___

• [1]. Morintale E., Harabor A., Constantinescu C., Rotaru P. 2015, Use of heat flows from DSC curve for calculaion of specific heat of the solid Materials, Physics AUC. Vol. 23, 89-94 [2]Wielgosz, E., Kargul T., Falkus J. 2014, Comparison of Experimental and Numerically Calcuated Thermal Properties of Steels, International Conference on Metallurgy and Materials, Metal 2014, May 21 st-23rd 2014, Brno, Czech Republic[3]Fang H.,, Wong M.B., Bai Y. 2015,Use of kinetic model for thermal properties of steel at high temperatures, Australian Journal of Civil Engineering, 13:1, 40-47,[4]Kelley K.K..1949, X. High‐temperature heat‐content, heat‐capacity, and entropy data for inorganic compounds, Bureau of Mines Bull. 476, 192 (1949). [5] Abdoos H., Khorsand H., Shahani A.R., Fatigue Behavior of Diffusion Bonded Powder Metallurgy Steel with Heterogeneous Microstructure, Materials and Design 30 (2009) 1026–1031[6] James WB, OtBrien RC. High performance Ferrous PM Materials: The Effect of Alloying Method on Dynamic Properties. Progress in powder Metallurgy. Princeton NJ: MPIF; 1986.[7] Alzati L, Bergmark A, Andersson J. Fatigue Performance of PM Steel in Assintered State. Presented at PMAI conference, Mumbai, India, February;2005[8]Lindskog P. The history of Distaloy, Powder Metallurgy, 56:5, (2013) 351-361,[9]Öksüz K.E., Kumruoğlu L.C., Tur O. , Effect of Sicp on the Microstructure and Mechanical Properties of Sintered Distaloy DC Composites, (5th International Biennial Conference on Ultrafine Grained and Nanostructured Materials, UFGNSM15), 11-12 November 2015, Tehran-Iran, Procedia Materials Science 11 ( 2015 ) 49 – 54[10] Panda S.S., Singh V., Upadhyaya A., Agrawal D., Sintering Response of Austenitic (316L) And Ferritic (434L) Stainless Steel Consolidated in Conventional and Microwave Furnaces,Scripta Materialia 54 (2006) 2179–2183 [11] Giménez S., Vagnon A., Bouvard D., Van der Biest O., Influence of the Green Density on the Dewaxing Behaviour of Uniaxially Pressed Powder Compacts, Materials Science and Engineering A 430 , (2006) ,277–284[12] Yılmaz R.,Ekici M.R., Üretim Parametrelerin Düşük Alaşımlı TM Çeliklerin Sertlik Ve Aşınma Özelliklerine Etkisi ISITES2015 Valencia –Spain, 2545-2554[13] Zarebski K., Putyra P., 2015, Iron Powder-based Graded Products Sintered by Conventional Method and by SPS, Advanced Powder Technology 26 (2015) 401–408[14] Al-Qureshi H.A., Galiotto A., Klein A.N., On the mechanics of cold die compaction for powder metallurgy, Journal of Materials Processing Technology 166 (2005) 135–143[15] Acar A.N., Ekşi A.K., Ekicibil A., Effect of pressure on the magnetic and structural properties of X2CrNiMo17-12-2 austenitic stainless steel prepared by powder metallurgy method Journal of Molecular Structure, Volume 1198, 15 December 2019, 126876[16].Acar A.N., Mutlu R.N., Ekşi A.K., Ekicibil A., Yazıcı B., Effect of temperature and pressure on mechanical, surface and electrochemical properties of Al-1.5Cu-5.5Zn-2.5Mg (Alumix-431), Anti-Corrosion Methods and Materials 65/6 (2018) 558–571[17] Butković S., Oruč M., Šarić E., Mehmedović M., Effect of Sınterıng Parameters on the Density, Microstructure And Mechanical Properties of the Niobium-Modified Heat-Resistant Stainless Steel GX40CrNiSi25-20 Produced by MIM Technology, Materiali in tehnologije / Materials and technology 46 (2012) 2, 185–190, [18]Pandya S., Ramakrishna K.S., Annamalai A.R., Upadhyaya A., Effect of Sintering Temperature on the Mechanical and Electrochemical Properties of Austenitic Stainless Steel, Materials Science and Engineering A 556 (2012) 271–277, [19]Butković S., Sinterability And Tensile Properties of Nickel Free Austenitic Stainless Steel X15CrMnMoN 17 11 3,Tehnički vjesnik 20, 2(2013), 269-274 269, Technical Gazette 20, 2(2013), 269-274).[20] Karthikeyan B., Ramanathan S., Ramakrishnan V., A Calorimetry Study of 7075Al/SiCp Composites, Materials and Design 31(2010) S92-S95.[21] Witthan B., Reschab H., Tanzer R. Shützenhöfer W., Pootlacher G., Thermophysical Properties of Chromium-Nickel-Molybdenum Steel in the Solid and Liquid phases , Int J. Thermophy. 2008 29:434-444[22] Karwan-Baczewska J. Processing and Properties of Distaloy SA Sintered Alloys with Boron and Carbon, Archives of Metallurgy and Materials 2015 ,60 (1),41-45 [23] Abdoos H., Khorsand H., Shahani A.R., Fatigue Behavior of Diffusion Bonded Powder Metallurgy Steel with Heterogeneous Microstructure, Materials and Design 30 (2009) 1026–1031