MİNERALOJİK KATKILARIN ÇEŞİTLİ TANIMLARI, SINIFLARI, ÖZELLİKLERİ ve KULLANIM ALANLARI (BÖLÜM 1)

Dünya’ da ve Türkiye’ de mineralojik malzemeler çimento ve beton katkılarıdır. Mineralojik malzemelerin özelliklerinin bilinmesi bu malzemelerin çimento, harç ve beton özelliklerine etkilerinin daha iyi anlaşılmasını sağlar. Bu nedenle bu araştırmada mineralojik katkıların çeşitli tanımları, sınıfları, özellikleri ve kullanım alanlarının incelenmesi amaçlanmıştır. Mineralojik katkılar elde edilişlerine göre doğal ve doğal olmayan puzolanlar olarak ikiye ayrılır. Volkanik, sedimanter ve diyajenetik malzemeler doğal puzolanlardır. Doğal olmayan puzolanlar ise endüstri atıklarıdır. Literatürde incelenen çalışmalarda mineralojik katkılar, çimento, harç ve betonun dayanımını, bağlayıcılığını artırıp ve onları zararlı kimyasal etkilerden korumaktadır. Bu çalışmanın birinci bölümünde mineralojik katkıların çeşitli tanımları, sınıfları ve özelliklerinin bir kısmı anlatılmıştır. Mineralojik katkıların özelliklerinin devamı kullanım alanları, sonuçlar ve tartışmalar makalenin ikinci bölümünde açıklanacaktır

THE DIFFERENT DEFINITIONS, CLASSIFICATION, PROPERTIES AND USAGE AREAS OF THE MINERALOGICAL ADDITIVES (PART I)

Mineralogical materials are cement and concrete additives in Turkey and the world. The fact that the properties of mineralogical materials are known enables the effects of these materials on the cement, mortar and concrete properties to be understood better. Therefore, in this study the different definitions, classification, properties and usage areas of the mineralogical additives are aimed. Mineralogical additives are divided into two types as natural and unnatural pozzolana in accordance with the way they are obtained. Volcanic, sedimentation and diagenetic materials are natural pozzolana. Artificial pozzolana is, on the other hand, industrial wastes. In literature examined papers were shown that the mineralogical additives are increasing cement, mortar and concrete strength and binding to protect them harmful chemical effects. In first part of this study was told the different definitions, classification and a part of the properties of the mineralogical additives. Continued of the properties and usage areas of the mineralogical additives, results and discussions will explain in the paper’s second part

___

  • 1. Kırgız, MS. Mermer ve tuğla endüstrisi atıklarının çimento üretiminde mineralojik katkı olarak kullanılması, 228 S., Doktora Tezi, Gazi Üniversitesi Fen Bilimleri Enstitüsü, Ankara, 2007.
  • 2. Gimenez, S, Blanco, MT, Palomo, A., Puertas, F. Production of cement requiring low energy expenditure – An industrial test, ZKG International, 44 (1): 12–15, 1991.
  • 3. Kreijger, PJ. Terminology, definition and classification of admixtures, Materials and Structures, 1 (2): 79– 88,1968.
  • 4. ASTM C 125, Standard terminology relating to concrete and concrete aggregates, 1-4 S., ASTM International, Conshohocken, 2003.
  • 5. ACI 116R – 90, Cement and concrete terminology, 1 – 82 S., American Concrete Institute Report, Michigan, 2008.
  • 6. Neville, AM, Brooks JJ. Admixtures, S. 147 – 160, 1987, [Editörler: Neville, AM, Brooks JJ. Concrete technology, 431 S., Longman Scientific & Technical, Harlow Essex].
  • 7. Mindess, S., Young, JF, Darwin, D. Mineral admixture and blended cement, S. 93 – 114, 2002, [Editörler: Mindess, S., Young, JF, Darwin, D. Concrete, Second Edition, 629 S., Pearson Education Inc., Prentice Hall, New Jersey].
  • 8. Yeğinobalı, A. Katkılı betonmu, katkılı çimentomu, Çimento ve Beton Dünyası, 5 (30): 33 – 35, 2001.
  • 9. Rouman, JC, Sarkar, LS, 21. Yüzyılın çimentoları, Çimento ve Beton Dünyası, 5 (30): 36 – 45, 2001.
  • 10. Gutt, W, Nixon, PJ. Use of waste materials in the construction industry, Materials and Structures, 12 (70): 255 – 306, 1970.
  • 11. Erdoğan, TY. Mineral katkı maddeleri, S. 169 – 208, 2003, Portland çimentoları ve diğer çimento türleri, S. 17 – 37, 2003. [Editörler: Erdoğan, TY. Beton, 741 S., ODTÜ Geliştirme Vakfı Yayıncılık ve İletişim A.Ş., Ankara].
  • 12. Lewis, R., Sear, L., Wainwright, P., Ryle, R. Part 2 Cementitious additions, , S. 1-66, 2003, [Editörler: Newman, J., Choo, BS. Advanced concrete technology constituent materials, 272 S., Elsiver Ltd., London].
  • 13. ASTM C 618, Standard specification for coal fly ash and raw or calcined natural pozzolan for use mineral admixture in concrete”, 1 – 4 S., 2003, ASTM International, Conshohocken.
  • 14. Tokyay, M. Cüruflar ve cüruflu çimentolar, 47 S., 2002, Türkiye Çimento Müstahsilleri Birliği, Ar – Ge Y97-2, Ankara.