fratzl P (1999). Experimental evidence for a mechanical function of the cellulose spiral angle in wood cellulose walls. Philos Mag A 79: 2173–2186.
  • Robson DJ (1989). The measurement of tensile creep in thin wood strip. Wood Sci Technol 23: 229–235.
  • Roszyk E, Kwiatkowski T, Moliński W (2013). Mechanical parameters of pine wood in individual annual rings under tensile stress along the grains in dry and wet state. Wood Research 58: 571– 5
  • Roszyk E, Mania P, Moliński W (2012). The influence of microfibril angle on creep of Scotch Pine wood under tensile stress along the grains. Wood Research 57: 347–358. R oszyk E, Moliński W, Jasińska M (2010). The effect of microfibril angle on hygromechanic creep of wood under tensile stress along the grains. Wood Research 55: 13–24.
  • Salmén L (2004). Micromechanical understanding of the cell-wall structure. C R Biol 327: 873–880.
  • Sarén MP, Serimaa R, Andersson S, Paakkari T, Saranpää P, Pesonen E (2001). Structural variation of tracheids in Norway spruce (Picea abies (L.) Karst.). J Struct Biol 136: 101–109.
  • Sarén MP, Serimaa R, Andersson S, Saranpää P, Keckes J, Fratzl P (2004). Effect of growth rate on mean microfibril angle and cross-sectional shape of tracheids of Norway spruce. Trees 18: 354–362.
  • Wimmer R, Lucas BN, Tsui TY, Oliver WC (1997). Longitudinal hardness and Young’s modulus of spruce tracheid secondary walls using nanoindentation technique. Wood Sci Technol 31: 131–141.
Turkish Journal of Agriculture and Forestry-Cover
  • ISSN: 1300-011X
  • Yayın Aralığı: Yılda 6 Sayı
  • Yayıncı: TÜBİTAK
Sayıdaki Diğer Makaleler

Efficient in vitro plant regeneration from immature embryos of endemic Iris sari and I. schachtii

Satı UZUN, Ali İrfan İLBAŞ, Arif İPEK, Neşet ARSLAN, Surendra BARPETE

Some machining properties of 4 wood species grown in Turkey

Sait Dündar SOFUOĞLU, Ahmet KURTOĞLU

Microbiological, steady, and dynamic rheological characterization of boza samples: temperature sweep tests and applicability of the Cox-Merz rule

Muhammet ARICI, Nevruz Berna ERSÖZ TATLISU, Ömer Said TOKER, Mustafa Tahsin YILMAZ

Effectiveness of nitrogen fertilization and application of microbial preparations in potato cultivation

Marek KOLODZIEJCZYK

The effect of ultrastructure and moisture content on mechanical parameters of pine wood (Pinus sylvestris L.) upon tensile stress along the grains

Edward ROSZYK

Effects of chlorine, hydrogen peroxide, and ozone on the reduction of mancozeb residues on tomatoes

Mehmet Fatih CENGİZ, Muharrem CERTEL

Effects of imazamox on soil carbon and nitrogen mineralization under Mediterranean climate

Nacide KIZILDAĞ, Hüsniye SAĞLIKER, Şahin CENKSEVEN, Hüseyin Cengiz DARICI, Burak KOÇAK

Genetic relationships of some Citrus genotypes based on the candidate iron chlorosis genes

Yıldız AKA KAÇAR, Özhan ŞİMŞEK, Dicle DÖNMEZ, Melda BONCUK, Turgut YEŞİLOĞLU, Patrick OLLITRAULT

Hygienic condition of maize silage (Zea mays L.) depending on cutting height and ensiling additive

Grazyna SZYMANSKA, Hanna SULEWSKA, Marek SELWET

Phenological changes in the chemical content of wild and greenhouse-grown Hypericum pruinatum: flavonoids

Cüneyt ÇIRAK, Jolita RADUSIENE, Liudas IVANAUSKAS, Valdas JAKSTAS, Necdet ÇAMAŞ