IMPROVEMENT OF MAGNETIC PROPERTIES OF MELT-SPUN PRODUCED Nd2Fe14B PARTICLES DURING SURFACTANT-ASSISTED BALL MILLING
IMPROVEMENT OF MAGNETIC PROPERTIES OF MELT-SPUN PRODUCED Nd2Fe14B PARTICLES DURING SURFACTANT-ASSISTED BALL MILLING
NdFeB permanent magnets are used for variety of applications such as electronics, automotive and clean technology industries. The majority of commercial NdFeB permanent magnets are produced by melt-spinning techniques and sintering. The sintered NdFeB magnets represent about 90% of the total rare earth permanent magnet market. Sintered melt-spin NdFeB magnets exhibit the highest magnetic performance due to their strong crystallographic alignment. These magnets have enabled their applications to operate with the highest energy efficiencies and to be fabricated in the most compact form. In this study, the flaky shaped Nd15Fe77B8 magnetic alloy powders were produced by melt-spinning technique. In this process, the powders were produced by using a single roller melt spinning apparatus with high vacuum atmosphere (10-7 mbar). The flaky shaped Nd15Fe77B6 powders were milled by using the high energy ball milling under vacuum atmosphere with surfactant-assisted material. The experiments were performed to optimize the milling parameters regarding the particle size and magnetic properties of the powders
Keywords:
Nd15Fe77B8 magnetic alloy, Melt spinning, Surfactant-assisted,
___
- Brown, D. N., Wu, Z., He, F., Miller, D. J., & Herchenroeder, J. W. (2014). Dysprosium-free melt-spun permanent magnets. Journal of Physics: Condensed Matter, 26(6), 64202. http://doi.org/10.1088/0953-8984/26/6/064202
- Chandrasekaran, P. S. and R. G. and N. V. R. R. and M. M. R. and V. (2007). SmCo 5 /Fe nanocomposite magnetic powders processed by magnetic field-assisted ball milling with and without surfactant. Journal of Physics D: Applied Physics, 40(17), 5021. http://doi.org/10.1088/0022-3727/40/17/002
- Lewis, L. H., Panchanathan, V., & Wang, J. Y. (1997). Technical magnetic properties of melt-spun (Nd1-xPrx)(2)Fe14B at low temperature. Journal of Magnetism and Magnetic Materials, 176(2–3), 288–296. http://doi.org/10.1016/S0304-8853(97)00648-3
- Neu, V., & Schultz, L. (2001). Two-phase high-performance Nd-Fe-B powders prepared by mechanical milling. Journal of Applied Physics, 90(3), 1540–1544. http://doi.org/10.1063/1.1380223
- Ono, K., Kakefuda, Y., Okuda, R., Ishii, Y., Kamimura, S., Kitamura, a., & Oshima, M. (2002). Organometallic synthesis and magnetic properties of ferromagnetic SmCo nanoclusters. Journal of Applied Physics, 91(10 I), 8480–8482. http://doi.org/10.1063/1.1456407
- Ozawa, S., Saito, T., & Motegi, T. (2004). Effects of cooling rate on microstructures and magnetic properties of Nd-Fe-B alloys. Journal of Alloys and Compounds, 363(1–2), 263–270. http://doi.org/10.1016/S0925-8388(03)00461-4
- Rong, C., Poudyal, N., & Liu, J. P. (2010). Size-dependent spin-reorientation transition in Nd2Fe14B nanoparticles. Physics Letters A, 374(38), 3967–3970. http://doi.org/10.1016/j.physleta.2010.07.061
- Simeonidis, K., Sarafidis, C., Papastergiadis, E., Angelakeris, M., Tsiaoussis, I., & Kalogirou, O. (2011). Evolution of Nd2Fe14B nanoparticles magnetism during surfactant-assisted ball-milling. Intermetallics, 19(4), 589–595. http://doi.org/10.1016/j.intermet.2010.12.012
- Su, K. P., Liu, Z. W., Zeng, D. C., Huo, D. X., Li, L. W., & Zhang, G. Q. (2013).
- Structure and size-dependent properties of NdFeB nanoparticles and textured nano-flakes prepared from nanocrystalline ribbons. Journal of Physics D: Applied Physics, 46(24), 245003. http://doi.org/10.1088/0022-3727/46/24/245003
- Szymura, S., Wyslicki, J., Rabinovich, Y., & Bala, H. (1994). Domain structure, magnetic and mechanical properties of Nd-Fe-B magnets with different grain size. Phys. Stat. Sol. (a), 141, 435.
- Tian, Z., Li, S., Peng, K., Gu, B., Zhang, J., Lu, M., & Du, Y. (2004). The microstructure and magnetic properties of NdFeB magnets directly solidified at a low cooling rate. Materials Science and Engineering A, 380(1), 143–146. http://doi.org/10.1016/j.msea.2004.03.077
- Yan, G. H., Chen, R. J., Ding, Y., Guo, S., Lee, D., & Yan, a R. (2011). The preparation of sintered NdFeB magnet with high-coercivity and high temperaturestability. Journal of Physics: Conference Series, 266(1), 12052. http://doi.org/10.1088/1742-6596/266/1/012052
- ISSN: 2602-294X
- Yayın Aralığı: Yılda 2 Sayı
- Başlangıç: 2016
- Yayıncı: Gaziantep Üniversitesi
Sayıdaki Diğer Makaleler
SOIL EROSION RISK IN BARAK PLAIN FROM THE PERSPECTIVE OF THE ENVIRONMENTALISTS
Erdihan TUNÇ, Şahabettin DOĞAN
Sultan ÖZTÜRK, Kürşat İCİN, Bülent ÖZTÜRK, Uğur TOPAL, Hülya KAFTELEN
MICROCONTROLLER-BASED COOLING OF A SINGLE-PHASE TRANSFORMER WITH THERMOELECTRIC MODULE
Adem DALCALI, Hüseyin DEMIREL, Emre CELIK
A BOW-TIE ANTENNA DESIGN FOR BREAST CANCER DETECTION
Emine AVŞAR AYDIN, Duygu Nazan GENÇOĞLAN
THE EFFECTS OF LIFE SPAN ON ENERGY CONSUMPTION AND CO2 EMISSIONS OF CONTAINER HOUSES