LAGRANGE SONLU ELEMANLAR YÖNTEMİYLE KUMAŞLARIN BÜYÜK DEFORMASYON DAVRANIŞLARININ HESAPLANMASI

Bu çalışmada, eğilme ve eksenel deformasyon rijitliğini içeren Lagrange Sonlu Elemanlar formülasyonu, kumaş ağırlığını içerecek şekilde genişletilmiş ve kumaşların büyük eğilme ve burkulma deformasyonlarının hesaplanması için incelenmiştir. Deformasyon sonuçları, literatürdeki sonuçlarla karşılaştırılmıştır. Hesaplanan sonuçların, daha önce yayınlanan sonuçlarla oldukça iyi uyum içinde olduğu gösterilmiştir

PREDICTION OF LARGE DEFORMATION BEHAVIOR OF FABRICS USING LAGRANGIAN FINITE ELEMENT FORMULATION

In this study, the Lagrangian Finite Element formulation, covering both the tensile and bending rigidities, is extended to include fabric weights and then exploited for the prediction of the large bending and buckling deformations of fabrics. The deformations results are compared with those published in the literature. It is shown that there is an excellent agreement between the calculated results and the previously published results

___

  • 1. Grosberg, P., 1966, ‘‘The Mechanical Properties of Woven Fabrics, Part II: The Bending of Woven Fabrics’’, Textile Research Journal, Vol.36, No.3, pp.205-211.
  • 2. Grosberg, P. and Swani, N.M., 1966, ‘‘The Mechanical Properties of Woven Fabrics, Part III: The Buckling of Woven Fabrics, Textile Research Journal, Vol.36, No.4, pp.332-338.
  • 3. Lloyd, D.W., Shanahan, W.J. and Konopasek, M., 1978, ‘‘The Folding of Heavy Fabric Sheets’’, International Journal of Mechanical Science, Vol.20, No.8, pp.521-527.
  • 4. Brown, P.R., Buchanan, D.R. and Clapp, T.G., 1990, ‘‘Large Deflection Bending of Woven Fabric for Automated Material Handling’’, Journal of the Textile Institute, Vol.81, No.1, pp.1-14.
  • 5. Clapp, T.G., and Peng, H., 1990, ‘‘Buckling of Woven Fabrics, Part I: Effect of Fabric Weight’’, Textile Research Journal, Vol.60, No.4, pp.228-234.
  • 6. Clapp, T.G., and Peng, H., 1990, ‘‘Buckling of Woven Fabrics, Part II: Effect of Weight and Frictional Couple’’, Textile Research Journal, Vol.60, No.5, pp.285-292 .
  • 7. Clapp, T.G., and Peng, H., 1991, ‘‘A Comparison of Linear and Non-linear Bending Models for Predicting Fabric Deformation in Automated Handling’’, Journal of the Textile Institute, Vol.82, No.3, pp. 341-352.
  • 8. Kang, T.J., Joo, K.H., and Lee, K.W., 2004, ‘‘Analyzing Fabric Buckling Based on Nonlinear Bending Properties’’, Textile Research Journal, Vol.74, No.2, pp.172-177.
  • 9. Szablewski, P. and Kobza, W., 2003, ‘‘Numerical Analysis of Peirce’s Cantilever Test for the Bending Rigidity of Textiles’’, Fiber & Textiles in Eastern Europe, Vol.11, No.4, pp.54-57.
  • 10. Zhou, N. and Ghosh, T.K., 1997, ‘‘On-Line Measurement of Fabric Bending Behavior, Part I: Theoretical Study of Static Fabric Loops’’, Textile Research Journal, Vol.67,No. pp.712-719.
  • 11. Zhou, N. and Ghosh, T.K., 1998, ‘‘On-Line Measurement of Fabric Bending Behavior, Part II: Effects of Fabric Nonlinear Bending Behavior’’, Textile Research Journal., Vol. 68, No.7, pp.533-542.
  • 12. Demiroz, A., 2005, ‘‘Prediction of Large Deformation Behavior of Fabric Using Galerkin Finite Element Method’’, Textile Research Journal, Vol.75, No.9, pp.662-669.
  • 13. Anandjiwala, R.D. and Gonsalves, J.W., 2006, ‘‘Nonlinear Buckling of Woven Fabrics, Part I: Elastic and Nonelastic Cases, Textile Research Journal, Vol.76, No.2, pp.160-168.
  • 14. Potluri, P., Atkinson, J. and Porat, I., 1996, ‘‘Large Deformation Modelling of Flexible Materials’’, Journal of the Textile Institute, Vol.87, No.1, pp.129-151.
  • 15. Collier, J.R., Collier, B.J., O'Toole, G. and Sargand, S.M., 1991, ‘‘Drape Prediction by Means of Finite-element Analysis’’, Journal of the Textile Institute, Vol.82, No.1, pp.96-107.
  • 16. Kang, T.J., and Yu, W.R., 1995, ‘‘Drape Simulation of Woven Fabric by Using the Finite-element Method’’, Journal of the Textile Institute, Vol.86, No.4, pp.635-648.
  • 17. Gan, L., Ly, N.G. and Steven, G.P., 1995, ‘‘A Study of Fabric Deformation Using Nonlinear Finite Elements’’, Textile Research Journal, Vol.65, No.11, pp.660-668.
  • 18. Yang, T.Y., 1973, ‘‘Matrix Displacement Solution to Elastica Problems of Beams and Frames’’, International Journal of Solids and Structures, Vol.9, No.7, pp.829-842.
  • 19. Zienkiewicz, O.C. and Taylor, R.L., 2005, ‘‘The Finite Element Method: Volume 2, Solid Mechanics’’, Butterworth Heinemann, Oxford.
  • 20. Reddy, J.N., 2004, ‘‘An Introduction to Nonlinear Finite Element Analysis’’, Oxford University Press, Oxford.
  • 21. Milner, H.R., 1981, ‘‘Accurate Finite Element Analysis of Large Displacements in Skeletal Frames’’, Computers & Structures, Vol.14, No.3-4, pp.205-210.
Textile and Apparel-Cover
  • ISSN: 1300-3356
  • Yayın Aralığı: Yılda 4 Sayı
  • Başlangıç: 1991
  • Yayıncı: Ege Üniversitesi
Sayıdaki Diğer Makaleler

İZOTAKTİK POLİPROPİLEN LİFLERİNİN YAPISAL KARAKTERİZASYONUNDA İNFRA-RED SPEKTROSKOPİ YÖNTEMİNİN KULLANIMI

İsmail KARACAN, Hüseyin BENLİ

ATMOSFERİK KOŞULLARDAKİ DEĞİŞİMİN BAZI DERİ FİZİKSEL ÖZELLİKLERİNE ETKİSİ

Bahri BAŞARAN, Behzat Oral BİTLİSLİ, Buğra OCAK, Ersin ÖNEM

DİKİŞ İPLİK ÖZELLİKLERİNİN VE DİKİŞ SIKLIKLARININ FARKLI DİKİŞ AÇILARINDA DİKİŞ MUKAVEMETİ ÜZERİNE ETKİLERİ

Fatma ÇİTOĞLU, Gülşah KAYA

KUMAŞ POROZİTESİNİN BELİRLENMESİNDE GÖRÜNTÜ MODELLEMESİNİN KULLANIMI: FILAMENT İPLİKLİ DOKUMA KUMAŞ

Erkan TÜRKER

DOĞAL ELYAF KARIŞIMLI POLİÜRETAN KOMPOZİTLERİN SES VE ISI YALITIM ÖZELLİKLERİNİN İNCELENMESİ

B. Yeşim BÜYÜKAKINCI, Nihal SÖKMEN, Haluk KÜÇÜK

TÜRK KONFEKSİYON ENDÜSTRİSİ İÇ ANALİZİ VE KÜRESELLEŞME STRATEJİLERİNİN DEĞERLENDİRİLMESİ

Selin Hanife ERYÜRÜK, Fatma KALAOĞLU, Murat BAKSAK

HAZIR GİYİM SEKTÖRÜNDE İŞÇİ SEÇİMİ VE EĞİTİMİ ÜZERİNE BİR ARAŞTIRMA

Gülseren KURUMER, Gülseren KARABAY, Sibel SEVER

UÇ BİRLEŞTİRME İŞLEMİ GÖRMÜŞ PAMUK/ELASTAN KARIŞIMLI ÖZLÜ İPLİKLERİN ÖZELLİKLERİNİ ETKİLEYEN PARAMETRELER

Burak BAYKALDI, Cankut TAŞKIN, Pelin Gurkan ÜNAL, Cihat ARIKAN, M. Fikri ŞENOL

KİTOSAN/TİTANDİOKSİT VE KİTOSAN/SİLİSYUMDİOKSİT HİBRİT SOL-JEL KAPLAMALAR İLE KAPLANMIŞ PAMUKLU KUMAŞIN ANTİBAKTERİYEL VE YAPISAL ÖZELLİKLERİNİN DEĞERLENDİRİLMESİ

Buket ARIK, Necdet SEVENTEKİN

YUVARLAK ÖRME MAKİNELERİ İÇİN ON-LİNE HATA KONTROL SİSTEMİ

Tuba KIRCI TORUN, Arzu MARMARALI