___

• Hanselman, D. Brushless permanent magnet motor design. 2nd ed. OH: Magna Physıcs Publishing, 2006.
• Saygın, A., Ocak, C., Dalcalı, A., Çelik, E. Optimum rotor design of small PM BLDC motor based on high efficiency criteria. ARPN Journal of Engineering and Applied Sciences 2015; 10(19): 9127-9132.
• Bayındır, R., Ocak, C., Topaloğlu, İ. Investigation of the effect of magnet thickness on output power and torque of PM BLDC machines using parametric approach method. In Proceedings of POWERENG 2011; 11-13 May 2011; Malaga, Spain. pp. 1-4.
• Ehsani, M., Gao, Y., Gay, S. Characterization of electric motor drives for traction applications. IECON'03. 29th Annual Conference of the IEEE Industrial Electronics Society; Roanoke, VA, USA, 2003, pp. 891-896 vol.1
• Yuan, M., Niu, S. Design and analysis of a novel modular linear double-stator biased flux machine. IEEE Transactions on Magnetics, Early Access, 2018: 1-5.
• Zhang, F., Yu, S., Wang, Y., Jin, S., Jovanovic, M.G. Design and performance comparisons of brushless doubly fed generators with different rotor structures. IEEE Transactions on Industrial Electronics, 2019: 66(1), 631-640. doi: 0.1109/TIE.2018.2811379
• Carraro, E., Zhang, S., Koch, M. Design and performance comparison of fractional slot concentrated winding spoke type synchronous motors with different slot-pole combinations. IEEE Transactions on Industry Applications, 2018: 54(3), 2276-2284.
• Jun, H.W., Seol, H.S., Lee, J. Effect of pole–slot combination on eddy-current formation in pmsm rotor assembly ıncluding retaining plate structure. IEEE Transactions on Magnetics, 2017: 53(11).
• Zhu, Z.Q., Wu, J., Modh Jamil, M.L. Influence of pole and slot number combinations on cogging torque in permanent-magnet machines with static and rotating eccentricities. IEEE Transactions on Industry Applications, 2014: 50(5), 3265-3277.
• Jafarishiadeh, S., Ardebili, M., Marashi, A.N. Investigation of pole and slot numbers in axial-flux pm BLDC motors with single-layer windings for electric vehicles. 24th Iranian Conference on Electrical Engineering (ICEE), 2016, Shiraz, Iran.
• Lee, S.J., Kim, S.I., Hong, J.P. Characteristics of PM synchronous motors according to pole-slot combinations for eps applications. International Journal of Automotive Technology, 2014: 15(7), 1183−1187. doi: 10.1007/s12239-014-0123-6
• Çelik, E., Öztürk, N. A new fuzzy logic estimator for reduction of commutation current pulsation in brushless DC motor drives with three-phase excitation. Neural Comput & Application, 2017: 1-10. doi: 10.1007/s00521-017-3083-8
• Krishan, R. Electric motor drives: modeling, analysis and control. New Jersey: Prentice Hall, Inc. 2001.
• Aydoğdu, Ö. Sensorless control of brushless dc motors by means of genetic based fuzzy controller. PhD Thesis, Selçuk University, Konya, Turkey 2006.
• Hameyer, K., Belmans, R. Numerical modelling and design of electrical machines and devices. Southampton, Boston: WIT Press, 1999.
• Dalcalı, A., Kurt, E., Çelik, E., Öztürk., N. Cogging torque reduction by using the skewing and separated magnet techniques. 6th Eur. Conf. Ren. Energy Sys., 2018: 24(6), Istanbul, Turkey.
• Dalcalı, A., Akbaba, M. Comparison of 2D and 3D magnetic field analysis of single-phase shaded pole induction motors. Engineering Science and Technology, An International Journal, 2016: 19(1), 1–7. doi: 10.1016/j.jestch.2015.04.013
• Ho, S. L., Fu, W. N. Review and future application of finite element methodes in induction motors. Electric Machines & Power Systems, 1998: 26 (2), 111–125.
• Dadpour, A., Ansari, K. Conversion of shaded-pole induction motor to switched reluctance motor and effects of pole shoe and notch on SRM noise", IEEE XXXIII International Scientific Conference Electronics and Nanotechnology, 2013, Kiev.