Determination of the head losses in metal body disc filters used in drip irrigation systems

The objective of this study was to determine the head losses in several type metal body disc filters manufactured by domestic companies. In order to meet the objective, three different filter designs (L, LT and Y type), each at four different inlet and outlet pipe diameters, were used to measure the head losses at different flow rates in the laboratory. A total of sixteen filters manufactured by three domestic companies (A, B and C) and two different disc elements (linear and curly) were taken into consideration in this study. A comparison of the different filter designs in terms of measured the head losses indicated that in all cases while the L type filters gave the highest head loss, the other two designs provided less head losses at the same flow rate. Furthermore, the head losses in C-LT type filters with curly groove shape discs were less than B-LT type filters with linear groove shape discs in comparing with the LT type filters produced by two different manufacturers even though the design and the size of the filter body were similar. The differences in the head loss can be clarified with the help of the results obtained from the structural characteristic of filtering elements. As a result, in drip irrigation systems, the use of Y and LT type disc filters with curly groove shaped discs are recommended in order to obtain less head losses and low energy requirements when compared with filters used in this study.

Determination of the head losses in metal body disc filters used in drip irrigation systems

The objective of this study was to determine the head losses in several type metal body disc filters manufactured by domestic companies. In order to meet the objective, three different filter designs (L, LT and Y type), each at four different inlet and outlet pipe diameters, were used to measure the head losses at different flow rates in the laboratory. A total of sixteen filters manufactured by three domestic companies (A, B and C) and two different disc elements (linear and curly) were taken into consideration in this study. A comparison of the different filter designs in terms of measured the head losses indicated that in all cases while the L type filters gave the highest head loss, the other two designs provided less head losses at the same flow rate. Furthermore, the head losses in C-LT type filters with curly groove shape discs were less than B-LT type filters with linear groove shape discs in comparing with the LT type filters produced by two different manufacturers even though the design and the size of the filter body were similar. The differences in the head loss can be clarified with the help of the results obtained from the structural characteristic of filtering elements. As a result, in drip irrigation systems, the use of Y and LT type disc filters with curly groove shaped discs are recommended in order to obtain less head losses and low energy requirements when compared with filters used in this study.

___

  • Adin, A. and G. Alon. 1986. Mechanisms and process parameters of filters screens. Journal of Irrigation and Drainage Engineering (ASCE). 112: 293-304.
  • Adin, A. and M. Sacks. 1991. Dripper-clogging factors in wastewater irrigation. Journal of Irrigation and Drainage Engineering (ASCE). 117: 813–827.
  • Addink J.W., J. Keller, C.H. Pair, R.E. Sneed and J.W. Wolfe. 1983. Design and operation of sprinkler systems. In: Design and Operation of Farm Irrigation Systems (Ed. M.E. Jensen), ASAE Monograph, No.3, Michigan, USA, pp. 621-660.
  • Bulancak, S. 2000. Ege Bölgesi Pamuk Tarımında Damla Sulama Sistemlerinin Uygulanabilirliğinde Filtre Seçimi ve Performansı Üzerinde Bir Araştırma. Yüksek Lisans Tezi. Ege Üniversitesi, Fen Bilimleri Enstitüsü, p. 155.
  • Bulancak, S., V. Demir, H. Yürdem and E. Uz. 2006. Damla sulama sistemlerinde kullanılan çeşitli filtre ve filtre kombinasyonlarının açık kanal sularında kullanılmasındaki etkinliklerinin belirlenmesi. Ege Üniversitesi, Ziraat Fakültesi Dergisi. 43: 85-96.
  • Capra, A. and B. Scicolone. 1998. Water quality and uniformity in drip/trickle irrigation systems. J. Agric. Engng. Res. 70: 355– 365.
  • Capra, A. and B. Scicolone. 2004. Emitter and filter test for wastewater reuse by drip irrigation. Agric. Water Manage. 68: 135–149.
  • Çengel Y.A. and J.M. Cimbala. 2008. Akışkanlar Mekaniği Temelleri ve Uygulamaları. 1.Baskıdan Çeviri, (Editör; T. Engin, Editör Yardımcıları; H.R. Öz, H. Küçük, Ş. Çeşmeci). İzmir Güven Kitabevi, İzmir.
  • Daugherty, R.L. and J.B. Franzini. 1965. Fluid Mechanics with Engineering Applications. 6th Ed. McGraw-Hill, Inc.
  • Demir, V. and E. Uz. 1994. Damla sulama sistemlerinde kullanılan filtreler. Ege Üniversitesi, Ziraat Fakültesi Dergisi. 31: 177-184.
  • Douglas, A. and P.E. Bruce. 1985. Filtration analysis and application. In: Proceedings of the Third International Drip/Trickle Irrigation in Action, ASAE, St.Joseph, MI, pp. 58-68.
  • Duran-Ros, M., J. Puig-Bargues, G. Arbat, J. Barragan and F. Ramirez de Cartagena. 2009. Effect of filter, emitter and location on clogging when using effluents. doi:10.1016/j.agwat.2008.06.005. Agric. Water Manage. 96: 67–79.
  • Gilbert, R.G. and H.W. Ford. 1986. Operational principles-emitter clogging. In: Trickle Irrigation for Crop Production (Eds.: G.S. Nakayama and D.A. Bucks). Elsevier Science Publishers, Netherland, pp.142-237.
  • Howell, T.A., D.S. Stevenson, F.K. Aljibury, H.M. Gitlin, I-Pai Wu, A.W. Warrick and P.A.C. Raats. 1983. Design and operation of trickle (drip) systems. In: Design and Operation of Farm Irrigation Systems (Ed. M.E. Jensen), ASAE Monograph, No.3, Michigan, USA, pp. 663-717.
  • Keller, J. and R.D. Bliesner. 1990. Sprinkle and Trickle Irrigation. An Avi Book, Van Nostrand Reinhold, New York, NY.
  • Puig-Bargués, J., J. Barragan and F. Ramirez de Cartagena. 2005a. Development of equations for calculating the head loss in effluent filtration in microirrigation systems using dimensional analysis. Biosystems Engineering. 92: 383-390.
  • Puig-Bargués, J., G. Arbat, J. Barragan and F. Ramirez de Cartagena. 2005b. Hydraulic performance of drip irrigation subunits using WWTP effluents. Agric. Water Manage. 77: 249–262.
  • Ravina, I., E. Paz, Z. Sofer, A. Marcu, A. Shisha and G. Sagi. 1992. Control of emitter clogging in drip irrigation with reclaimed wastewater. Irrig. Sci. 13: 129–139.
  • Ravina, I., E. Paz, Z. Sofer, A. Marcu, A. Shisha, G. Sagi, Z. Yechialy and Y. Lev. 1997. Control of clogging in drip irrigation with stored treated municipal sewage effluent. Agric. Water Manage. 33: 127–137.
  • Ravina, I. E. Paz, E. Soler, G. Sagi, Z. Yechialy, Z. Lavi and A. Marcu. 1990. Filtration requirements for emitter clogging control. In: Proceedings of the 5th International Conference on Irrigation, Agritech, Tel-Aviv, Israel, pp. 223-229.
  • Uz, E., V. Demir and M. Eren. 1994. Damla sulama sistemlerinde kullanılan filtreler üzerine bir araştırma. 15. Ulusal Tarımsal Mekanizasyon Kongresi Bildiriler Kitabı, Antalya, pp 572-581.
  • Walski, T.M., D.V. Chase, D.A. Savic, W.M. Grayman, S. Beckwith and E. Koelle. 2003. Advanced Water Distribution Modeling and Management. Haestad Press, Waterbury CT, USA.
  • Yürdem, H. and V. Demir. 2003. Damla sulama sistemlerinde kullanılan elek filtrelerde görülen bazı tasarım hatalarının yük kayıpları üzerine etkisi. Ege Üniversitesi, Ziraat Fakültesi Dergisi. 40: 81-88.
  • Yurdem, H., V. Demir and A. Degirmencioglu. 2008. Development of a mathematical model to predict head losses from disc filters in drip irrigation systems using dimensional analysis. Biosystems Engineering. 100: 14-23.
  • Zeier, K.R. and D.Y. Hills. 1987. Trickle irrigation screen filter performance as affected by sand size and concentration. Transactions of the ASAE. 30: 735-739.
Turkish Journal of Agriculture and Forestry-Cover
  • ISSN: 1300-011X
  • Yayın Aralığı: Yılda 6 Sayı
  • Yayıncı: TÜBİTAK
Sayıdaki Diğer Makaleler

Reproduction and survival of overwintered and ^$F_1^$generation of two egg parasitoids of sunn pest, Eurygaster integriceps put. (Heteroptera: scutelleridae)

Şener TARLA, Serpil KORNOŞOR

Damla yöntemiyle sulanan kırkağaç kavununda farklı sulama programlarının gelişme, verim ve meyve kalitesine etkileri

Osman YILDIRIM, Nilgün HALLORAN, Şeyda ÇAVUŞOĞLU, Neslihan ŞENGÜL

Determination of the head losses in metal body disc filters used in drip irrigation systems

Vedat DEMİR, Hüseyin YÜRDEM, Arzu YAZGI, Adnan DEĞİRMENCİOĞLU

Agronomic trait assessment and selection for number of capsules in determinate x indeterminate crosses of sesame

M. İlhan ÇAĞIRGAN, Selçuk ÖZERDEN, M. Onur ÖZBAŞ

Effects of different irrigation programs on the growth, yield, and fruit quality of drip-irrigated melon

Osman YILDIRIM, Nilgün HALLORAN, Şeyda ÇAVUŞOĞLU, Neslihan ŞENGÜL

Determination of soil loss by $^{137} Cs$ fallout radionuclide in Ömerli watershed of İstanbul, Turkey

Ferhat GÖKBULAK, Sevilay HACIYAKUPOĞLU, Ahmet HIZAL, Muhammet Sahip KIZILTAŞ

The effects of different temperatures and diets on the biology of Cales noacki Howard (Hymenoptera: Aphelinidae), a parasitoid of the citrus woolly whitefly

Gonca VATANSEVER SAKİN, M. Rifat ULUSOY

Reproduction and survival of overwintered and F1 generation of two egg parasitoids of sunn pest, Eurygaster integriceps Put. (Heteroptera: Scutelleridae)

Şener TARLA, Serpil KORNOŞOR

The use of aridity index to assess implications of climatic change for land cover in Turkey

Derya ÖNDER, Mehmet AYDIN, Süha BERBEROĞLU, Sermet ÖNDER, Tomohisa YANO

Orthotomicus tridentatus Eggers: distribution and biology in cedar forests of Turkey

Mustafa AVCI, Oğuzhan SARIKAYA