THERMAL FATIGUE RESISTANCE OF GLASS/EPOXY LAMINATED COMPOSITES
THERMAL FATIGUE RESISTANCE OF GLASS/EPOXY LAMINATED COMPOSITES
The material of the fiber and matrix of polymer matrix composites directly influences the mechanical performance of a composite. Fibers are generally expected to have high elastic modulus and strengths. Due to the nature of polymer matrix composites, due to the combination of different materials at the macroscopic level, they are highly affected by thermal loads. Sometimes, perhaps the most important design criterion may be the resistance of these materials to thermal loads. Also, these loads can be repeated due to the needs of usage areas. Especially in the aviation industry, resistance to repetitive thermal loads is very important in the design of aerospace vehicles. In this study, it is aimed to understand behavior of Glass/Epoxy polymer matrix composites under the thermal fatigue loads. [(0/90)2]s, [(15/-75)2]s, [(30/-60)2]s, and [(45/-45)2]s fiber orientations are used. Effects of two different boundary conditions are also researched.
Keywords:
Polymer Composites Thermal fatigue, FEM,
___
- Yeter, Eyüp. (2018). Thermal Fatigue Analyses of Riveted Structures. Mechanics. 24.5: 689-694
- Yeter, Eyüp. (2018). Thermal fatigue characteristics of materials used in aerospace structures. Energy, Ecology and Environment. 3.1: 24-31
- Yeter E and Özer L. Thermal Fatigue Characteristics of Plates with Cutouts. International Advanced Researches Engineering Congress-2017
- Kobayashi, S., Terada, K., Ogihara, S., & Takeda, N. (2001). Damage-mechanics analysis of matrix cracking in cross-ply CFRP laminates under thermal fatigue. Composites science and technology, 61(12), 1735-1742
- Kobayashi, S., Terada, K., & Takeda, N. (2003). Evaluation of long-term durability in high temperature resistant CFRP laminates under thermal fatigue loading. Composites Part B: Engineering, 34(8), 753-759
- Zhou, Y., Wei, S., Wang, L., Xu, L., Li, X., & Pan, K. (2020). Study on thermal fatigue performance of the molybdenum plate doped with Al2O3 particles. Journal of Alloys and Compounds, 823, 153748
- Chen, X., Peng, X., Wei, Z., Yue, X., & Fu, T. (2017). Effect of tensile stress on thermal fatigue life of ZrB2-SiC-graphite composite. Materials & Design, 126, 91-97
- Tian, C., Liu, N., & Lu, M. (2008). Thermal shock and thermal fatigue behavior of Si3N4–TiC nano-composites. International Journal of Refractory Metals and Hard Materials, 26(5), 478-484
- Misak, H. E., Sabelkin, V., Mall, S., & Kladitis, P. E. (2013). Thermal fatigue and hypothermal atomic oxygen exposure behavior of carbon nanotube wire. Carbon, 57, 42-49
- Gkikas, G., Douka, D. D., Barkoula, N. M., & Paipetis, A. S. (2015). Nano-enhanced composite materials under thermal shock and environmental degradation: a durability study. Composites Part B: Engineering, 70, 206-214
- Göv, İ., “A novel approach for design of fiber angle and layer number of composite plates”, Polymer Composites, 2017, 38(2): 268-276
- Doğru, M.H., "Tsai-wu kriteri kullanarak kompozit plakaların optimizasyonu için geliştirilen algoritma", Journal of the Faculty of Engineering and Architecture of Gazi University, 32(3): 821-829, (2017)
- Kaw, A. K. (2005). Mechanics of composite materials. CRC press
- ISSN: 2602-294X
- Yayın Aralığı: Yılda 2 Sayı
- Başlangıç: 2016
- Yayıncı: Gaziantep Üniversitesi