Bazı tekstil liflerinin yüzeylerinin atomik kuvvet mikroskobu ile nano boyutta incelenmesi

Bu çalışmada bazı tekstil liflerinin yüzey özellikleri atomik kuvvet mikroskobu (AKM) yardımı ile incelenmiştir. Çalışmada işlem görmemiş, işlem görmüş (plazma ile yüzey modifikasyonu ve hava-jetli tekstüre) ve katkılı lifler olmak üzere üç grup lif kullanılmıştır. Yapılan çalışmalar sonucunda yüzey analizlerinde yaygın olarak kullanılan ve malzemelerin yüzeylerini nanometre seviyesinde görüntüleyebilen AKM'nin tekstil liflerinin yüzeylerini incelemek için de kullanılabilecek etkili bir yöntem olduğu görülmüştür.

Investigation of surface morphology of some textile fibres in nanoscale by atomic force microscopy

In this study the surface characteristics of some textile fibres were investigated by atomic force microscopy (AFM). In the study three main groups of fibres were used; fibres without any treatment, fibres with a treatment (plasma treatment and air-jet texturing) and fibres with additives. As a result we can confirm that AFM, which is widely used in surface characterization of materials in nanoscales is also a very powerful tool to analyse the surface features of textile fibres.

___

  • 1-Hsıeh, Y, (2001), Surface Characteristics of Polyester Fibers. n:C. M. Pastore and P. Kiekens (Editors), Surface Characteristics of Fibers and Textiles,Markel DekkerInc.,USA,p.33-57
  • 2-Erbil, H.Y., (2006), Surface Chemistry of Solid and Liquid nterfaces, Blackwell Publishing, India, 352 p.
  • 3-Vancso, J., Schön, P., Duvigneau, J., (2009), What's New in atomic Force Microscopy of Polymers ? An Update, Microscopy and Analysis, 120,5,5-11.
  • 4-Bınnıg, G., Quate C.F., Gerber Ch., (1986), Atomic Force Microscope, Physical Review Letters, 56,9,930-933.
  • 5-http://yunus.hacettepe.edu.tr/-yemrecan /stm/afm_ve_tar.htm, Erişim tarihi: 01.08.2008.
  • 6-Collier, B.J., Tortora, P.G., (2001), Understanding Textiles, Prentice Hall Publications, New Jersey, p. 152.
  • 7-Mather, R. R., Robson, D., Fotheringham, A. F., Neville, A., Wei, Q. F, Warren, J. M., (2003), Effects of Gas Plasma Treatments of Textiles on Their Technological and Aesthetic Properties, Proceedings of INTEDEC 2003, Section 7B.
  • 8-Koc, S. K., Hockenberger, A.S., Wei, Q., (2008), Effect of Air-jet Texturing on Adhesion Behaviour of Polyester Yarns to Rubber, Applied Surface Science, 254,7049-7055.
  • 9-Beers, D., Young, R.J., So, C.L., Sikkema, D.J., Perepelkin, K.E., Weedon, G., (2001), Other High Modulus-High Tenacity (HM-HT) Fibres From Linear Polymers. In:J.S.W. Hearle (Editor), High Performance Fibers, Woodhead Publishing Limited, Cambridge, p.93-101.
  • 10-http: //www.chembio.uoguelph.ca/educmat/chm729 /afm/firstpag.htm, Erişim tarihi: 01.05.2009.