Mehmet Emin YÜKSEKKAYA, Thomas HOWARD, Sabit ADANUR

INFLUENCE OF THE FABRIC PROPERTIES ON FABRIC STIFFNESS FOR THE INDUSTRIAL FABRICS

ISSN: 1300-3356
Yayın Aralığı: Yılda 4 Sayı
Yayıncı: Ege Üniversitesi Tekstil ve Konfeksiyon Araştırma & Uygulama Merkezi

Flexural rigidity of a fabric is among the important properties, especially for industrial applications of high performance fabrics. The relationships between various fabric properties and fabric stiffness were analyzed. Several monofilament fabrics were tested in the warp direction for this purpose. It was found that there were close relationships between fabric stiffness and warp diameter, filling diameter, fabric modulus and fabric density. As yarn diameters and fabric modulus increase, the stiffness of fabric also increases. It was evident that fabric design has also an effect on fabric stiffness for the tested fabrics. The measured fabric stiffness values were compared with theoretical calculations that showed good agreement

Keywords:

Flexural rigidity, Stiffness, Industrial fabric,

PDF

___

1. Peirce, F. T., 1930, “The Handle of Cloth as a Measurable Quantity”, J. Text. Int. T377-T416.
2. Guthrie, J. C., Morton, D. H., and Oliver, P. H., 1954, “An Investigation Into Bending and Torsional Rigidities of Some Fibers”, J. Text. Int. T912-T928.
3. Cooper, D. N. E., 1965, “The Stiffness of Woven Textiles”, J. Text. Inst. T317-T335.
4. Gere, J. M., 2003 Mechanics of Materials, 5nd Edition, PWS Engineering, Boston, Massachusetts.
5. Nash, W. A.,1972, Strength of Materials, 2nd Edition, McGraw-Hill, New York.
6. Tuma, J. J., 1993, Structural Analysis, McGraw-Hill, New York.
7. Standard Test Methods for Stiffness of Fabrics, D1388, American Society for Testing and Materials (ASTM) Book of Standards, Section 7, Vol 07.01, Philadelphia, 1993.
8. Montgomery, D. C., 2005, Design and Analysis of Experiments, 6th Edition, John Wiley & Sons, New York.
9. Lord, P. R. and Mohamed, M. H., 1982, Weaving: Conversion of Yarn to Fabric, Merrow Technical Library.