Hanifi TOKGÖZ

8387

Shear and Bending Strength of some End to End Grained Joints Prepared from Scotch Pine

This study was carried out to determine the shear and bending strength of different end-to-end grain joints, which were glued with PVAc (polyvinyl acetate). For this reason, specimens, prepared from scotch pine (Pinus sylvestris l), were made with three types of end to end grain joints namely: half-lap, mortise and tenon and double mortise-and-tenon. End-to-end grain of half-lap joints gave the highest strength in shear (2.385 N/mm 2 ) and bending (0.540 N/mm 2 ) experiments.

Anahtar Kelimeler:

Turk. J. Agric. For., 23, (1999), 621-626. Full text: pdf Other articles published in the same issue: Turk. J. Agric. For., vol.23, iss.6.

Shear and Bending Strength of some End to End Grained Joints Prepared from Scotch Pine

This study was carried out to determine the shear and bending strength of different end-to-end grain joints, which were glued with PVAc (polyvinyl acetate). For this reason, specimens, prepared from scotch pine (Pinus sylvestris l), were made with three types of end to end grain joints namely: half-lap, mortise and tenon and double mortise-and-tenon. End-to-end grain of half-lap joints gave the highest strength in shear (2.385 N/mm 2 ) and bending (0.540 N/mm 2 ) experiments.

Keywords:

Turk. J. Agric. For., 23, (1999), 621-626. Full text: pdf Other articles published in the same issue: Turk. J. Agric. For., vol.23, iss.6.,

Turkish Journal of Agriculture and Forestry-Cover

ISSN: 1300-011X
Yayın Aralığı: 6
Yayıncı: TÜBİTAK

Arşiv

Sayıdaki Diğer Makaleler

The Ammonium Fixation in Great Soil Groups of Tokat Region and Some Factors Affecting The Fixation I. The Affect of Potassium on Ammonium Fixation

Chemical and Agronomical Weed Control in Chickpea (Cicer arietinum L. cv. Aziziye-94)

Faik KANTAR, Erdal ELKOCA

Comparing Tillage Techniques by Using a New Infiltration Method Fatih TOPALOĞLU

University of Çukurova, Fac. of Agr. Str. and Irrigation Dept.

Cultivation of Pleurotus floridaon Forest and Agricultural Wastes By Leaves of Tree and Wood Waste

Hüseyin SİVRİKAYA

Comparing Tillage Techniques by Using a New Infiltration Method

Fatih TOPALOĞLU

The Effects of Wood Bleaching Chemicals on the Bending Strength of Wood

Burhanettin UYSAL

Relationships Between Yield and Yield Components on Currently Improved Spring Rapeseed Cultivars

Hakan ÖZER, Erol ORAL

Strength of Individual Soil Aggregates Against Crushing Forces II. Influence of Selected Soil Properties

Taşkın ÖZTAS, Mustafa Y. CANPOLAT, Koray SÖNMEZ

Leaf Area Prediction Models ( Uzçelik-I) For Different Horticultural Plants

Sezgin UZUN, Hüseyin ÇELIK

Effect of Subsequent Simulated Rainfalls on Runoff and Erosion

Günay ERPUL, Mustafa R. ÇANGA