___

1.Chou, T.W., Ko, F.K., (1989), Textile structural composites, Elsevier Science Publishers, Hollanda.

2.Lee, S., (1993), Handbook of Composite Reinforcements, VCH Publishers, Amerika.

3.Adanur, S.,1(1995),.Wellington Sears Handbook of Industrial Textiles. Technomic Publishing Company Inc, Amerika.

4.Richardson, M.O.W., Wisheart, MJ., (1996), Review of low-velocity impact properties of composite materials, Composites Part A, 27,1123.

5.Gommers, B., Verpoest, I., Van Houtte P., (1998), Analysis of knitted fabric erinforced composites: Part I Fibre Orienteation and distribution", Composites Part A, 29,1579.

6.Harrocks, A.R., Anand, S.C., (2000), Handbook of technical textiles., Woodhead Publishing Limited: Textile Institute, İngiltere.

7.Ramakrishna, S., Hull, D., (1993), Energy absorption capability of epoxy composite tubes with knitted carbon fibre fabric reinforcement, Composites Science and Technology, 49,349.

8.Kelay, M.S., Bader, D.L., Reed, P.E, (1997), Mechanical deformation mechanisms in knitted fabric composites, Journal of Thermoplastic Composite Materials, 10,76.

9.Leong, K.H., Ramakrishna, S., Huang, Z.M., Bibo, G.A., (2000), The potential of knitting for engineering composites—a review, Composites Part A, 31,197.

10.Raz, S., (1987), Warp Knitting Production, Verlag Mellieand Textilberichte GmbH, Almanya.

11.Raz, S. (1991), Flat Knitting, Meisenbach GmbH, Almanya.

12.Gibson, R.F., (1994), Principles of Composite Materials Mechanics, McGraw - Hill, Amerika..

13.Iyer, C., Mammel, B., Schaech, W., (1995), Circular Knitting, Meisenbach GmbH, Almanya.

14.Brotukhia, A.G., Bogolyubov, V.S., (1995), Composite Manufacturing Technology, Chapman and Hall, İngiltere..

15.Miravete, A,. (1999), 3D Textile Reinforcements in Composite Materials, Woodhead Publishing, İngiltere.

16.Jones, R.M., (1999), Mechanics of Composite Materials, Taylor and Francis, Amerika.

17.Demboski, G., Bogoeva-Gaceva, G., (2001), Properties of Weft Knitted Composites Affected by Preform Stretching, Applied Composite Materials, 8,6,371.

18.Padaki, M.V., Alagirumsamy, R., (2006), Knitted Preforms for Composite Applications, Journal of Industrial Textiles, 35,4,295.

19.Ramakrishna, S., Hull, D., (1994), Tensile behaviour of knitted carbon-fibre-fabric/epoxy laminates—Part I: Experimental, Composites Science and Technology, 50, 237.

20.Ramakrishna, S., Hull, D., (1994), Tensile behaviour of knitted carbon-fibre-fabric/epoxy laminates—Part II: prediction of tensile properties, Composites Science and Technology, 50,249.

21.Ramakrishna, S., Hamada, H., Rydin, R.W., Chou, T.W., (1995), Impact damage resistance of knitted glass fibre fabric reinforced polypropylene composites, Science and Engineering of Composite Materials, 4,2,61.

22.Wang, Y., Gowayed, Y., Kong, X., Li, J., Zhao, D., (1995), Properties and Analysis of Composites Reinforced with EGlass Weft-Knitted Fabrics, Journal of Composites Technology&Research, 17,4,283.

23.Ramakrishna, S., (1997), Characterization and Modeling of the tensile properties ofplain weft-knitfabric-reinforced composites, Composites Science and Technology, 57,1.

24.Leong, K.H., Falzon, P.J., Bannister, M.K., Herszberg, I., (1998), An investigation of the mechanical performance of Milano rib weft knitted glass/epoxy composites, Composites Science and Technology, 58,239.

25.Huang, Z.M., Ramakrishna, S., Diner, H.P., Tay, A.A.O., (1999), Characterization of a Knitted Fabric Reinforced Elastomer Composite, Jounal of Reinforced Plastics and Composites, 18,2,118.

26.Leong, K. H., Nguyen, M., Herszberg, I., (1999), The effects of deforming knitted glass fabrics on the basic composite mechanical properties, Journal of Materials Science, 34,2377.

27.Mouritz, A.P., Bannister, M.K., Falzon P.J., Leong, K.H., (1999), Review of applications for advanced three-dimensional fibre textile composites, Composites: Part A, 30,1445.

28.Lim, C.T., Ramakrishna, S., Ong, L.B., Huang, Z.M., (2001), Investigating the effects of anisotropy of knitted fabric reinforced polymer (KFRP) composite, Journal of Reinforced Plastics and Composites, 20,8,685.

29.Khondker, O.A., Leong, K.H., Herszberg, I., (2001), Effects of biaxial deformation of the knitted glass preform on the in-plane mechanical properties of the composite, Composites Part A, 32,1513.

30.Khondker, O.A., Herzberg, I., Leong, K.H., (2001), An investigation of the structure-property relationship of knitted composites, Journal of Composite Materials, 35, 6,489.

31.Bini, T.B., Ramakrishna, S., Huang, M.Z., Lim, T.C., (2001), Structure-tensile Property Relationship of Knitted Fabric Composites, Polymer Composites, 22,1,11.

32.Huang, Z. M., Teng, X.C., Ramakrishna, S., (2001), Progressive Failure Analysis of Laminated Knitted Fabric Composites under 3-Point Bending, Journal of Thermoplastic Composite Materials, 14,499.

33.Luo, Y., Verpoest, I., (2002),.Biaxial tension and ultimate deformation of knitted fabric reinforcements, Composites Part A, 33,197.

34.Falconnet, D., Bourban, P.E., Pandita, S., Manson, J.A.E., Verpoest, I., (2002), Fracture toughness of weft-knittedfabric composites, Composites PartB, 33,579.

35.Lam, S.W., Xue, P., Tao, X.M., Yu, T.X., (2003), Multi-Scale study of tensile properties and large deformation mechanisms of polyethylenete-repthalate/polypropylene knitted composites, Composites Science and Technology, 63,1337.

36.Huang, Z.M., (2004), Progressive flexural failure analysis of laminated composites with knitted fabric reinforcement, Mechanics of Materials, 36,239.

37.Pandita, S.D., Verpoest, I., (2004), Tension-tension fatigue behaviour of knitted fabric composites, Composite Structures, 64,199.

38.Dev Giri, V.R., Swarna, A., Madhusoothanan, M., (2005), Mechanical properties of knitted composites using glass ply yarns, Journal of Reinforced Plastics and Composites, 24,13,1425.

39.Khondker, O.A., Leong, K.H., Herszberg, I., Hamada, H., (2005), Impact and compressionafter-impact performance of weft-knitted glass textile composites, Composites Part A, 36,5,638.

40.Duhovic, M., Bhattacharyya, D., (2006), Simulating the deformation mechanisms of knittedfabric composites, Composites Part A, 37,11,1897.

41.Zhangyu, F.Z., Yanmo, C., Hairu, L., (2006), Tensile properties of glass fiber knitted fabric reinforced polypropylene composite made from GF/PP commingled yarn affected by prestretching, Journal of Reinforced Plastics and Composites, 25,5,553.

42.Zhangyu, F.Z., Yanmo, C., Hairu, L., (2006), Investigation on the tensile properties of knitted fabric reinforced composites made from GF-PP commingled yarn preforms with different loop densities, Journal of Thermoplastic Composite Materials, 19,1,113.

43.Tercan, M., Asi, O., Yüksekkaya, M.E., Aktas, A., (2007), Comparison of tensile properties of weft-knit 1 xl rib glass/epoxy composites with different location layers, Material Design, 28,2172.

44.Tercan, M., Asi, O., Aktas, A., (2007),^/? experimental investigation öf the bearing strength of weft knitted lxl rib glass fibre composites, Composite Structures, 78,3,392.

45.Rios, C.R., Ogin, S.L., Lekakou, C., Leong, K.H., (2007), A study of damage development in a weft knitted fabric reinforced composite. Part 2: Stress-strain and early cyclic behaviour of composite laminates with realisticfabric layups, Composites Part A, 38,1794.

46.Asi, O., Aktaş, A., Tercan, M., Yüksekkaya, M.E., (2010, originally published online 2008), Effect of knitting tightness on mechanical properties of weft knitted glass fibre reinforced epoxy composites, Journal of Reinforced Plastics and Composites, 29,1,86.

47.Tercan, M., Aktas, M., (2009), Buckling behavior of lxl rib knitting laminated plates with cutouts, Composite Structures, 89,2,245.

48.Alpyildiz , T., Icten, B.M., Karakuzu, R., Kurbak, A., (2009), The effect of tuck stitches on the mechanical verformance of knitted fabric reinforced composites, Composite Structures, 89,3,391.

49. Stolyarov, O.N., (2009), Mechanical properties of Polymer Composites Reinforced with knit fabrics made of High-strength aramidfibres, Fibre Chemistry, 41,1,53.

50.Naveen, V. R, Vani, A., Prakasha, V., Divakar, C.J., Ananthkrishnan, T.,. Rao, R. M. V. G. K., (2000), Studies m Mechanical Behaviour of Knitted Glass-Epoxy Composites, Journal of Reinforced Plastics and Composites, 19,396.

51.Sugun, B. S., Rao, R.M.V.G.K.,(2000), Drop Weight rmpact Studies on Rib-Knit RTM Laminates, Journal of Reinforced Plastics and Composites, 19,492.

52.Van Vuure A.W., Ko, F. K., Beevers, C., (2003), Net-Shape Knitting for Complex Composite Preforms, Textile 'les. Journal, 73,1, 1.

53.Khondker, O.A., Fukui, T. , Nakai, A., Hamada, H., 2004), Initial fracture of the welt weft-knitted textile composites, Composites Part A, 35,1185.

54.Liu, W., Sun, B., Hu, H., Gu, G., (2007), Compressive 3ehçıvior of Biaxial Spacer Weft Knitted Fabric Reinforced Composite at Various Strain Rates, Polymer Composites, )OI 10.1002/pc.20248,224-232

55.Araujo, M., Fangueiro, R., Soutinho, F., (2009), mproving the stiffness of unidirectionally oriented weft-znitted structures for polymer matrix composite •einforcement, Journal of the Textile Institute, 100,8,715.

56. Abounaim, Md., Hoffmann, G., Diestel, O., Cherif, 1, (2009), Development of Flat Knitted Spacer Fabrics or Composites using Hybrid Yarns and Investigation of rwo-dimensional Mechanical Properties, Textile lesearch Journal, 79,596.

57.Abounaim, Md., Hoffmann, G., Diestel, O., Cherif, C., 2010), Thermoplastic composite from innovative flat nitted 3D multi-layer spacerfabric using hybrid yarn and he study of 2D mechanical properties, Composites Science and Technology, 70,363.

58.Hu, H., Sun, B., Sun, H., Gu, B., (2010 originally published online 2009), A Comparative Study of the Impact Response of 3D Textile Composites and Aluminum Plates, Journal of Composite Materials, 44,593.

59.Cherif, C., Rödel, H., Diestel, O., Hoffmann, G., Herzberg, C., Torun, A. R., (2004) Development of innovative spacer preforms for function Integrated composite production, Autex 2007, 26-28 Haziran 2004, Tampere Finlandiya.

60.Fangueiro, R., Nunes, P., Soutinho, F., Araujo, M., (2009), Development of fibrous preforms for FRP pipe connections, Composites Science and Technology, 69, 1412.

61.Anand, S.C., Sarsby, R.W., Pritchard, M., (2002), Patent NO: GB2339803A

62.Steiger ITEMA Knitting, Atkılı Düz Örme Makineleri Katalogu.

63.Offermann,P.,Hoffmann, G.,Engelmann,U., (2001), Patent NO: US6244071B1

64.Cebulla, H., Diestel,O., Offermann, P., (2002), Fully fashioned biaxially knitted fabrics, Autex Research Journal, 2,1,9.