CHASSIS ANALYSIS OF ELECTRIC VEHICLE DESIGNED FOR TEKNOFEST EFFICIENCY CHALLENGE RACE
Anahtar Kelimeler:
Structural analysis, efficiency challenge, finite element analysis
CHASSIS ANALYSIS OF ELECTRIC VEHICLE DESIGNED FOR TEKNOFEST EFFICIENCY CHALLENGE RACE
In this study, the deformation and stress values of the chassis made for the Efficiency Challenge electric vehicle competition, one of the Teknofest competitions, were investigated using the finite element method under impact and static loads. The chassis was designed with the Solidworks program, taking into account the chassis design criteria of the efficiency challenge race. With the help of Ansys Workbench, the designed chassis was analyzed under static load depending on the front, side, rear impact and the mass on it. According to the analysis results, the chassis withstood static loads. However, in the crash tests, the maximum stress value was above the yield value. According to the maximum stress points on the chassis, the chassis was redesigned and the analyzes were repeated.
___
- [1] Yay K, Ereke I, Bilir M, Çataltepe V. Fatigue strength of an urban type midi bus vehicle chassis by using fem analysis and accelerated fatigue life test. SAE Technical Paper 2009; 2009-01-1453.
- [2] Doğan MM. Bir midibüs gövdesinin sonlu elemanlar yöntemi ile analizi. MSc. İstanbul Teknik Üniversitesi, İstanbul, Turkey, 2004.
- [3] Yiğit AO, Feyzullahoğlu E. Formula student yarış aracı şasi tasarımı ve analizi. Journal of Advanced Research in Natural and Applied Sciences 2021; 7(2): 201-218.
- [4] Çimendağ M. Elektrikli ve konvansiyonel araçlara ait iki şasi tasarımının yandan çarpışma deformasyonlarının incelenmesi. MSc. Pamukkale Üniversitesi, Denizli, Turkey, 2022.
- [5] Karamanlı İA, Dalğa Ö, Özerol B, Ertaş AH. Araç şasi analizi: bir uygulama. In: 8. Otomotiv Teknolojileri Kongresi; 23 – 24 Mayıs 2016; Bursa, Turkey: pp. 69.
- [6] Aşkar MT. Bilgisayar destekli çarpışma analizi ile otomobil ön tampon optimizasyonu. MSc. Sakarya Üniversitesi, Sakarya, Turkey, 2018.
- [7] Karaoğlan MU, Turnalı ÖY, Kuralay NS. Hafif hizmet araci şasi analizi ve optimizasyonu. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi 2016; 18(3): 502-512.
- [8] Sener AS. Fatigue life evaluation of an electrically driven shuttle frame using finite element analysis. Materials Testing 2021; 63(4): 329-335.
- [9] Ansys GRANTA EDUPACK, CES EduPack 2019
- ISSN: 2602-294X
- Yayın Aralığı: Yılda 2 Sayı
- Başlangıç: 2016
- Yayıncı: Gaziantep Üniversitesi