RİNG İPLİK EĞİRMEDE ENERJİ TASARRUFU: DAHA HAFİF MASURA KULLANIMI

Enerji tasarrufu, her alanda olduğu gibi tekstil sektöründe de büyük önem arz etmektedir. Bu çalışmada, ring iplik eğirme makinelerinde daha hafif masura kullanılarak elde edilen enerji tasarrufu iplik işletmesi şartlarında incelenmiştir. Daha ince et kalınlığına ve daha düşük yoğunluğa sahip kompozitlerin kullanımıyla elde edilen hafif masuralar, ciddi bir enerji tasarrufu sağlamaktadır. Bunun dışında daha ince et kalınlığı sayesinde aynı ölçülerdeki masura üzerine daha fazla iplik sarılabilmesi diğer bir avantajdır. 1000 saati aşkın yapılan kıyaslamalı enerji analizleri sonucunda; daha hafif masura kullanımıyla yıllık makine başı 33.5 MWh'e kadar enerji tasarrufunun mümkün olduğu görülmüştür. Masura üzerine daha fazla iplik sarılabilme olanağının avantajının getirdiği katkılarla birlikte toplam yıllık tasarruf, makine başı 1825 USD‘ye ulaşmaktadır.

ENERGY SAVING IN RING SPINNING: USE OF LIGHTER TUBE

Energy saving has a great importance in the textile industry as in every field. In this study, the energy savings achieved by using lighter tube in ring spinning machines were examined under spinning mill conditions. Light tube produced by using lower density composites and with thinner wall thickness provides significant energy saving. Another advantage is ability of winding more yarn on the same size tube thanks to thinner wall thickness. As a result of the comparative energy analysis over 1000 hours; Energy saving up to 33.5 MWh/year/machine was found possible with the use of lighter tubes. With the contribution of the advantage of being able to wind more yarn on the tube, the total savings can reach 1825 USD/machine/year.

PDF

___

1. Coskun E., Ogulata R.T., 2019. Kopça Ömrünün Ring İplik Makinasının Enerji Tüketimine Etkisinin İncelenmesi. UÇTEK 2019 Bildiriler Kitabı: 72-79.
2. Coskun, E. (2021). Research of Energy Consumption Affecting Factors in Short Staple Ring Spinning Machines and Developing A Computer Estimation Model. PhD Thesis, Cukurova University, Institute of Natural and Applied Sciences, Department of Textile Engineering, Adana-Turkey.
3. Hasanbeigi A., 2010. Energy-Efficiency Improvement Opportunities for the Textile Industry. China Energy Group Energy Analysis Department Environmental Energy Technologies Division, Ernest Orlando Lawrence Berkeley National Laboratory., 136 s.
4. Koç E., Kaplan E., 2007. An Investigation on Energy Consumption in Yarn Production with Special Reference to Ring Spinning. Fiber & Textiles in Eastern Eruope, 15, 4(63): 18-24.
5. Khurshid M.F., Asad M., Khan A.A., Chaudhry M.A., Ammanullah, 2012. Investigation of Specific Energy Consumption and Possible Reduction Measures of Textile Spinning Mills. Journal of American Science, 8(6): 535-542.
6. Magdi E. M., Naglaa H., Abeer M., 2012. Optimization of Specific Energy Consumption for Compact-spun Yarns. Indian Journal of Fibre & Textile Research, 37: 34-38.
7. Soliman H.A., 1963. Power requirements in cotton and worsted ring spinning. Doctoral Thesis, ETH – The Swiss Federal Institute of Technology, Zürich.
8. http://erbel.com.tr/gretener/. Access: May 2021.
9. http://agarwalpolyplast.com/products/energy-saving-tubes/. Access: May 2021.
10. http://t4texultants.com/carbon_ring_tube.html. Access: May 2021.
11. Kumar R.S., (2015). Process Management in Spinning, CRC Press Taylor and Francis Group, LLC, Boca Raton.
12. Rieter, (1999). Spinnhülse typ B. Maschinenfabrik Rieter AG.
13. https://www.globalpetrolprices.com/Turkey/electricity_prices/ Access: May 2021.
14. Gujar J., (2020). Economy in Spinning. Rieter India Private Limited.