The compression characteristic of weft knitted spacer fabrics

Sandviç tekstiller iki kumaş tabakasının bir bağlantı ipliği veya tabakası ile bağlanması sonucu elde edilen üç boyutlu yapılardır. Sandviç kumaşların karakteristik özellikleri, çeşitli alanlarda artan kullanımlarından ötürü araştırmacılar açısından dikkat çekici bir konu haline gelmiştir. Bu çalışmada, sandviç kumaşların en önemli özelliklerinden biri olan sıkıştırılabilirlik özelliği incelenmiştir. Atkı örme sandviç kumaş numuneleri üç farklı kapak yüksekliğinde, farklı bağlantı ipliği ve kumaşların ön ve arka yüzlerinde farklı materyaller kullanılarak üretilmiştir. Araştırma sonucunda sandviç kumaşların sıkıştırılabilirlik dayanımının bağlantı iplik tipi, kapak yüksekliği ve yüzeyde kullanılan materyalden önemli düzeyde etkilendiği tespit edilmiştir. Kapak yüksekliği arttıkça bağlantı ipliği monofilament olan ve yüzeylerde polyester kullanılan sandviç kumaşların daha yüksek sıkıştırılabilirlik dayanımına sahip olduğu elde edilen sonuçlar arasında yer almaktadır.

Atkı örme sandviç kumaşların sıkıştırılabilirlik özellikleri

Spacer fabrics are three dimensional knitted fabrics which consist of two fabric layers combining with a spacer yarn. The characteristics of spacer fabrics become a highly interested concept for textile researchers because of increasing usage in various areas. In this study the compression characteristic which is one of the important properties of spacer fabrics was investigated. Weft knitted spacer fabric samples were produced using different spacer yarn types and various materials for back and face surfaces of the fabrics for three different dial heights. It was found that the compression resistance of the spacer fabrics is significantly affected from the spacer yarn type, dial height and surface material. The spacer fabrics with polyester surfaces and monofilament spacer yarn have higher compression resistance as the dial height increases.

___

  • 1. Mecit Armakan, H.D., 2007, Sandviç Tekstiller, Tekstil ve Konfeksiyon, 17(4):224-231.
  • 2. http://polynovacomposites.blogspot.com [Accessed 06.02.2012].
  • 3. Bruer, S.M., Powell, N., Smith, G., 2005, “Three Dimensionally Knit Spacer Fabrics: a Review of Production Techniques and Applications”, Journal of Textile and Apparel, Technology and Management, 4 (4), pp:1-30.
  • 4. Murthyguru, I., 2005, “Novel Approach to Study Compression Properties in Textile”, Autex Research Journal, Vol. 5, No 4, pp. 176-193.
  • 5. Huang, W., Ghosh, T.K., 1999, “Online Measurement of Fabric Mechanical Properties: Compressional Behaviour”, Textile, Fiber and Film Industry Technical Conference, pp.1-6.
  • 6. Ertekin, G., Marmaralı, A., 2011, “Heat, Air and Water Vapor Transfer Properties of Circular Knitted Spacer Fabrics”, Tekstil ve Konfeksiyon, 21(4): 369-373.
  • 7. Postle, R., 1974, “A Geometrical Assessment of the Thickness and Bulk Density of Weft Knitted Fabrics”, Journal of the Textile Institute, 65 (4), pp.155- 163.
  • 8. Ajayi, J. O., Elder, H. M., 1997, “Fabric Friction, Handle and Compression”, Journal of the Textile Institute, 88 (3), 232-241.
  • 9. Aliouche, D., Viallter, P., 2000, “Mechanical and Tactile Compression of Fabrics: Influence on Handle”, Textile Research Journal, 70 (11), pp. 939-944.
  • 10. Taylor, P.M., Pollet, D.M., 2002, “Static Low-Load Lateral Compression of Fabrics”, Textile Research Journal, 72 (11), pp. 983- 990.
  • 11. Mukhopadhyay, A., Kaushik, R. C. D., Kothari, V. K., 2003, “Bulk Characteristics of Air-Jet Textured Yarn Knitted Fabrics, Indian Journal of Fibre & Textile Research, 28, pp.36-41.
  • 12. Soe, A. K., Matsuo, T., Takahashi, M., Nakajima, M., 2003, “Compression of Plain Knitted Fabrics Predicted from Yarn Properties and Fabric Geometry, Textile Research Journal, 73(10), pp. 861-866.
  • 13. Xu-hong, M., Ming-qiao, G., 2008, “The Compression Behaviour of Warp Knitted Spacer Fabric”, Fibers and Textiles in Eastern Europe, Vol.16, No.1 (66), pp.90-92.
  • 14. Mecit Armakan, D., Roye, A., 2009, “A Study on the Compression Behaviour of Spacer Fabrics Designed for Concrete Applications”, Fibers and Polymers, 10 (1), pp.116-123.
  • 15. Vassiliadis, S., Kallivretaki, A., Provatidis, N., 2009, “Numerical Modeling of the Compressional Behavior of Warp-Knitted Spacer Fabrics”, Fiber and Textile in Eastern Europe, 17(5), pp. 56-61.
  • 16. Mecit, D., Roye, A., 2009, “Investigation of a Testing Method for Compression Behavior of Spacer Fabrics Designed for Concrete Applications”, Textile Research Journal, 79 (10), pp. 867-875.
  • 17. Mokhtari, F., Shamshirsaz, M., Latifi, M, Maroufi, M., 2010, “Theoretical Expression of Compressibility Behaviour of Warp Knitted Spacer Fabrics”, 7th International Conference - TEXSCI 2010, Czech Republic.