Halil İbrahim ÇELİK, Özhan ÇOBAN, Esin SARIOĞLU

YARN QUALITY INVESTIGATION OF COMPACT COTTON YARNS WITH DIFFERENT COMBING NOIL PERCENTAGE

The noil percentage of the combing process can be varied 8-25% depending on the cotton quality and combing machine adjustments to obtain desired cotton yarn quality parameters. In this study, the effect of combing noil percentage on yarn quality for different linear densities (19.7 and 14.8 tex) and twist coefficients (3, 3.5 and 4) in the production of the compact spun yarn was investigated. Comber noil percentage was chosen in accordance with optimum combing machine setting as 14, 16 and 18%. The amount of noil percentage to be extracted at comber was achieved by forward feeding detaching which means the material is fed whilst the nipper is rocking towards the detaching roller to obtain better fiber control. Then, the tenacity, elongation, unevenness, imperfection index (IPI) and hairiness values of the yarn samples were determined. Analysis of variance and multiple regression analysis was carried out to analyze the relationship between a yarn quality variables and linear density, twist coefficient, noil percentage independent variables.

Keywords:

comber noil, forward feeding compact yarn, yarn quality, twist coefficient,

PDF

___

Referans [1]. Lawrence, Carl A. Fundamentals of spun yarn technology. 2003, USA: CRC Press LLC.
Referans [2]. Majumdar, A., Das, A., Alagirusamy, R., Kothari, V. K., Process control in textile manufacturing, 2013, Chapter 7:Process control in drawing, combing and speed frame operations , USA: Woodhead Publishing Limited.
Referans [3]. El Messiry, M., Hosny, N. & Esmat, G. Optimization of the combing noil percentage for quality single and ply compact spun yarn. Alexandria Engineering Journal, 2013, 52:307-311.
Referans [4]. Jamil, N.A., Mahmood, N. Influence of noils upon cotton yarn quality. Pak.J.Agri.Sci., 1999, 36 (1-2):67-69.
Referans [5]. Dipali, B., Raichurkar, P.P., Bandopadhyay, S.P., Akade, A., Pachhade, P.M. To study effect of comber noil percentage on yarn quality. Fibre2Fashion. 2011.
Referans [6]. Bedez Ute, T., Çelik, P., Üzümcü, M.B. Utilization of cotton spinning mill waste in yarn production, Textile Industry and Environment, 2019, Ed:Ayşegül Körlü, IntechOpen, Chapter 4, 1-14, DOI: 10.5772/intechopen.85127
Referans [7]. Subramanian, S., Gobi, N. Effect of process parameters at comber on yarn and fabric properties. Indian Journal of Fibre&Textile Research. 2004, 29:196-199.
Referans [8]. Buharalı, G., Ömeroğlu, S. Open-end rotor iplik özelliklerine etki eden faktörler, Uludağ Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, 2013, 18-2: p.19-35.
Referans [9]. Yitik, B., Effects of waste on yarn quality parameters and decreasing waste ratio in a cotton yarn mill, Marmara University, Turkey, 2006.
Referans [10]. Malik M., H., Hussain T, Effect of percentage of short fibers removed from cotton during spinning on the properties of dyed polyester/cotton‐blended knitted fabrics, The Journal of The Textile Institute. 2011, 102(1):70-76.